Topic: Tv Tuner picture But no Sound (Read 49016 times)

G-UNIT · « **on:** July 29, 2006, 07:12:47 pm »

Hi I have an ATI All in Wonder128 PRO .OS: XP Home ED SP2....MC 11.1.81

On the TV tune on MC I ge the picture but no sound Icant figure out whats goin on? I new to MC.... Can any one help me?
thanks

Yaobing · « **Reply #1 on:** July 30, 2006, 08:22:23 am »

Did you connect audio from the TV card to the sound card using a cable? I believe your AIW128 PRO requires such a connection.

1. Connect the cable.

2. Go to MC TV Options. On Audio tab, make sure "This device requires a cable to route sound directly to the sound card" checkbox is checked, and make sure correct sound card and audio line are chosen.

3. On TV Options, go to Advanced Properties. Double click one of the items that has the word "Crossbar" in it (you may have two such items, try both). On the Output panel choose "Audio Decoder Out". On the Input panel choose "Audio Tuner In". Click OK.

G-UNIT · « **Reply #2 on:** July 30, 2006, 07:21:12 pm »

I tried that but didn't solve the problem....by the way The sound card that I have is an "SB Audigy Audio [A800]" I my sound cables that come off the sound card have to be pluged directly into the mother board..but I do have a an port for the wire tthat come off the sound card internally that can be connect some place else? I have no idea what I am really doing sorry..thanks for the help

Yaobing · « **Reply #3 on:** July 31, 2006, 08:24:11 am »

On the back of your sound card there should be a "Line In" connection (usually in blue color?). That is where you should connect the "Audio out" from your TV card. "Line In" is designed to take external sound, it therefore should not be connected to the motherboard. Are you saying you do not have a "Line in" connection?

For ATI AIW 128PRO, you can also use internal cable, if your sound card has it.

In my previous post

Quote

2. Go to MC TV Options. On Audio tab, make sure "This device requires a cable to route sound directly to the sound card" checkbox is checked, and make sure correct sound card and audio line are chosen.

"correct ... audio line ..." is meant for you to tell the program which line you have connected - the external "Line in" or the internal "Auxiliary".

shAf · « **Reply #4 on:** August 06, 2006, 07:22:33 am »

I too am having this problem ... i.e., no sound from my TV tuner ?

(1) But I do get sound from MC11.1(191) when I play MP3s

(2) ... and I do get sound from ATI's own TV software

(3) ... and I have tried Yaobing's suggestions in the 2nd post (... although I didn't see the same thing described in advanced & "crossbar" ... please clarify)

Also of note ... I did get sound at one time from MC's TV tuner, but it's now silent. I did find the set to defaults button which didn't work either.

I'm stumped ....

... please advise

TIA

ATI AIW 9700 Pro
Media Center Registered 11.1.191 -- C:\Program Files\J River\Media Center 11\

Microsoft Windows XP Workstation 5.1 Service Pack 2 (Build 2600)
Intel Pentium 4 2367 MHz MMX / Memory: Total - 523 MB, Free - 209 MB

Internet Explorer: 6.0.2900.2180 / ComCtl32.dll: 5.82.2900 / Shlwapi.dll: 6.0.2900 / Shell32.dll: 6.0.2900 / wnaspi32.dll: N/A
Ripping / Drive E: Mode:Normal Type:Auto Speed:Max
Digital playback: Yes / Use YADB: Yes / Get cover art: No / Calc replay gain: Yes / Copy volume: 32767
Eject after ripping: Yes / Play sound after ripping: No

Burning / Drive E: PLEXTOR DVDR PX-708A Addr: 1:1:0 Speed:40 MaxSpeed:40 BurnProof:Yes
Test mode: No / Eject after writing: Yes / Direct decoding: Yes / Write CD-Text: Yes
Use playback settings: No /

Yaobing · « **Reply #5 on:** August 06, 2006, 10:17:14 am »

Quote from: shAf on August 06, 2006, 07:22:33 am

(3) ... and I have tried Yaobing's suggestions in the 2nd post (... although I didn't see the same thing described in advanced & "crossbar" ... please clarify)

While in TV View, click Options button to bring up the TV Options dialog. Click "Advanced Properties" tab. You should see a list from which you may find "Video Crossbar..." and possibly "Second Crossbar...". Double click "Video Crossbar..." to bring out the property page. From the dropdown list on the right (Output) select "Audio Decoder out", then from the dropdown list on the left (Input) select "Audio Line In".

