INTERACT FORUM

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: How to upgrade to Ver. 11?  (Read 2557 times)

wonmug

  • Regular Member
  • Junior Woodchuck
  • **
  • Posts: 50
  • Don't worry, I'm always like this!
How to upgrade to Ver. 11?
« on: September 23, 2004, 06:59:43 am »

Excuse this old man for being so dense, but I cannot for the life of me find out how to upgrade from Version 9 to 11. Now that I've been using 11 alpha, I find it very stable and usable, but have only 8 more days on the trial.

The usual links take me variously to a page for buying Version 11 for 35 dollars, or for upgrading to Ver. 9 (which I already have). Where is the page for upgrading at the special alpha price?
Logged
From the desk of: wonmug

LonWar

  • Citizen of the Universe
  • *****
  • Posts: 2874
Re:How to upgrade to Ver. 11?
« Reply #1 on: September 23, 2004, 07:36:17 am »

You should be able to goto Help, in MC
Then Buy MC

If this doesn't work, reinstall 9, restore the licence then install 11.
Logged
-

wonmug

  • Regular Member
  • Junior Woodchuck
  • **
  • Posts: 50
  • Don't worry, I'm always like this!
Re:How to upgrade to Ver. 11?
« Reply #2 on: September 23, 2004, 08:10:35 am »

You should be able to goto Help, in MC
Then Buy MC

If this doesn't work, reinstall 9, restore the licence then install 11.

As I wrote initially, Help | Buy Media Center is for purchasing anew at 35 dollars.

Ver. 9 is already installed and the license is valid.
Logged
From the desk of: wonmug

KingSparta

  • MC Beta Team
  • Citizen of the Universe
  • *****
  • Posts: 20063
Re:How to upgrade to Ver. 11?
« Reply #3 on: September 23, 2004, 11:02:50 am »

I don't think you can upgrade from 9 to 11

(I could be wrong)

I do think you can upgrade from 9 to 10 then from 10 to 11
Logged
Retired Military, Airborne, Air Assault, And Flight Wings.
Model Trains, Internet, Ham Radio, Music
https://MyAAGrapevines.com
https://centercitybbs.com
Fayetteville, NC, USA

JimH

  • Administrator
  • Citizen of the Universe
  • *****
  • Posts: 72438
  • Where did I put my teeth?
Re:How to upgrade to Ver. 11?
« Reply #4 on: September 23, 2004, 11:14:16 am »

You can upgrade from MC9 or MJ8.  Prices are in the first post here:

http://yabb.jriver.com/interact/index.php?board=3;action=display;threadid=23311
Logged

wonmug

  • Regular Member
  • Junior Woodchuck
  • **
  • Posts: 50
  • Don't worry, I'm always like this!
Re:How to upgrade to Ver. 11?
« Reply #5 on: September 23, 2004, 04:49:10 pm »

You can upgrade from MC9 or MJ8.  Prices are in the first post here:

http://yabb.jriver.com/interact/index.php?board=3;action=display;threadid=23311


I've read that, but my question is, HOW?
Logged
From the desk of: wonmug

JimH

  • Administrator
  • Citizen of the Universe
  • *****
  • Posts: 72438
  • Where did I put my teeth?
Re:How to upgrade to Ver. 11?
« Reply #6 on: September 23, 2004, 04:55:11 pm »

Install MC9, make sure it is licensed correctly.  Then install MC11 and purchase from the MC Help menu.
Logged

wonmug

  • Regular Member
  • Junior Woodchuck
  • **
  • Posts: 50
  • Don't worry, I'm always like this!
Re:How to upgrade to Ver. 11?
« Reply #7 on: September 23, 2004, 08:05:27 pm »

Install MC9, make sure it is licensed correctly.  Then install MC11 and purchase from the MC Help menu.

OK, I did exactly that. Purchase from the Help menu still takes me to a page for brand new purchase at 35 bucks. According to the Registration screen Ver. 9 is properly registered to me.

