INTERACT FORUM

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: [Resolved] JRSS, ConvolverVST, Audiolense XO  (Read 5379 times)

hulkss

  • Galactic Citizen
  • ****
  • Posts: 451
[Resolved] JRSS, ConvolverVST, Audiolense XO
« on: December 12, 2011, 01:11:02 am »

I have my new HTPC & related hardware up and running now. I have set Media Center to upscale all audio to 7.1 (8 channels).

I have a sound system that is 16 channels: LCR tri-amped (9 channels); 2 sides, 2 back, 3 subs total = 16.

Using Audiolense software, I have a filter set constructed for ConvolverVST that is designed to input 7.1 (8 channels) and output the 16 channels I need.

The problem is when Media Center is set to upscale to 7.1 it does not properly manage the 16 channels coming out of ConvolverVST. I only get 8 channels of output. If I set Media Center to 16 channels, I can not select 7.1 upscaling.

Plea: Maybe this situation could be accommodated by the JRiver experts?

If needed:
I have seen comments about setting up a host for ConvolverVST that Media Center would output to. Then output from the ConvolverVST host to my USB 16 channel DAC. Any help on this would be appreciated.

I have seen references to:
Virtual Audio Cable: http://software.muzychenko.net/eng/vac.htm#features
ASIO4ALL: http://www.asio4all.com/
Bidule: http://www.plogue.com/?page_id=56
SAVIHost: http://www.hermannseib.com/english/savihost.htm
Console: http://console.jp/en/about/about_1.html
Jack: http://jackaudio.org/jack_on_windows
AudioMulch: http://www.audiomulch.com/
Logged

BradC

  • World Citizen
  • ***
  • Posts: 207
Re: Help Needed DSP Settings and ConvolverVST Plugin
« Reply #1 on: December 12, 2011, 05:00:33 pm »

hi

I use plogue bidule as a vst plugin inside MC.

I don't think this would help you however, as you still need to set MC to 16 channels. You would need a VST plugin to do the 7.1 conversion within bidule.

I think the best bet would be is MC were to support 7.1 channel output with >= 7.1 channels selected
Logged

hulkss

  • Galactic Citizen
  • ****
  • Posts: 451
Re: Help Needed DSP Settings and ConvolverVST Plugin
« Reply #2 on: December 12, 2011, 11:47:12 pm »

I think the best bet would be is MC were to support 7.1 channel output with >= 7.1 channels selected

Agreed, how do I get the attention of the JRiver MC wizards?
Logged

hulkss

  • Galactic Citizen
  • ****
  • Posts: 451
Re: Help Needed DSP Settings and ConvolverVST Plugin
« Reply #3 on: December 12, 2011, 11:50:34 pm »

I use plogue bidule as a vst plugin inside MC. I don't think this would help you however, as you still need to set MC to 16 channels.

What if I used the standalone version of Bidule?
Logged

Trumpetguy

  • Citizen of the Universe
  • *****
  • Posts: 974
Re: Help Needed DSP Settings and ConvolverVST Plugin
« Reply #4 on: December 13, 2011, 09:35:20 am »

hi

I use plogue bidule as a vst plugin inside MC.

I don't think this would help you however, as you still need to set MC to 16 channels. You would need a VST plugin to do the 7.1 conversion within bidule.

I think the best bet would be is MC were to support 7.1 channel output with >= 7.1 channels selected

It would be most interesting if you could post a few words on how you do this and your experiences, maybe in a separate thread?
Logged

BradC

  • World Citizen
  • ***
  • Posts: 207
Re: Help Needed DSP Settings and ConvolverVST Plugin
« Reply #5 on: December 13, 2011, 05:09:01 pm »

What if I used the standalone version of Bidule?

Yes that would probably work. I use that approach to apply minimum phase corrections to TMT5. But I am not using DSP crossovers. Nevertheless, I still think that you can have 8 channels in and 16 out with the standalone version.

What soundcard are you using?

For the external plogue bidule to work, you need to loopback the 8 channels.