Additionally try this:

While TV is playing, right-click the video window to bring up the context menu. choose "TV Options"\"Devices". It lists all your TV devices followed by audio devices. Two items should have check marks, one for your TV tuner device, one for your corresponding sound card. Make sure correct sound card is checked. Even if it has a check mark, select it again.

shAf · « **Reply #6 on:** September 16, 2006, 01:45:20 pm »

Yaobing ... thanx for these suggestions, and I apologize for taking so long to get back to this problem ... but I tried these and still no sound.

Yet, my ATI TV software still works normally (except that wont move it's display to my HDTV as 2nd monitor, as well as creating proprietary files). Additionally, MC11.1.196 MP3 playback is normal, and for both TV and MP3, I can see proper "line/Mic Input Levels" with the Revo software. It's frustrating ... it should be working!!

Any other suggestions, or information I may be able to provide?

TIA

rjm · « **Reply #7 on:** November 08, 2006, 03:32:04 pm »

Try changing channels.

When starting TV in MC12 I get no sound until I change the channel. Thereafter works fine.

pgrisham · « **Reply #8 on:** May 15, 2007, 06:53:32 pm »

I too have no sound in TV with an ATI video card. I have latest version of MC (12.0.226), and sound works for every other situation in MC--mp3s, videos on HD, etc. I have a USB wonder. It works fine in the ATI software.

No one seemed to solve the problem as of yet, so I am curious as to possible solutions...

thenoob1 · « **Reply #9 on:** May 15, 2007, 11:44:52 pm »

Yeah me too... I've a Hauppauge Hvr 1300 and since 12.0.226 there is no sound in TV-mode.

tn1

Yaobing · « **Reply #10 on:** May 17, 2007, 01:00:29 pm »

Quote from: pgrisham on May 15, 2007, 06:53:32 pm

I too have no sound in TV with an ATI video card. I have latest version of MC (12.0.226), and sound works for every other situation in MC--mp3s, videos on HD, etc. I have a USB wonder. It works fine in the ATI software.

No one seemed to solve the problem as of yet, so I am curious as to possible solutions...

1. Options -> Audio tab. Uncheck "This device requires a physical cable to route sound directly to sound card".

2. While TV is playing, right-click and choose TV Options -> Devices and select a audio device from the bottom portion of the list. You may need to experiment with different ones if you have more than one. In particular, if you see an "ATI" device, try it.

Yaobing · « **Reply #11 on:** May 17, 2007, 01:10:25 pm »

Quote from: thenoob1 on May 15, 2007, 11:44:52 pm

Yeah me too... I've a Hauppauge Hvr 1300 and since 12.0.226 there is no sound in TV-mode.

tn1

Have you tried doing a Reset on TV? Please email me a log file if you can not get it to work. yaobing at jriver dot com

matshif · « **Reply #12 on:** May 17, 2007, 01:45:35 pm »

Hi Yaobing,
I have a Win TV HVR-900.
Bad sound in 120219 and 120222.
No sound in 120226 and 120233.

