INTERACT FORUM

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: "Invalid address for write"  (Read 5126 times)

sparhawk

  • Regular Member
  • Recent member
  • *
  • Posts: 15
  • I might be a porcupine.
"Invalid address for write"
« on: November 06, 2005, 01:50:05 pm »
While trying to create several MP3 discs, MC10.0.173 keeps stopping, ejecting the disc, and the burn progress screen says "Invalid address for write."

The disc is then trash; it can't be read by anything.

What is going on here?
Logged

KingSparta

  • MC Beta Team
  • Citizen of the Universe
  • *****
  • Posts: 20048
Re: "Invalid address for write"
« Reply #1 on: November 06, 2005, 01:56:58 pm »
try it in test mode
Logged
Retired Military, Airborne, Air Assault, And Flight Wings.
Model Trains, Internet, Ham Radio
https://MyAAGrapevines.com
Fayetteville, NC, USA

sparhawk

  • Regular Member
  • Recent member
  • *
  • Posts: 15
  • I might be a porcupine.
Re: "Invalid address for write"
« Reply #2 on: November 06, 2005, 02:32:51 pm »
the test burns seem to work fine.
and the "invalid address for write" doesn't occur every time.
Logged

Keith Frank

  • Recent member
  • *
  • Posts: 16
Re: "Invalid address for write"
« Reply #3 on: November 26, 2005, 09:12:25 am »
I'm having the exact problem.  Test mode works fine.  I've got a playlist of ogg vorbis  tunes that I'm trying to convert to mp3s when I'm burning to disc. I was able to burn  a small section of the playlist to CD, but when I try burning the entire playlist(about 1 gig) to DVD the disc pops out and I get "Invalid address for write." Ny help would be appreciated.

Oh Yeah and I'm using MC 11.0.314
Logged

sparhawk

  • Regular Member
  • Recent member
  • *
  • Posts: 15
  • I might be a porcupine.
Re: "Invalid address for write"
« Reply #4 on: November 27, 2005, 05:33:53 pm »
I was using CompUSA generic discs.

When I switched to a Memorex brand package  of CDs, the problem didn't occur.
It appears that the CompUSA discs just had a lot of bad discs, and that the bad discs were causing the problem.
Logged

JimH

  • Administrator
  • Citizen of the Universe
  • *****
  • Posts: 71385
  • Where did I put my teeth?
Re: "Invalid address for write"
« Reply #5 on: November 27, 2005, 06:39:10 pm »
Thanks for reporting the solution.
Logged

Folbo

  • Regular Member
  • Recent member
  • *
  • Posts: 42
  • nothing more to say...
Re: "Invalid address for write"
« Reply #6 on: July 08, 2006, 04:16:10 pm »
Is this a solution ?

I am having this problem using Sony branded discs that have so far worked with data normal data every time.  This time I am wanting an ordinary audio CD for the car.

 ?
Logged

Folbo

  • Regular Member
  • Recent member
  • *
  • Posts: 42
  • nothing more to say...
Re: "Invalid address for write"
« Reply #7 on: July 08, 2006, 04:39:15 pm »
Nine drink mats later ... it seems to be happening at the same point each time, 6% into the burn, even if I swap the tracks about.
>:(

Any Suggestions?

(MC 11.1.188)
Logged

Mr ChriZ

  • Citizen of the Universe
  • *****
  • Posts: 4375
  • :-D
Re: "Invalid address for write"
« Reply #8 on: July 08, 2006, 05:10:49 pm »
Have you checked using other software recently? (Windows Built in Burning/Nero etc)
Tried different disks?
Logged

JohnT

  • Citizen of the Universe
  • *****
  • Posts: 4627
Re: "Invalid address for write"
« Reply #9 on: July 10, 2006, 10:38:02 am »
Please post your system info (from MC's Help menu). Sounds like buffer overrun. If you have an old burner without burn-proof you could drop the burning speed (try 4X).
Logged
John Thompson, JRiver Media Center

Folbo

  • Regular Member
  • Recent member
  • *
  • Posts: 42
  • nothing more to say...
Re: "Invalid address for write"
« Reply #10 on: July 10, 2006, 02:51:54 pm »
Here are the system settings:

Media Center Registered 11.1.188 -- C:\Program Files\J River\Media Center 11\

Microsoft Windows XP  Workstation 5.1 Service Pack 2 (Build 2600)
AMD Athlon 1666 MHz MMX / Memory: Total - 2097 MB, Free - 1635 MB

Internet Explorer: 6.0.2900.2180 / ComCtl32.dll: 5.82.2900 / Shlwapi.dll: 6.0.2900 / Shell32.dll: 6.0.2900 / wnaspi32.dll: N/A
Ripping /   Drive W:   Mode:Normal  Type:Auto  Speed:Max
  Drive X: _NEC    DVD_RW ND-3500AG  Mode:Normal  Type:Auto  Speed:Max
  Drive Y: _NEC    DVD_RW ND-3500AG  Mode:Normal  Type:Auto  Speed:Max
  Digital playback: Yes /  Use YADB: No /  Get cover art: Yes /  Calc replay gain: Yes /  Copy volume: 32767
  Eject after ripping: Yes /  Play sound after ripping: No 

Burning /  Drive Y: _NEC     DVD_RW ND-3500AG   Addr: 4:0:0  Speed:48  MaxSpeed:48  BurnProof:Yes
  Test mode: No /  Eject after writing: Yes /  Direct decoding: Yes /  Write CD-Text: Yes
  Use playback settings: No /

I will play with other burning software in a while.
Logged

Folbo

  • Regular Member
  • Recent member
  • *
  • Posts: 42
  • nothing more to say...
Re: "Invalid address for write"
« Reply #11 on: July 10, 2006, 04:40:02 pm »
I have now burned successfully  ;D

but not with MC  :'(

The original files were stored as APE.
I converted these to MP3 (no errors reported) and then used Roxio Classic to make an Audio CD ... which it did first time with no errors.