I have only one more week on the trial. Please fix this soon.
Logged
From the desk of: wonmug

JimH

  • Administrator
  • Citizen of the Universe
  • *****
  • Posts: 72438
  • Where did I put my teeth?
Re:How to upgrade to Ver. 11?
« Reply #8 on: September 23, 2004, 08:16:04 pm »

Can you copy your system info from MC Help and paste it here?
Logged

wonmug

  • Regular Member
  • Junior Woodchuck
  • **
  • Posts: 50
  • Don't worry, I'm always like this!
Re:How to upgrade to Ver. 11?
« Reply #9 on: September 23, 2004, 11:28:28 pm »

Can you copy your system info from MC Help and paste it here?


For Version 11:
Media Center 11.0.88 -- C:\Program Files\J River\Media Center 11\

Microsoft Windows XP  Workstation 5.1 Service Pack 2 (Build 2600)
Intel Pentium 4 2655 MHz MMX / Memory: Total - 1048 MB, Free - 524 MB

Internet Explorer: 6.0.2900.2180 / ComCtl32.dll: 5.82 (xpsp_sp2_rtm.040803-2158) / Shlwapi.dll: 6.00.2900.2180 (xpsp_sp2_rtm.040803-2158) / Shell32.dll: 6.00.2900.2180 (xpsp_sp2_rtm.040803-2158) / wnaspi32.dll: N/A
Ripping /   Drive G:   Mode:Normal  Type:Auto  Speed:Max
  Drive H:   Mode:Normal  Type:Auto  Speed:Max
  Drive Q:   Mode:Normal  Type:Auto  Speed:Max
  Drive R:   Mode:Normal  Type:Auto  Speed:Max
  Digital playback: Yes /  Use YADB: Yes /  Get cover art: No /  Calc replay gain: Yes /  Copy volume: 32767
  Eject after ripping: Yes /  Play sound after ripping: No  

Burning /  Drive G: LITE-ON  LTR-24102B         Addr: 1:0:0  Speed:24  MaxSpeed:24  BurnProof:Yes
  Test mode: No /  Eject after writing: Yes /  Direct decoding: Yes /  Write CD-Text: Yes
  Use playback settings: No /  Normalization: None

Version 9, meanwhile, won't boot properly now that I've installed Version 11. They are in separate folders. If necessary I'll reinstall 9 yet again, but isn't this a lot of loops to jump through just to upgrade?
Logged
From the desk of: wonmug

ama_mmmc

  • Regular Member
  • World Citizen
  • ***
  • Posts: 113
Re:How to upgrade to Ver. 11?
« Reply #10 on: September 24, 2004, 07:04:26 am »

I think he may have been looking for your ver. 9 info, to make sure there wasn't anything in their keeping you from upgrading.  The other thing is that you used to not have multiple versions on your machine, unless that changed, so if you have ver.9 in on location it probably won't run if ver11 is installed in another location.  I have not looked into that lately, but that use to be a common practice for JRiver.

Drew
Logged

wonmug

  • Regular Member
  • Junior Woodchuck
  • **
  • Posts: 50
  • Don't worry, I'm always like this!
Re:How to upgrade to Ver. 11?
« Reply #11 on: September 24, 2004, 07:55:24 pm »

I think he may have been looking for your ver. 9 info, to make sure there wasn't anything in their keeping you from upgrading.  The other thing is that you used to not have multiple versions on your machine, unless that changed, so if you have ver.9 in on location it probably won't run if ver11 is installed in another location.  I have not looked into that lately, but that use to be a common practice for JRiver.