I have mailed a loggfile fom 120233.
Media Center Registered 12.0.233 -- C:\Program Files\J River\Media Center 12\

Microsoft Windows XP Workstation 5.1 Service Pack 2 (Build 2600)
AMD Unknown 797 MHz MMX / Memory: Total - 1964 MB, Free - 1433 MB

Internet Explorer: 7.0.5730.11 / ComCtl32.dll: 5.82.2900 / Shlwapi.dll: 6.0.2900 / Shell32.dll: 6.0.2900 / wnaspi32.dll: 4.71 (0001) , ASPI for Win32 (95/NT) DLL, Copyright © 1989-2002 Adaptec, Inc. / Aspi32.sys: 4.71 (0001)

Ripping / Drive D: Optiarc DVD RW AD-7540A Mode:Normal Type:Auto Speed:Max
Digital playback: Yes / Use YADB: Yes / Get cover art: No / Calc replay gain: Yes / Copy volume: 32767
Eject after ripping: Yes / Play sound after ripping: No

Burning / Drive D: Optiarc DVD RW AD-7540A Addr: 3:0:0 Speed:24 MaxSpeed:24 BurnProof:Yes
Test mode: No / Eject after writing: Yes / Direct decoding: Yes / Write CD-Text: Yes
Use playback settings: No /

Portable Device Info
Removed devices:

Interface Plugins:
Library Server (Active)
TiVo Server (Active)
UPnP Server (Active)

/Mats

thenoob1 · « **Reply #13 on:** May 17, 2007, 02:10:02 pm »

No, it doesn't work... I've sent you a logfile.
Thx
Tn1

I've a Hvr 1300 and since 226 no sound at all like matshif

Yaobing · « **Reply #14 on:** May 18, 2007, 07:27:48 am »

I have fixed a bug. This should bring back the sound.

Quote from: matshif on May 17, 2007, 01:45:35 pm

I have a Win TV HVR-900.
Bad sound in 120219 and 120222.

Can you describe the "bad sound" a bit more? What kind of problems do you experience?

Have you tried selecting a different audio renderer?

If not please try doing that. Audio renderer selection is outside of TV Options. It is global to all Media Center DirectShow playback, and is found here:

Tools -> Options -> Playback -> DirectShow playback settings ...

The setting is Zone-specific. So you must switch to the zone that you play TV in before going to the option window.

matshif · « **Reply #15 on:** May 18, 2007, 08:42:22 am »

Quote from: Yaobing on May 18, 2007, 07:27:48 am

I have fixed a bug. This should bring back the sound.

Can you describe the "bad sound" a bit more? What kind of problems do you experience?

Have you tried selecting a different audio renderer?

If not please try doing that. Audio renderer selection is outside of TV Options. It is global to all Media Center DirectShow playback, and is found here:

Tools -> Options -> Playback -> DirectShow playback settings ...

The setting is Zone-specific. So you must switch to the zone that you play TV in before going to the option window.

The sound is kind of hacking forward.

I have tried the five Audio renders that I have.

Four gives the sound above. The 5th crash MC; Failed to play TV that is.

I have no sound problem with Hauppauge Win2000.

/Mats

Yaobing · « **Reply #16 on:** May 18, 2007, 09:30:28 am »

Quote from: matshif on May 18, 2007, 08:42:22 am

The sound is kind of hacking forward.

I have tried the five Audio renders that I have.

Four gives the sound above. The 5th crash MC; Failed to play TV that is.

I have no sound problem with Hauppage Win2000.

/Mats

You are using "Realtek HD Audio input" as your audio capture device. Do you have other devices to choose from? Use Right-Click menu, TV Options -> Devices.

Send me another log file please.

matshif · « **Reply #17 on:** May 18, 2007, 10:36:08 am »

I have two and both are chosen. I can't choose only one of them??

I have also WinTV HVR-900 Capture.

I send a log file.

/Mats

Yaobing · « **Reply #18 on:** May 18, 2007, 11:25:22 am »

Quote from: matshif on May 18, 2007, 10:36:08 am

I have two and both are chosen. I can't choose only one of them??

I have also WinTV HVR-900 Capture.

I send a log file.

/Mats

That menu lists both video and audio devices. Two check marks are there, one for video and one for audio.

Also, I just read your log file. The audio is rendered from the video capture device, not from the audio capture device. That make selection of audio capture device irrelevant.

Yaobing · « **Reply #19 on:** May 18, 2007, 11:49:06 am »

Your device outputs audio from video capture filter. The audio is rendered correctly and outputs audio at 2 channel, 16 bit 48000 samples per sec PCM. So, it should work.

