Topic: Setup JRiver Media Center 20 In Ubuntu/Linux Mint (Read 133949 times)

aoqw76 · « **Reply #50 on:** February 24, 2015, 11:48:29 am »

Quote from: 85Duppie on February 22, 2015, 11:01:51 pm

I have been running MC 19 in Ubuntu. I followed the instructions in this post for MC 20. It looks like it downloaded and installed, but I can still only launch MC 19 from that installation. Where do I look to find MC 20 and get an icon for it on my launch bar?

If you have both installed, then this will prove it:
robert@robert-nas:~/scripts$ ls -l /usr/bin | grep mediacenter
-rwxr-xr-x 1 root root 20987764 Aug 6 2014 mediacenter19
-rwxr-xr-x 1 root root 20089684 Feb 20 21:56 mediacenter20

And if you want to run version 20, then this will do it:
/usr/bin/mediacenter20

also see the very first post:

Quote

Now assuming all dependencies are met, you've been successful at installing Media Center 20 in Ubuntu! To start Media Center either go into the Unity dash and search for Media Center 20 or you can run it from the terminal via this command...

Code: [Select]
mediacenter20

85Duppie · « **Reply #51 on:** February 24, 2015, 03:33:41 pm »

Thank you for your suggestions. That brought up Media Center 20. I was looking for the icon in the applications section and could not find it. Would it show up if I deleted Media Center 19?

Awesome Donkey · « **Reply #52 on:** February 24, 2015, 03:50:58 pm »

In this case, I'd recommend making a backup of your MC19 settings somewhere you can find them (like the desktop), then completely remove Media Center 19 via the Terminal. For good measure, it'd probably be a good idea to reinstall MC20 then.

85Duppie · « **Reply #53 on:** February 24, 2015, 04:36:40 pm »

Thank you for your suggestions.

I did get MC 20 to run from a command, but it locks up shortly afterwards.

What are the commands to use to uninstall software? I think I should remove both versions and then do a clean install of MC 20.

What is Synaptic?

Awesome Donkey · « **Reply #54 on:** February 24, 2015, 04:55:16 pm »

Okay, let's make it as simple as possible for you. Just put the following into the Terminal;

Code: [Select]

sudo apt-get remove mediacenter19
That should remove Media Center 19. Remember to backup your library + settings first!

EDIT: Added tutorial for removing Media Center 19 and Media Center 20 to the first page.

85Duppie · « **Reply #55 on:** February 24, 2015, 05:15:52 pm »

I found Synaptic and it looks fairly straight forward.

How does one back up settings?

I need to go to a meeting for a few hours, then I'll resume with MC.

85Duppie · « **Reply #56 on:** February 24, 2015, 05:19:42 pm »

Thanks for your help. That should make things easy for me.

Awesome Donkey · « **Reply #57 on:** February 24, 2015, 05:37:24 pm »

Yes, hope it works out for you (it should).

Also, I've added the APT repository tutorial for those who want to add it.

85Duppie · « **Reply #58 on:** February 25, 2015, 12:34:13 am »

I was able to uninstall MC 19 and MC 20. I then used your commands to download the latest version and the install went like clockwork. I saw the icon in the applications section and the MC 20 will launch.

The only command that did not work was the one to install the license key. I did receive the .mjr file, but the system tells me it could not restore the license from that file. I checked the file and made sure I entered it correctly but no success.

Thank you for your support. You have been very helpful.

85Duppie · « **Reply #59 on:** February 25, 2015, 12:46:14 am »

I just tried the code I have for registration on the Help Menu in MC, and I received a registration completed message. I checked the registration information and it shows a registered product, not a 30 day expiration. It did not show it registered to my name. I guess it won't expire. I'm ready to test drive it and see how it works.

85Duppie · « **Reply #60 on:** February 27, 2015, 03:12:41 pm »

I have installed and tried both MC 20.0.70 and MC 20.0.74. Both versions will not run much more that 15 to 20 minutes without crashing, frequently it will crash even sooner. Either version plays really great when it works, but with the continuous crashing, it's not usable.