See this thread for a reasonably detailed description of the process
http://www.martinloganowners.com/forum/showthread.php?7342-How-much-can-a-computer-do&p=82515
Logged

hulkss

  • Galactic Citizen
  • ****
  • Posts: 451
Re: Help Needed DSP Settings and ConvolverVST Plugin
« Reply #6 on: December 13, 2011, 06:56:15 pm »

What soundcard are you using?

I have a LYNX Aurora 16-VT with USB connection.
Logged

Matt

  • Administrator
  • Citizen of the Universe
  • *****
  • Posts: 42323
  • Shoes gone again!
Re: Help Needed DSP Settings, ConvolverVST Plugin & Audiolense
« Reply #7 on: December 13, 2011, 10:51:50 pm »

To make sure I understand:

When you select '16 channels' in DSP Studio > Output Format, you want JRSS upmixing to mix to 7.1 into the first 8 channels of the 16 channel output?
Logged
Matt Ashland, JRiver Media Center

hulkss

  • Galactic Citizen
  • ****
  • Posts: 451
Re: Help Needed DSP Settings, ConvolverVST Plugin & Audiolense
« Reply #8 on: December 14, 2011, 12:45:19 am »

To make sure I understand:
When you select '16 channels' in DSP Studio > Output Format, you want JRSS upmixing to mix to 7.1 into the first 8 channels of the 16 channel output?

Yes, I think that should do it for just about any 7.1 system configured with Audiolense.
My ConvolverVST plugin looks like this:



I assume the MC digital volume then does all 16 channels as the last item in the signal chain?

Into ConvolverVST:
1 Left
2 Right
3 Center
4 Low Frequency
5 Back Left
6 Back Right
7 Side Left
8 Side Right
9-16 Silent (ignored by ConvolverVST) I assume

Out of ConvolverVST in my case:
1  Left Low
2  Left Mid
3  Left Hi
4  Right Low
5  Right Mid
6  Right Hi
7  Center Low
8  Center Mid
9  Center Hi
10 Front Center Sub
11 Back Left
12 Back Right
13 Side Left
14 Side Right
15 Front Left Sub
16 Front Right Sub





Logged

rlebrette

  • Guest
Re: Help Needed DSP Settings, ConvolverVST Plugin & Audiolense
« Reply #9 on: December 14, 2011, 02:12:26 pm »

I'm interested to understand how VST/DX filters are chained in DSP. The documentation is not clear enough about this. Even in the new DSP view it's not clear to understand how VST/DX pins are assigned.
Several plugins are stereo only, is there any way to plug them on specific channels (L/R, SL/LR, etc)?
If not, is it something that could be implemented?
On Homecinema-fr (a french forum dedicated to HIFI and HT) we have some users using Ozone VST which is known as one of the best stereo filter.
I've not been able to use it in a multi-channel configuration,
Logged

BradC

  • World Citizen
  • ***
  • Posts: 207
Re: Help Needed DSP Settings, ConvolverVST Plugin & Audiolense
« Reply #10 on: December 14, 2011, 05:20:58 pm »

To make sure I understand:

When you select '16 channels' in DSP Studio > Output Format, you want JRSS upmixing to mix to 7.1 into the first 8 channels of the 16 channel output?

Yes, that would make the most sense.
Logged

hulkss

  • Galactic Citizen
  • ****
  • Posts: 451
Re: Help Needed DSP Settings, ConvolverVST Plugin & Audiolense
« Reply #11 on: December 14, 2011, 06:57:08 pm »

Ready to test in the next build this weekend :)
Logged

hulkss

  • Galactic Citizen
  • ****
  • Posts: 451
Re: Help Needed JR Surround Upmix, ConvolverVST Plugin, & Audiolense XO
« Reply #12 on: December 19, 2011, 12:07:20 am »

I gained some experience using JRiver MC and Audiolense for the first time this weekend. What a great combination for the ultimate in playback, loudspeaker control, and digital room correction :)

I'm only listening to stereo (no Blu-ray) so far. I have a 22' wide sound stage so it will be great with stereo upmixed to 7.1 using JR Surround Sound. I really miss the center speaker in the mix.