Try these things:

TV Options -> Audio tab. Make sure "Enable Audio Mode Selection (Analog TV Only)" is checked, and "Stereo" is chosen.

TV Options -> Advanced Properties tab. Double click an entry in the list to enter its property pages. Look for anything that is related to audio. For example double click "Video Capture Filter...". It may contain configuration for audio output.

thenoob1 · « **Reply #20 on:** May 18, 2007, 01:56:54 pm »

YAOBING thx it works right now. Must I keep the file you sent me or is it included in the next build?
Thanks a lot for your quickly help.
tn1

Yaobing · « **Reply #21 on:** May 18, 2007, 02:34:50 pm »

It will be included in the next build. You do not need to save it.

matshif · « **Reply #22 on:** May 18, 2007, 03:57:31 pm »

I have tried a lot of different settings, but still no luck.

No it's time for bed, but I'll be back.

Thx for Your assistance Yaobing and a great product.

The above problems I have on my laptop. The other pc is OK.

/Mats

Tangoman · « **Reply #23 on:** May 19, 2007, 01:49:59 pm »

Hi Yaobing,

This is an issue on my laptop too. No sound for the past several versions. I can't remember which was the last working version but over 2 months ago. I have tried all the above suggestions with no success.
I notice that on the volume control when set to internal it goes to mute when the picture starts in TV mode. The BDA drivers for my tuner have recently been upgraded to WHQL I have installed them but it doesn't help. I will post a log file to you.

Thankyou Tangodude
Media Center Registered 12.0.233 -- C:\Program Files\J River\Media Center 12\

Microsoft Windows XP Workstation 5.1 Service Pack 2 (Build 2600)
Intel Pentium M 1131 MHz MMX / Memory: Total - 2096 MB, Free - 1404 MB

Internet Explorer: 6.0.2900.2180 / ComCtl32.dll: 5.82.2900 / Shlwapi.dll: 6.0.2900 / Shell32.dll: 6.0.2900 / wnaspi32.dll: N/A
Ripping / Drive Y: Mode:Normal Type:Auto Speed:Max
Digital playback: Yes / Use YADB: Yes / Get cover art: No / Calc replay gain: Yes / Copy volume: 32767
Eject after ripping: Yes / Play sound after ripping: No

Burning / Drive Y: _NEC DVD+-RW ND-6650A Addr: 1:0:0 Speed:10 MaxSpeed:24 BurnProof:Yes
Test mode: No / Eject after writing: Yes / Direct decoding: Yes / Write CD-Text: Yes
Use playback settings: No /

Interface Plugins:
Library Server (Active)
TiVo Server (Active)
UPnP Server (Active)

matshif · « **Reply #24 on:** May 21, 2007, 10:56:09 am »

Quote from: matshif on May 18, 2007, 03:57:31 pm

I have tried a lot of different settings, but still no luck.

No it's time for bed, but I'll be back.

Thx for Your assistance Yaobing and a great product.

The above problems I have on my laptop. The other pc is OK.

/Mats

Hi Yaobing

I have now checked Adv Properties under Tv Option.

I find:
Audio Capture Filter...
Video Capture Filter...
Video Crossbar...
TV Turner...
TV Audio...
Deinterlacing...

In Video Capture Filter... I find a tab Video Image with TV Audio, mono checked and Audio Path with USB Path checked.

I can't change anything. Everything is grey.

The sound is still as hacking as before.

/Mats

Yaobing · « **Reply #25 on:** May 21, 2007, 01:43:14 pm »

Quote from: matshif on May 21, 2007, 10:56:09 am

Hi Yaobing

I have now checked Adv Properties under Tv Option.

I find:
Audio Capture Filter...
Video Capture Filter...
Video Crossbar...
TV Turner...
TV Audio...
Deinterlacing...

In Video Capture Filter... I find a tab Video Image with TV Audio, mono checked and Audio Path with USB Path checked.

I can't change anything. Everything is grey.

The sound is still as hacking as before.