Logged

Folbo

  • Regular Member
  • Recent member
  • *
  • Posts: 42
  • nothing more to say...
Re: "Invalid address for write"
« Reply #12 on: July 10, 2006, 04:51:24 pm »
BTW. I was just looking at the system info post ...

It seems to be reporting that I have two CD drives, X and Y, both NEC units.

I actually have only one physical unit, the Y drive (which is identified by MC as the burner).

I do have two logical drives (using Alchohol 120), these are W: and X: (although W: is currently empty).
The reported hardware properties of these drives are that they are both LU8555M OEX199A SCSI CdRom devices.

Is it a coincidence that MC seems to be reporting the X: drive incorrectly? and missing the W: drive completely?

I have just mounted an image into W: and that seems to be working fine, except having restarted MC the system info does not seem to have changed at least with respect to W:. (Neither image contains any media files in the root).

Media Center Registered 11.1.188 -- C:\Program Files\J River\Media Center 11\

Microsoft Windows XP 5.1 Service Pack 2 (Build 2600)
AMD Athlon 1666 MHz MMX / Memory: Total - 2097 MB, Free - 1677 MB

Internet Explorer: 6.0.2900.2180 / ComCtl32.dll: 5.82.2900 / Shlwapi.dll: 6.0.2900 / Shell32.dll: 6.0.2900 / wnaspi32.dll: N/A
Ripping /   Drive W:   Mode:Normal  Type:Auto  Speed:Max
  Drive X: _NEC    DVD_RW ND-3500AG  Mode:Normal  Type:Auto  Speed:Max
  Drive Y: _NEC    DVD_RW ND-3500AG  Mode:Normal  Type:Auto  Speed:Max
  Digital playback: Yes /  Use YADB: No /  Get cover art: Yes /  Calc replay gain: Yes /  Copy volume: 32767
  Eject after ripping: Yes /  Play sound after ripping: No 

Burning /  Drive Y: _NEC     DVD_RW ND-3500AG   Addr: 4:0:0  Speed:32  MaxSpeed:32  BurnProof:Yes
  Test mode: No /  Eject after writing: Yes /  Direct decoding: Yes /  Write CD-Text: Yes
  Use playback settings: No /






Logged

JohnT

  • Citizen of the Universe
  • *****
  • Posts: 4627
Re: "Invalid address for write"
« Reply #13 on: July 10, 2006, 04:55:50 pm »
Sounds like there could be a connection between the burn error and mis-reading the Alcohol drives. Any chance you could test this by disabling Alcohol temporarily and trying a burn (and pasting the system info)?
Logged
John Thompson, JRiver Media Center

Folbo

  • Regular Member
  • Recent member
  • *
  • Posts: 42
  • nothing more to say...
Re: "Invalid address for write"
« Reply #14 on: July 11, 2006, 03:07:05 pm »
Alcohol is now diabled with no vitual drives.

The system info now looks like this:
Media Center Registered 11.1.188 -- C:\Program Files\J River\Media Center 11\

Microsoft Windows XP  Workstation 5.1 Service Pack 2 (Build 2600)
AMD Athlon 1659 MHz MMX / Memory: Total - 2097 MB, Free - 1740 MB

Internet Explorer: 6.0.2900.2180 / ComCtl32.dll: 5.82.2900 / Shlwapi.dll: 6.0.2900 / Shell32.dll: 6.0.2900 / wnaspi32.dll: N/A
Ripping /   Drive Y: _NEC    DVD_RW ND-3500AG  Mode:Normal  Type:Auto  Speed:Max
  Digital playback: Yes /  Use YADB: No /  Get cover art: Yes /  Calc replay gain: Yes /  Copy volume: 32767
  Eject after ripping: Yes /  Play sound after ripping: No 

Burning /  Drive Y: _NEC     DVD_RW ND-3500AG   Addr: 1:0:0  Speed:48  MaxSpeed:48  BurnProof:Yes
  Test mode: No /  Eject after writing: Yes /  Direct decoding: Yes /  Write CD-Text: Yes
  Use playback settings: No /


No mention any drives but the actual physical drive.

Unfortuantely my drink mat collection is now +1  :(

Incidently, any idea why my clock speed is being reported as slightly different? (I'm ignoring the fact that my 3gb of RAM sgows up as 2gb. Many apps do this as well).
Logged

JohnT

  • Citizen of the Universe
  • *****
  • Posts: 4627
Re: "Invalid address for write"
« Reply #15 on: July 11, 2006, 03:14:58 pm »
Hmmm...
To avoid creating coasters, enable "test mode".
Turn on the burn logging function by going into "Help/Configure debug logging", check the CD event and make sure "Output to a log file" is checked.
Try disabling the "direct decoding" and "write cd-text" options and do a test-mode burn with the burn speed set to 8X.
When a burn error occurs, go back to "configure debug logging" and click "view current log file". Save a file, zip it and send to:
johnt @ jriver.com
Logged
John Thompson, JRiver Media Center
Pages: [1]   Go Up
« previous next »