INTERACT FORUM

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: Ipod Icon Not Recognized in MC9  (Read 1731 times)

Chrispod

  • Regular Member
  • Recent member
  • *
  • Posts: 36
  • nothing more to say...
Ipod Icon Not Recognized in MC9
« on: June 01, 2003, 03:15:05 pm »

Hi There:  I'm hoping I can get some help here.  MC( has been an improvement over MMJB and Ephpod, etc., but even though iPod is recognized with it's letter (F) in My Computer, it takes me about a half hour to an hour of starting and re-starting to become recognized by MC9.
Disabling the Norton doesn't help, and there's nothing else on.  When I finally get it connected, it's a breeze, except for one thing:  I recently restored because I downloaded songs (whole CDs burned here) to the iPod, and even though it went through the whole proccess, the songs were not on the iPod, but that's a side matter.  I need to be able to plug in and BE SEEN IMMEDIATELY.  I should note, that I have taken this Q to Adam at iPodlounge, and we couldn't come up with a  solution.  Thanks, Christopher
Logged

SteveG

  • Regular Member
  • Citizen of the Universe
  • *****
  • Posts: 5442
Re: Ipod Icon Not Recognized in MC9
« Reply #1 on: June 01, 2003, 05:15:02 pm »

Christopher,

Is there anything special that you do when it finally is recognized?  What is the volume label on the iPod? If not "IPOD" try naming it that and see if it helps.

Steve

Logged

Chrispod

  • Regular Member
  • Recent member
  • *
  • Posts: 36
  • nothing more to say...
Re: Ipod Icon Not Recognized in MC9
« Reply #2 on: June 02, 2003, 05:22:01 am »

Yeah, Steve for the month of trying out MC9 I have wracked my brain to figure that out!  No, I haven't come up with anything in common each time.  I did name it iPod (the letter F, is that what you mean?).  It shows up in the drop down tree (always when plugged in) in MC9, and shows up in the safely disconnect.  I have the top Gateway laptop, and have installed the adaptec firewire bus, but it's the Gateway firewire that ends up working.
One thing is, if I have done something different, like use the burner or listen to music, and the F is not at the target, it takes forever to get it back there.

Also of note, I've had my iPod since Christmas, and having MC9 is the first time I am able to see the F being recognized, because of course with other programs, you can't actually see the connection.  This way my frustration is at least spelled out.

Thanks Christopher
Logged

SteveG

  • Regular Member
  • Citizen of the Universe
  • *****
  • Posts: 5442
Re: Ipod Icon Not Recognized in MC9
« Reply #3 on: June 02, 2003, 05:55:22 am »

Quote
Also of note, I've had my iPod since Christmas, and having MC9 is the first time I am able to see the F being recognized, because of course with other programs, you can't actually see the connection.  This way my frustration is at least spelled out.


Are you saying that you have similar problems when running other applications? If so, this would definitely point to a hardware problem. Another possibility is that it is a MusicMatch issue. I had a somewhat similar experience when I had MusicMatch installed. The reason was that MusicMatch insidiously kept trying to take control of my Ipod. If you have MusicMatch installed, try renaming the MusicMatch folder to something else and that will resolve the problem (assuming that this is your problem).
Logged

Kurt Young

  • Regular Member
  • Citizen of the Universe
  • *****
  • Posts: 633
  • Tastes like crab, talks like people.
Re: Ipod Icon Not Recognized in MC9
« Reply #4 on: June 02, 2003, 07:08:51 am »

Can you post your system info for us?  I have an idea...
Logged
 mjextman.exe /ipodsync

Chrispod

  • Regular Member
  • Recent member
  • *
  • Posts: 36
  • nothing more to say...
Re: Ipod Icon Not Recognized in MC9
« Reply #5 on: June 02, 2003, 06:58:31 pm »

Here is my system:

OS Name      Microsoft Windows XP Professional
Version      5.1.2600 Service Pack 1 Build 2600
OS Manufacturer      Microsoft Corporation
System Name      MISSIONDESK
System Manufacturer      Gateway
System Model      Gateway 600
System Type      X86-based PC
Processor      x86 Family 15 Model 2 Stepping 4 GenuineIntel ~1595 Mhz
BIOS Version/Date      Gateway 31.00.20, 4/18/2002
SMBIOS Version      2.31
Windows Directory      C:\WINNT
System Directory      C:\WINNT\System32
Boot Device      \Device\HarddiskVolume1
Locale      United States
Hardware Abstraction Layer      Version = "5.1.2600.1106 (xpsp1.020828-1920)"
User Name      MISSIONDESK\Administrator
Time Zone      Eastern Standard Time
Total Physical Memory      256.00 MB
Available Physical Memory      57.35 MB
Total Virtual Memory      880.93 MB
Available Virtual Memory      382.91 MB
Page File Space      625.95 MB
Page File      C:\pagefile.sys

Thanks, Christopher
Logged

Chrispod

  • Regular Member
  • Recent member
  • *
  • Posts: 36
  • nothing more to say...
Re: Ipod Icon Not Recognized in MC9
« Reply #6 on: June 02, 2003, 07:10:56 pm »

To Steve G:

I had uninstalled the MMJB from my system, and true to Adam's words, it had wormed it's way into the system! There were 9(!) files left which I got rid of.

My iPod has been sent back, for an unrelated problem (the second time getting a new one) but I wanted to work some of this out.  Thanks guys, I can't wait to hear the plan the SYSTEMS guy has!!!

Christopher
Logged

Chrispod

  • Regular Member
  • Recent member
  • *
  • Posts: 36
  • nothing more to say...
Re: Ipod Icon Not Recognized in MC9
« Reply #7 on: June 03, 2003, 09:32:24 am »

My partner's brand-new iPod came today.  A new generation 10G, it arrived fully charged, and was quickly recognized by MC9 on letter (E), rather than the letter (F) that mine comes in on.  I quickly d/l a playlist of about 600 songs, and they appeared in the iPod's directory in MC9.  When I "safely disconected" a (!) with a file folder appeared in the window.  I then restored (iPod was recognized there quickly) and the quick recharge bar that appears on my older 20G iPod didn't appear, but the (!) remained.  It's now recharging with the words "disk Mode" along the top, and no recharge icon going across the front.  Are we OK, and recharging?  And what about the letter E rather than F?
I await answers also on the previous posts concerning my 20G iPod.  Thanks, CMB
Logged

SteveG

  • Regular Member
  • Citizen of the Universe
  • *****
  • Posts: 5442
Re: Ipod Icon Not Recognized in MC9
« Reply #8 on: June 03, 2003, 11:12:19 am »

Christopher,

In regards to the different drive letter being assigned, this is a normal way for your PC to treat seaparte removable drive devices.

Quote
Are we OK, and recharging?


Probably.

Quote
I await answers also on the previous posts concerning my 20G iPod.


Could you restate the question?

Steve
Logged
Pages: [1]   Go Up