/Mats

Make sure you are actually watching a TV channel when you do that. Some times the options are not available (greyed out) when you are not actually watching a channel.

Yaobing · « **Reply #26 on:** May 21, 2007, 02:25:29 pm »

Quote from: Tangodude on May 19, 2007, 01:49:59 pm

Hi Yaobing,

This is an issue on my laptop too. No sound for the past several versions. I can't remember which was the last working version but over 2 months ago. I have tried all the above suggestions with no success.
I notice that on the volume control when set to internal it goes to mute when the picture starts in TV mode. The BDA drivers for my tuner have recently been upgraded to WHQL I have installed them but it doesn't help. I will post a log file to you.

Thankyou Tangodude

Tangodude:

Your log file did not contain any TV related data. Please try emailing another one. Make sure you turn on "TV" logging. Also make sure you mail the log file right after running TV (just go to Help -> Logging..., and click "Click to email log files" link). If you close MC and then restart MC, the log info is copied to "Previous Log.txt" (and not in "Log.txt").

The volume control's behaviour is expected. TV currently does not support Internal Volume. It will in the future.

matshif · « **Reply #27 on:** May 21, 2007, 02:33:04 pm »

Log file mailed.
Sorry. I saw that it wasn't that should mail a log file.

I was looking att TV when I made my checking.
/Mats

Yaobing · « **Reply #28 on:** May 21, 2007, 03:38:40 pm »

Quote from: matshif on May 21, 2007, 02:33:04 pm

Log file mailed.
Sorry. I saw that it wasn't that should mail a log file.

I was looking att TV when I made my checking.
/Mats

Your log files do contain TV logging info

Still, I not tell from the logs what is wrong. The only thing that is suspicious is that the logs show your device only has mono audio available, no stereo. If your device should have stereo sound, then maybe you need to update your device driver.

Tangoman · « **Reply #29 on:** May 21, 2007, 06:35:41 pm »

Hi Yaobing,
Ok sent new log file with TV info this time
Sorry for the last bloob
Tangodude

Yaobing · « **Reply #30 on:** May 22, 2007, 08:07:35 am »

Quote from: Tangodude on May 21, 2007, 06:35:41 pm

Hi Yaobing,
Ok sent new log file with TV info this time
Sorry for the last bloob
Tangodude

Thanks. This time we get something.

On initial look, it seems to be an audio capture device selection problem. Please try this:

While a TV channel is playing, right-click in the video window and click "TV Options" -> "Devices". Do you see two "USB 2881 Device" listed? The first one should be your video capture device which you already selected (has a check mark next to it). Also you selected "SigmaTel C-Major Audio" for audio capture device. Try selecting the second "USB 2881 Device" for audio capture device.

It is unfortunate that they named both audio capture filter and video capture filter identically. If you do not see two "USB 2881 Device" listed, I need to do some fixing.

matshif · « **Reply #31 on:** May 22, 2007, 03:37:55 pm »

Quote from: Yaobing on May 21, 2007, 03:38:40 pm

Your log files do contain TV logging info

Still, I not tell from the logs what is wrong. The only thing that is suspicious is that the logs show your device only has mono audio available, no stereo. If your device should have stereo sound, then maybe you need to update your device driver.

I have updated my device driver to Realtek 1.67.

Sent a log file.

Haven't tried version 120239 yet. Be back.

/Mats

matshif · « **Reply #32 on:** May 22, 2007, 03:45:03 pm »

Hi Yaobing,

I have new (last drivers, I hope to Realtek ver 1.67) and MC 12039. Still the bad sound.

Sent a log file.

/Mats

Yaobing · « **Reply #33 on:** May 22, 2007, 05:36:16 pm »

Quote from: matshif on May 22, 2007, 03:45:03 pm

Hi Yaobing,

I have new (last drivers, I hope to Realtek ver 1.67) and MC 12039. Still the bad sound.

Sent a log file.

