INTERACT FORUM

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: Canīt play input format 88,200 and 176,400  (Read 2050 times)

Silen

  • Recent member
  • *
  • Posts: 7
Canīt play input format 88,200 and 176,400
« on: April 25, 2019, 02:05:58 pm »

Hi,
 Can't play files with input format 88,200Hz and 176,400Hz, flac. Error messages "playback could not be started" and "something went wrong with playback appears. See attached files.
All other formats works. The files can be played if output format is changed to other than above.
Running MC25 on Win 10. using Dirac audio processor and USB dac,  WASAPI. The same error occurs if Dirac audio processor is not running.

Best regards
Logged

Awesome Donkey

  • Administrator
  • Citizen of the Universe
  • *****
  • Posts: 7893
  • Long cold Winter...
Re: Canīt play input format 88,200 and 176,400
« Reply #1 on: April 25, 2019, 02:22:15 pm »

Open the Player menu > DSP Studio > Output Format and try changing the 88,200 Hz and 176,400 Hz output options to 96,000 Hz and 192,000 Hz inputs and see if they work then.
Logged
I don't work for JRiver... I help keep the forums safe from "male enhancements" and other sources of sketchy pharmaceuticals.

Windows 11 24H2 Update 64-bit + Ubuntu 24.10 Oracular Oriole 64-bit | Windows 11 24H2 Update 64-bit (Intel N305 Fanless NUC 16GB RAM/500GB M.2 NVMe SSD)
JRiver Media Center 33 (Windows + Linux) | iFi ZEN DAC 3 | JBL 306P MkII Studio Monitors | Audio-Technica ATH-M50x Headphones

Silen

  • Recent member
  • *
  • Posts: 7
Re: Canīt play input format 88,200 and 176,400
« Reply #2 on: April 25, 2019, 02:35:46 pm »

The files can be played if output format is changed to other sampling freq than 88 and 176.
Logged

Awesome Donkey

  • Administrator
  • Citizen of the Universe
  • *****
  • Posts: 7893
  • Long cold Winter...
Re: Canīt play input format 88,200 and 176,400
« Reply #3 on: April 25, 2019, 02:36:13 pm »

It's quite possible (and likely) your DAC doesn't support 88.2 kHz nor 176.4 kHz sample rates, thus why you'd need to resample them to 96 kHz and 192 kHz sample rates.
Logged
I don't work for JRiver... I help keep the forums safe from "male enhancements" and other sources of sketchy pharmaceuticals.

Windows 11 24H2 Update 64-bit + Ubuntu 24.10 Oracular Oriole 64-bit | Windows 11 24H2 Update 64-bit (Intel N305 Fanless NUC 16GB RAM/500GB M.2 NVMe SSD)
JRiver Media Center 33 (Windows + Linux) | iFi ZEN DAC 3 | JBL 306P MkII Studio Monitors | Audio-Technica ATH-M50x Headphones

Silen

  • Recent member
  • *
  • Posts: 7
Re: Canīt play input format 88,200 and 176,400
« Reply #4 on: April 25, 2019, 02:50:14 pm »

Thanks,
 but according to the owners manual (Rotel RA-1570) it shall be supported. :
PC-USB Format: "Format determined by the media Player/server software that You use" "Notes: Any supported format by the PC software: 44.1K, 48k, 88.2, 96K, 176.4K 192 K 16 bit, 24 bit"
Logged

JimH

  • Administrator
  • Citizen of the Universe
  • *****
  • Posts: 72541
  • Where did I put my teeth?
Re: Canīt play input format 88,200 and 176,400
« Reply #5 on: April 26, 2019, 12:17:02 am »

It's not uncommon for a manual to claim support for something that doesn't work.
Logged

RD James

  • Citizen of the Universe
  • *****
  • Posts: 1871
Re: Canīt play input format 88,200 and 176,400
« Reply #6 on: April 26, 2019, 04:44:14 am »

Are you using Windows 10's UAC2 drivers, or have you installed Rotel's driver for the device? http://rotel.com/usb-drivers
Does Windows' sound control panel list 88200 Hz as a supported format?
Logged

bulldogger

  • World Citizen
  • ***
  • Posts: 191
Re: Canīt play input format 88,200 and 176,400
« Reply #7 on: May 01, 2019, 05:50:30 pm »

If your PC doesn't support 88.2khz or 176.2khz it will not output it. Either the motherboard has to support it or the GPU if  you are using HDMI.
Logged

Silen

  • Recent member
  • *
  • Posts: 7
Re: Canīt play input format 88,200 and 176,400
« Reply #8 on: May 06, 2019, 01:51:29 pm »

I have installed Rotel driver for the device audio class 2.0 (can play 192kHz files). But  Windows' sound control panel (Dirac processor) does NOT list 88kHz or 176KHz as a supported format,
Logged
Pages: [1]   Go Up