INTERACT FORUM

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: How to downgrade from 143 to 136  (Read 2212 times)

sla

  • Junior Woodchuck
  • **
  • Posts: 92
How to downgrade from 143 to 136
« on: March 07, 2013, 07:22:05 am »
How to downgrade from 143 to 136? I have updated Media Center to 143 but now I cannot revert back. When I uninstall 143 completely and then install 136 and then restore library from 136 I got error when playing audio files:

"Something went wrong with playback.... You may not have installed DirectShow filters for decoding the type of files you are trying to open"...

When I uninstall 136 and install 143 again and restore the library from 136 all is fine...

Right now 143 has a broken "jump forward/forward" in DSD...

Any ideas?
Logged
JRiver on Silent/Fanless STREACOM FC5 EVO -> DSD through Firewire on Mytek 192 DSD -> CODA 05r pre/CODA 10.5 amp -> Sonics Amerigo Speakers

sla

  • Junior Woodchuck
  • **
  • Posts: 92
Re: How to downgrade from 143 to 136
« Reply #1 on: March 07, 2013, 07:58:47 am »
I see on other posts that people have also problem with 136. I downgraded to 128 and it seems it is ok -> jump foward/foward works in DSD mode. so that seems to be a problem with 143
Logged
JRiver on Silent/Fanless STREACOM FC5 EVO -> DSD through Firewire on Mytek 192 DSD -> CODA 05r pre/CODA 10.5 amp -> Sonics Amerigo Speakers

JimH

  • Administrator
  • Citizen of the Universe
  • *****
  • Posts: 72538
  • Where did I put my teeth?
Re: How to downgrade from 143 to 136
« Reply #2 on: March 07, 2013, 08:52:44 am »
144 is out now.  What is the problem you had with 143?
Logged

sla

  • Junior Woodchuck
  • **
  • Posts: 92
Re: How to downgrade from 143 to 136
« Reply #3 on: March 07, 2013, 09:26:46 am »
Seek/jump forward in DSD files (iso and dff) crashes JRiver each time. I checked 144 -> same thing.
Logged
JRiver on Silent/Fanless STREACOM FC5 EVO -> DSD through Firewire on Mytek 192 DSD -> CODA 05r pre/CODA 10.5 amp -> Sonics Amerigo Speakers

JimH

  • Administrator
  • Citizen of the Universe
  • *****
  • Posts: 72538
  • Where did I put my teeth?
Re: How to downgrade from 143 to 136
« Reply #4 on: March 07, 2013, 09:34:24 am »
What device are you using to play DSD?
Logged

sla

  • Junior Woodchuck
  • **
  • Posts: 92
Re: How to downgrade from 143 to 136
« Reply #5 on: March 07, 2013, 09:43:27 am »
works in 128, and it does not seem to work in 136,143,144.

As to device. Mytek 192 DSD, USB and Firewire mode...
Logged
JRiver on Silent/Fanless STREACOM FC5 EVO -> DSD through Firewire on Mytek 192 DSD -> CODA 05r pre/CODA 10.5 amp -> Sonics Amerigo Speakers

Matt

  • Administrator
  • Citizen of the Universe
  • *****
  • Posts: 42441
  • Shoes gone again!
Re: How to downgrade from 143 to 136
« Reply #6 on: March 07, 2013, 10:06:38 am »
I'm sorry about this.

Next build:
Fixed: Seeking while bitstreaming DSD could crash.

The problem started here:
18.0.132 (2/14/2013)
6. Fixed: SACD playback could have a slight tick between tracks when the ISO file used DST compression.
8. Changed: DSD playback as PCM uses continuous filters between tracks instead of new filters each track, removing a possible subtle noise at track boundaries.
Logged
Matt Ashland, JRiver Media Center

sla

  • Junior Woodchuck
  • **
  • Posts: 92
Re: How to downgrade from 143 to 136
« Reply #7 on: March 07, 2013, 02:49:13 pm »
No problem. I am not usually using it so I did not notice. The clicks are gone and I am very happy about it. I'd rather keep "no clicks" than "seek/forward" possibility...

I would like to ask you: you said you have 3 myteks so I was wondering why? -> Now I think I know -> Are you chaining 3 myteks to get 5.1 SACD sound?
Is that possible?
Logged
JRiver on Silent/Fanless STREACOM FC5 EVO -> DSD through Firewire on Mytek 192 DSD -> CODA 05r pre/CODA 10.5 amp -> Sonics Amerigo Speakers

mojave

  • MC Beta Team
  • Citizen of the Universe
  • *****
  • Posts: 3732
  • Requires "iTunes or better" so I installed JRiver
Re: How to downgrade from 143 to 136
« Reply #8 on: March 07, 2013, 03:53:16 pm »
Quote from: sla on March 07, 2013, 02:49:13 pm
I would like to ask you: you said you have 3 myteks so I was wondering why? -> Now I think I know -> Are you chaining 3 myteks to get 5.1 SACD sound?
Is that possible?
Who said they have 3 myteks? Matt?

Ted_B from another forum had 3 Myteks for multi-channel DSD. With the ASIO driver they show up as one audio device.
Logged

Matt

  • Administrator
  • Citizen of the Universe
  • *****
  • Posts: 42441
  • Shoes gone again!
Re: How to downgrade from 143 to 136
« Reply #9 on: March 07, 2013, 03:59:45 pm »
We do have three Myteks.  We were helping Mytek test multi-channel SACD for an upcoming review.

For me, the configuration is trouble free.  I hooked three to the same hub and they just magically work like one 6 channel card with ASIO.
Logged
Matt Ashland, JRiver Media Center

sla

  • Junior Woodchuck
  • **
  • Posts: 92
Re: How to downgrade from 143 to 136
« Reply #10 on: March 07, 2013, 04:59:29 pm »
that is awesome... that should be voted as a feature of the century! [ok... maybe I exaggerated a little...]
Logged
JRiver on Silent/Fanless STREACOM FC5 EVO -> DSD through Firewire on Mytek 192 DSD -> CODA 05r pre/CODA 10.5 amp -> Sonics Amerigo Speakers

sla

  • Junior Woodchuck
  • **
  • Posts: 92
Re: How to downgrade from 143 to 136
« Reply #11 on: March 14, 2013, 07:19:00 am »
Matt: that was my concern with 146, the "Seeking while bitstreaming DSD could crash" is fixed by now we have ticks back:

It reversed the fix from 132...
"6. Fixed: SACD playback could have a slight tick between tracks when the ISO file used DST compression"

So I am sticking with 136 for now...
Logged
JRiver on Silent/Fanless STREACOM FC5 EVO -> DSD through Firewire on Mytek 192 DSD -> CODA 05r pre/CODA 10.5 amp -> Sonics Amerigo Speakers
Pages: [1]   Go Up
« previous next »