/Mats

Sorry, I meant TV capture card driver, not sound card driver.

matshif · « **Reply #34 on:** May 23, 2007, 09:56:01 am »

Quote from: Yaobing on May 22, 2007, 05:36:16 pm

Sorry, I meant TV capture card driver, not sound card driver.

OK, I'll give it a try.

/Mats

Tangoman · « **Reply #35 on:** May 23, 2007, 01:05:17 pm »

Hi Yaobing,
I have tried your suggestion, unfortunately it stops the TV from working at all. I have to reset TV settings through TOOLS>OPTIONS>...
I have sent a new log file in the hope that it helps.
Many thanks
Tangodude

Yaobing · « **Reply #36 on:** May 23, 2007, 02:20:22 pm »

Quote from: Tangodude on May 23, 2007, 01:05:17 pm

Hi Yaobing,
I have tried your suggestion, unfortunately it stops the TV from working at all. I have to reset TV settings through TOOLS>OPTIONS>...
I have sent a new log file in the hope that it helps.
Many thanks
Tangodude

I guess it was a bad suggestion. Selecting that audio device caused some serious problem.

Does your device require you to plug a cable from the TV card to your sound card?

Tangoman · « **Reply #37 on:** May 23, 2007, 02:52:48 pm »

Hi Yaobing
This device does not require a cable to get sound, all comes in through the USB port. It has worked with MC albeit with sync issue.
Cheers
Tangodude

matshif · « **Reply #38 on:** May 23, 2007, 04:05:28 pm »

Quote from: Yaobing on May 22, 2007, 05:36:16 pm

Sorry, I meant TV capture card driver, not sound card driver.

OK Yaobing,

Never mind I got at least new drivers to my sound card which solved a minor problem with my headphones.

I have Win XP Media Center 2005 Edition and find two drivers on Hauppage Support.

I don't use Win Media Center.

Could You give me an advice which to use, please.

One is called "Support for Windows XP/Vista Media Center Edition" and the other one "Support for Windows XP/Vista using WinTV".

You find information here http://www.hauppauge.co.uk/pages/support.html

/Mats

Yaobing · « **Reply #39 on:** May 23, 2007, 05:43:15 pm »

Quote from: matshif on May 23, 2007, 04:05:28 pm

OK Yaobing,

Never mind I got at least new drivers to my sound card which solved a minor problem with my headphones.

I have Win XP Media Center 2005 Edition and find two drivers on Hauppage Support.

I don't use Win Media Center.

Could You give me an advice which to use, please.

One is called "Support for Windows XP/Vista Media Center Edition" and the other one "Support for Windows XP/Vista using WinTV".

You find information here http://www.hauppauge.co.uk/pages/support.html

/Mats

Sorry, I can not give you any advice on that as I do not understand the difference myself. Maybe you can contact Hauppauge.

Anyone else have any ideas?

Yaobing · « **Reply #40 on:** May 23, 2007, 05:50:56 pm »

Quote from: Tangodude on May 23, 2007, 01:05:17 pm

Hi Yaobing,
I have tried your suggestion, unfortunately it stops the TV from working at all. I have to reset TV settings through TOOLS>OPTIONS>...
I have sent a new log file in the hope that it helps.
Many thanks
Tangodude

I still do not understand why selecting "USB 2881 Device" for audio capture device would cause problems. If your device does not require you to plug an audio cable from the TV device to your sound card, then selecting "USB 2881 Device" is the only way to get sound as your video capture filter does not have any audio output.

Maybe there is something wrong with your latest installation of drivers. Could try rolling back the drivers or at least try reinstalling them?

