Help with Australian HDHomerun
Hi
MC25 HDHomerun Connect (dual tuner) Wind10
The newtwork tuner displays "no signal".
Background: I recently lost internet on my NBN wireless internet in the hunter valley. Telstra, as usual, no help. Turns out the "indoor unit" was showing low signal strength but modem all green lights. A hard reboot of the indoor unit (not modem) restored internet, albeit 3 mbps.....and still low signal strength displaying on indoor unit.
When the internet was down (prior to restoring internet) soon afterwards the HDhomerun network tuner started showing "No signal". What signal I asked myself.If I unplugged the OTA antenna connection and plugged it into the samsung TV directly, perfect OTA signal.The home network still worked....and now the internet (although not required??) was restored but the HDHomerun still said "No signal".
Within MC the "tuner status" was "initializing" for both tuners. The two LED on the right of the HDHomerun not lit. Hmmn. Reboot the HDHomerun. No change. Reboot the win 10 pc, eureka...within MC one tuner showed "scanning", the other tuner "idle". After a few minutes scanning, both tuners went to "idle". Great....but selecting from the OTA guide still "NO SIGNAL".
Strangely, through all this the OTA guide remained on screen and time display continuously updating.
We have had high winds in the Valley but clearly the OTA TV rooftop antenna is working fine.It is possible that the NBN outdoor antenna has shifted to explain low signal strength, or maybe something in the tower shifted (we otherwise have direct line of sight to the tower with previously excellent signal strength).
Still, I am puzzled as to what "signal" the HDHomerun is not getting, given that internet is now working (slowly), home network is functional, and the OTA TV signal is working.
Apologies for long post. TIA
David
