INTERACT FORUM

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: CD burn problem  (Read 1858 times)

wpbmusic

  • Regular Member
  • Recent member
  • *
  • Posts: 7
  • I'm a llama!
CD burn problem
« on: December 27, 2003, 01:46:32 pm »

After burning several CD's without a problem, I'm now getting this popup when I hit the burn button

Can't Start The Write!

Media Center Registered 9.1.316 -- C:\Program Files\J River\Media Center\

Microsoft Windows XP  Workstation 5.1 Service Pack 1 (Build 2600)
Intel Pentium 4 1681 MHz MMX / Memory: Total - 261 MB, Free - 99 MB

Internet Explorer: 6.0.2800.1106 / ComCtl32.dll: 5.82 (xpsp1.020828-1920) / Shlwapi.dll: 6.00.2800.1276 / Shell32.dll: 6.00.2800.1233 (xpsp2.030604-1804) / wnaspi32.dll: 4.71 (0001) , ASPI for Win32         DLL, Copyright © 1989-2002 Adaptec, Inc. / Aspi32.sys: 4.71 (0001)

Ripping /   Drive D:   Copy mode:Normal   CD Type:Auto   Read speed:Max
  Drive E:   Copy mode:Normal   CD Type:Auto   Read speed:Max
  Digital playback: Yes /  Use YADB: Yes /  Get cover art: No /  Calc replay gain: No /  Copy volume: 32767
  Eject after ripping: No /  Play sound after ripping: No  

Burning /  Drive E: HL-DT-ST CD-RW GCE-8160B    Addr: 1:1:0  Speed:16  MaxSpeed:16  BurnProof:Yes
  Test mode: No /  Eject after writing: Yes /  Direct decoding: Yes /  Write CD-Text: No
  Use playback settings: No /  Normalization: None
Logged

gseale

  • Regular Member
  • Recent member
  • *
  • Posts: 5
  • I'm a llama!
Re:CD burn problem
« Reply #1 on: December 28, 2003, 06:21:47 pm »

I am fairly new with this product, but am getting the same error?

Media Center Registered 10.0.22 -- D:\Program Files\J River\Media Center\

Microsoft Windows XP  Workstation 5.1 Service Pack 1 (Build 2600)
Intel Pentium 4 2398 MHz MMX / Memory: Total - 1047 MB, Free - 356 MB

Internet Explorer: 6.0.2800.1106 / ComCtl32.dll: 5.82 (xpsp1.020828-1920) / Shlwapi.dll: 6.00.2800.1276 / Shell32.dll: 6.00.2800.1233 (xpsp2.030604-1804) / wnaspi32.dll: N/A
Ripping /   Drive E:   Copy mode:Normal   CD Type:Auto   Read speed:Max
  Drive F:   Copy mode:Normal   CD Type:Auto   Read speed:Max
  Digital playback: Yes /  Use YADB: Yes /  Get cover art: Yes /  Calc replay gain: Yes /  Copy volume: 32767
  Eject after ripping: Yes /  Play sound after ripping: Yes  Soundfile:   C:\WINDOWS\Media\Aquarium Recycle.wav

Burning /  Drive F: HL-DT-ST CD-RW GCE-8523B    Addr: 4:0:0  Speed:48  MaxSpeed:52  BurnProof:Yes
  Test mode: No /  Eject after writing: Yes /  Direct decoding: Yes /  Write CD-Text: No
  Use playback settings: No /  Normalization: None
Logged

JohnT

  • Citizen of the Universe
  • *****
  • Posts: 4627
Re:CD burn problem
« Reply #2 on: December 29, 2003, 08:10:56 am »

Could one or both of you please send me a log file of the burn process? Here are the instructions:

Turn on MC's logging for CD burning by changing the value of this registry key from zero (0) to one (1):
 
HKEY_LOCAL_MACHINE\SOFTWARE\JRiver\Media Jukebox\CD Writer\Logger
 
Then just start up Media Center and try to burn a CD (you can leave test mode checked to avoid creating a coaster). Then exit MC and find a file in the MC program directory called "cdwriter.log" and email that to me. Remember that the log file is overwritten each time you start up MC, so you must send the file before restarting MC.
 
Thanks!
John T.
JRiver, Inc.
johnt @ jriver.com
Logged
John Thompson, JRiver Media Center

gseale

  • Regular Member
  • Recent member
  • *
  • Posts: 5
  • I'm a llama!
Re:CD burn problem
« Reply #3 on: December 29, 2003, 08:49:47 am »

John,

I have zipped up (5MB) and attached the log file to an email.

Thanks
 
Greg
Logged

JohnT

  • Citizen of the Universe
  • *****
  • Posts: 4627
Re:CD burn problem
« Reply #4 on: December 29, 2003, 09:37:08 am »

I don't think it made it. Probably too large, even after zipping. The next cdwriter control will have much less log information, but for now, maybe you could go into an editor and chop off the first 1/2 or 3/4 of the log file and just send me the last section? Remember to remove the spaces from my email address.

Thanks!
johnt @ jriver.com

Logged
John Thompson, JRiver Media Center

gseale

  • Regular Member
  • Recent member
  • *
  • Posts: 5
  • I'm a llama!
Re:CD burn problem
« Reply #5 on: December 29, 2003, 01:17:55 pm »

John,

Done...and I did remove the spaces, both times. :)

Greg
Logged

JohnT

  • Citizen of the Universe
  • *****
  • Posts: 4627
Re:CD burn problem
« Reply #6 on: December 29, 2003, 05:31:06 pm »

Sorry about that. Our spam filter system got over-active.
Try unchecking the "decode directly" option. How many tracks are you burning, are you near capacity? If so, try reducing the number of tracks.
Logged
John Thompson, JRiver Media Center

Markeau

  • Regular Member
  • Galactic Citizen
  • ****
  • Posts: 298
Re:CD burn problem
« Reply #7 on: December 29, 2003, 06:06:11 pm »

FWIW I have a newish Pioneer DVR A06/106 DVD burner and get that "Can't start the Write" popup when the total time of tracks is over the size of the cdr.  Ie, for an 80min cdr the total time of tracks cannot be even just 80min 1sec.  (I never saw this popup with my old Yamaha cd burner which I overburned quite a bit with ... so either the new Pioneer burner absolutely will not overburn, or some kind of new behavior started with MC9.x about 6 months ago.)
Logged

gseale

  • Regular Member
  • Recent member
  • *
  • Posts: 5
  • I'm a llama!
Re:CD burn problem
« Reply #8 on: December 29, 2003, 08:24:21 pm »

I was able to resolve the first issue by removing the "Decode Files Directly to CD, but am now getting an error about not enough disk space being available for the conversion. Your temp music disk space has 0 free and you need
-958361249 bytes to convert all tracks. I've tried changing my temp to c:\temp and d:\temp (where I have 100GB free on both) and I get the same error. ?

Any ideas?

Thanks
Logged

shAf

  • Regular Member
  • Citizen of the Universe
  • *****
  • Posts: 863
Re:CD burn problem
« Reply #9 on: December 30, 2003, 12:01:39 pm »

I seem to have gotten past a similar can't start the write problem.  For some reason MC9.1.316 may not have liked my Oggs, even though MC plays them properly.  I rip'd them again to MP3's and the write proceeded normally (... although I am still experiencing fatal errors if I try to enable DSP effects).

Happy New Year!!!  :)
Logged
cheerios from the Avalon Peninsula, Newfoundland
Pages: [1]   Go Up