Tangoman · « **Reply #41 on:** June 05, 2007, 06:19:36 pm »

Hi Yaobing,
I hope you still get some fun time while working on MC TV issues. Finally I got some time to do some more checking. I have posted a couple of logs to you. I installed an old Hard Drive back in the laptop and had TV with sound working in MC though it has a sound delay, the second log is with the latest BDA drivers and latest MC version. The third is my normall XP system drive with the latest BDA drivers as suggested on the MC forum. I noticed there is a different name for the audio device on the older system. Maybe the comparison can point to a clue.
Thanks for the help.
Cheers Tangodude

Pendragon737 · « **Reply #42 on:** January 19, 2008, 02:49:46 am »

I was having same issues as the original post no sound but video for tv. I have a ati tv wonder pro card and sound is linked to my sound blaster audigy card. after messing around with it I found that under tv device/options/advanced tab if I double clicked tv audio and clicked some of the mono/ stereo or language options I had sound. I will note that this did occur after I had already tried the video crosshair change to audio suggestion which did not give me sound. I don't know if it was a combination of changing the crosshair option and the tv audio or just the tv audio option. I hope that this will help someone else resolve this issue in the future.

oblada · « **Reply #43 on:** July 24, 2008, 10:19:03 pm »

I have a Sony VGC-RB34G with an ATI encoder board and Real Tek as my audio...I have no sound in TV all other sounds work within Media Center. Any help would be apprciated. I have done a clean install with the same results

Yaobing · « **Reply #44 on:** July 29, 2008, 11:12:52 am »

Quote from: oblada on July 24, 2008, 10:19:03 pm

I have a Sony VGC-RB34G with an ATI encoder board and Real Tek as my audio...I have no sound in TV all other sounds work within Media Center. Any help would be apprciated. I have done a clean install with the same results

Sony device could be troublesome as they may not conform to Microsoft specifications. Is this an analog or digital TV device?

You can email me a log file. yaobing at jriver dot com

Ants · « **Reply #45 on:** January 08, 2009, 12:10:12 am »

Hi all,

I'm a new user running the trial version. I like what I see, and find it all fairly intuitive - which is the mark of good software!

However, I too have no sound from the TV tuner card - except when I use it in PVR live-pause mode! So if I'm content to watch a program 10 seconds delayed my sound works fine. I've added the audio link cable and fiddled with the settings ad infinitum, yet the only sound is when I am in live-pause playback. I am not using the analogue antenna input yet - only AV from my dish receiver/decoder.

TV card = LEADTEK TV2000XP
Audio card = AOpen AW870LP
OS = Win XP

Any clues what to try next?

Also - How do I set my TV tuner card to "radio tuner mode" from MediaCentre?

Yaobing · « **Reply #46 on:** January 08, 2009, 10:35:32 am »

Quote from: Ants on January 08, 2009, 12:10:12 am

Hi all,

I'm a new user running the trial version. I like what I see, and find it all fairly intuitive - which is the mark of good software!

However, I too have no sound from the TV tuner card - except when I use it in PVR live-pause mode! So if I'm content to watch a program 10 seconds delayed my sound works fine. I've added the audio link cable and fiddled with the settings ad infinitum, yet the only sound is when I am in live-pause playback. I am not using the analogue antenna input yet - only AV from my dish receiver/decoder.

TV card = LEADTEK TV2000XP
Audio card = AOpen AW870LP
OS = Win XP

Any clues what to try next?

Does this device require a cable connecting it to sound card?

If yes, you must check "This device requires a..." checkbox on Audio tab, and select the sound card and input line from the drop-down lists.

If no, you must uncheck that checkbox.

If the checkbox is checked, and correct device and line are selected, and you still get sound, try right-click in video window and find TV Options -> Devices submenu. The submenu lists TV tuner devices followed by audio capture devices. Experiment with choosing a different audio device.

Quote

Also - How do I set my TV tuner card to "radio tuner mode" from MediaCentre?

Radio tuner is not supported.

Ants · « **Reply #47 on:** January 09, 2009, 11:27:42 pm »

Hi, and thanks, but no go.

I have tried plugging the audio link into every socket, and setting every single driver, and link, and crossbar, etc., there is. I have reinstalled updated drivers for both sound card and TV card - still NO sound while watching TV.

Now a new problem, which may be related - if I record TV I do get sound in the recording (as I mentioned in my first post), BUT the sound lags behind the picture by as much as 10secs! Now what?

INTERACT FORUM

Author Topic: Tv Tuner picture But no Sound (Read 49016 times)