Drew

I've uninstalled Ver. 11 and reinstalled Ver. 9. Here's the info now:

Media Center Registered 9.1.319 -- C:\Program Files\J River\Media Center\

Microsoft Windows XP  Workstation 5.1 Service Pack 2 (Build 2600)
Intel Pentium 4 2659 MHz MMX / Memory: Total - 1048 MB, Free - 440 MB

Internet Explorer: 6.0.2900.2180 / ComCtl32.dll: 5.82 (xpsp_sp2_rtm.040803-2158) / Shlwapi.dll: 6.00.2900.2180 (xpsp_sp2_rtm.040803-2158) / Shell32.dll: 6.00.2900.2180 (xpsp_sp2_rtm.040803-2158) / wnaspi32.dll: N/A
Ripping /   Drive G:   Copy mode:Normal   CD Type:Auto   Read speed:Max
  Drive H:   Copy mode:Normal   CD Type:Auto   Read speed:Max
  Drive Q:   Copy mode:Normal   CD Type:Auto   Read speed:Max
  Drive R:   Copy mode:Normal   CD Type:Auto   Read speed:Max
  Digital playback: Yes /  Use YADB: Yes /  Get cover art: No /  Calc replay gain: Yes /  Copy volume: 32767
  Eject after ripping: No /  Play sound after ripping: No  

Burning /  Drive G: LITE-ON  LTR-24102B         Addr: 1:0:0  Speed:24  MaxSpeed:24  BurnProof:Yes
  Test mode: No /  Eject after writing: Yes /  Direct decoding: Yes /  Write CD-Text: No
  Use playback settings: No /  Normalization: None
==============

Next I'll try intalling Ver. 11 over Ver. 9 and see if I can upgrade.
Logged
From the desk of: wonmug

wonmug

  • Regular Member
  • Junior Woodchuck
  • **
  • Posts: 50
  • Don't worry, I'm always like this!
Re:How to upgrade to Ver. 11?
« Reply #12 on: September 24, 2004, 08:07:45 pm »


Next I'll try intalling Ver. 11 over Ver. 9 and see if I can upgrade.

I just did that, but still get this page when I try to upgrade:

https://rover.jriver.com/cgi-bin/buy.cgi?productid=23

with this information:

Media Center 11
JRiver, Inc.
$35.00

So what gives??
Logged
From the desk of: wonmug

JimH

  • Administrator
  • Citizen of the Universe
  • *****
  • Posts: 72438
  • Where did I put my teeth?
Re:How to upgrade to Ver. 11?
« Reply #13 on: September 26, 2004, 08:32:13 am »

I wonder if you have one of the very early MC9 licenses that we had to replace.  We sent an e-mail to do this, but there were a few people who didn't respond.  That's the only possibility I can imagine.

Here's something you can try.  Just purchase the full MC11 license.  If that works, let me know by e-mail (with a link to this thread) and we'll credit your card for the difference.

I'm sorry you've had all the trouble.  It would be nice to be sure what it was.

Jim

jimh @ jriver.com
Logged

wonmug

  • Regular Member
  • Junior Woodchuck
  • **
  • Posts: 50
  • Don't worry, I'm always like this!
Re:How to upgrade to Ver. 11?
« Reply #14 on: September 26, 2004, 04:34:18 pm »

I wonder if you have one of the very early MC9 licenses that we had to replace.  We sent an e-mail to do this, but there were a few people who didn't respond.  That's the only possibility I can imagine.

Here's something you can try.  Just purchase the full MC11 license.  If that works, let me know by e-mail (with a link to this thread) and we'll credit your card for the difference.

I'm sorry you've had all the trouble.  It would be nice to be sure what it was.

Jim

jimh @ jriver.com


Thanks. I've now purchased and installed a license. Will be in touch!

Media Center Registered 11.0.90 -- C:\Program Files\J River\Media Center 11\

Microsoft Windows XP  Workstation 5.1 Service Pack 2 (Build 2600)
Intel Pentium 4 2655 MHz MMX / Memory: Total - 1048 MB, Free - 429 MB

Internet Explorer: 6.0.2900.2180 / ComCtl32.dll: 5.82 (xpsp_sp2_rtm.040803-2158) / Shlwapi.dll: 6.00.2900.2180 (xpsp_sp2_rtm.040803-2158) / Shell32.dll: 6.00.2900.2180 (xpsp_sp2_rtm.040803-2158) / wnaspi32.dll: N/A

(ETC.)
Logged
From the desk of: wonmug
Pages: [1]   Go Up