Thanks in advance Matt, for "JRSS upmixing to mix to 7.1 into the first 8 channels of the 16 channel output".
The final piece in my audio quest (at least for awhile).
Logged

rlebrette

  • Guest
Re: Help Needed JR Surround Upmix, ConvolverVST Plugin, & Audiolense XO
« Reply #13 on: December 19, 2011, 06:28:17 am »

It would be great that you write some kind of walkthrough on that...

Where, in the DSP chain, do you apply the convolution? I'm surprised that you're doing that only on the stereo signal, especially in the 7.1 scenario.
Logged

Matt

  • Administrator
  • Citizen of the Universe
  • *****
  • Posts: 42323
  • Shoes gone again!
Re: Help Needed JR Surround Upmix, ConvolverVST Plugin, & Audiolense XO
« Reply #14 on: December 19, 2011, 11:56:39 am »

Coming in 17.0.57 and newer:
Changed: JRSS is now supported when doing 12, 16, 24, and 32 channel output (JRSS will populate 7.1 and the other channels will be silent).

Feedback and testing appreciated.
Logged
Matt Ashland, JRiver Media Center

hulkss

  • Galactic Citizen
  • ****
  • Posts: 451
Re: Help Needed JR Surround Upmix, ConvolverVST Plugin, & Audiolense XO
« Reply #15 on: December 19, 2011, 09:12:48 pm »

Coming in 17.0.57 and newer:
Changed: JRSS is now supported when doing 12, 16, 24, and 32 channel output (JRSS will populate 7.1 and the other channels will be silent).

Fantastic ;D You guys are the best!

I hope 17.0.57 is next :D

Update: Going to test 17.0.59 December 22
Logged

hulkss

  • Galactic Citizen
  • ****
  • Posts: 451
Re: Help Needed JR Surround Upmix, ConvolverVST Plugin, & Audiolense XO
« Reply #16 on: December 19, 2011, 09:28:32 pm »

It would be great that you write some kind of walkthrough on that...Where, in the DSP chain, do you apply the convolution? I'm surprised that you're doing that only on the stereo signal, especially in the 7.1 scenario.

The convolution should occur before any reduction in volume like Replay Gain or Digital Volume adjustments for max resolution. The ConvolverVST plugin is set to take in up to 7.1 (8 channels) in the standard order I listed earlier. It then performs the filtering that was developed in Audiolense for my specific system and room. I my case ConvolverVST does some active crossover duty, digital speaker/room correction, and outputs 16 channels of audio to my outboard USB DAC which is connected straight into switching power amps from Class D Audio.
Logged

rlebrette

  • Guest
Re: Help Needed JR Surround Upmix, ConvolverVST Plugin, & Audiolense XO
« Reply #17 on: December 21, 2011, 06:27:31 am »

Thanks, now it's clearer.
Logged

hulkss

  • Galactic Citizen
  • ****
  • Posts: 451
Re: [Resolved] JRSS, ConvolverVST, Audiolense XO
« Reply #18 on: December 23, 2011, 08:08:26 pm »

JRSS works great up mixing to 7.1 with 16 channels selected. ConvolverVST is routing 8 into 16 channels.
I'll test more this week.
Logged

Matt

  • Administrator
  • Citizen of the Universe
  • *****
  • Posts: 42323
  • Shoes gone again!
Re: [Resolved] JRSS, ConvolverVST, Audiolense XO
« Reply #19 on: December 23, 2011, 08:15:34 pm »

JRSS works great up mixing to 7.1 with 16 channels selected. ConvolverVST is routing 8 into 16 channels.
I'll test more this week.

Thanks for letting us know.

You might post a description and pictures of your system sometime here.  It's fun for us to see the amazing things people do with the program.
Logged
Matt Ashland, JRiver Media Center
Pages: [1]   Go Up