Isn't there a way to capture a log from MC that could be sent in to help resolve the problem?

bob · « **Reply #61 on:** February 27, 2015, 03:24:03 pm »

Quote from: 85Duppie on February 27, 2015, 03:12:41 pm

I have installed and tried both MC 20.0.70 and MC 20.0.74. Both versions will not run much more that 15 to 20 minutes without crashing, frequently it will crash even sooner. Either version plays really great when it works, but with the continuous crashing, it's not usable.

Isn't there a way to capture a log from MC that could be sent in to help resolve the problem?

Turn on logging under help. The log is in the users home directory under
.jriver/Media Center 20/Log.txt

On my system it never crashes so I suspect you have an issue with the distro and architecture you are using or perhaps a hardware issue.

The distro supported by JRiver is Debian Wheezy i386.

85Duppie · « **Reply #62 on:** February 27, 2015, 03:36:44 pm »

Turn on logging under help. The log is in the users home directory under
.jriver/Media Center 20/Log.txt

On my system it never crashes so I suspect you have an issue with the distro and architecture you are using or perhaps a hardware issue.

The distro supported by JRiver is Debian Wheezy i386.

Thank you for your help. Can I attach a log in a forum message? I have been running MC 19 for over months with Ubuntu 14.04 LTS and it only recently was giving me trouble over about the last month or so.

bob · « **Reply #63 on:** February 27, 2015, 03:38:56 pm »

Quote from: 85Duppie on February 27, 2015, 03:36:44 pm

Turn on logging under help. The log is in the users home directory under
.jriver/Media Center 20/Log.txt

On my system it never crashes so I suspect you have an issue with the distro and architecture you are using or perhaps a hardware issue.

The distro supported by JRiver is Debian Wheezy i386.

Thank you for your help. Can I attach a log in a forum message? I have been running MC 19 for over months with Ubuntu 14.04 LTS and it only recently was giving me trouble over about the last month or so.

If you zip the file you should be able to attach the log.

I'm suspicious about your description of the problem. It sounds like a hardware error to me. I'd start with a memory test.

85Duppie · « **Reply #64 on:** February 27, 2015, 04:15:12 pm »

Quote from: bob on February 27, 2015, 03:38:56 pm

If you zip the file you should be able to attach the log.

I'm suspicious about your description of the problem. It sounds like a hardware error to me. I'd start with a memory test.

I have been thinking the old computer may be giving up. It is 9 1/2 years old and I did replace a power supply along the way. Is there a memory test function in Ubuntu?
My next thought is to try it on another computer.

Awesome Donkey · « **Reply #65 on:** February 27, 2015, 05:30:37 pm »

I'd recommend grabbing the MemTest86 ISO, burning it to a CD then booting from the CD to use MemTest86.

bob · « **Reply #66 on:** February 27, 2015, 07:05:33 pm »

Quote from: 85Duppie on February 27, 2015, 04:15:12 pm

I have been thinking the old computer may be giving up. It is 9 1/2 years old and I did replace a power supply along the way. Is there a memory test function in Ubuntu?
My next thought is to try it on another computer.

cat /proc/cpuinfo from a terminal.
It better support at least sse2

85Duppie · « **Reply #67 on:** February 27, 2015, 09:35:31 pm »

Quote from: bob on February 27, 2015, 07:05:33 pm

cat /proc/cpuinfo from a terminal.
It better support at least sse2

I tried to load MC 20 on my laptop (also running Ubuntu 14.04) and it will not properly load. The icon does not appear in my applications section, so I launch it with the mediacenter20 command in Terminal. The following comes up in the Terminal screen:

(mediacenter20:6710): Gtk-WARNING **: Unable to locate theme engine in module_path: "murrine",

(mediacenter20:6710): Gtk-WARNING **: Unable to locate theme engine in module_path: "murrine",

(mediacenter20:6710): Gtk-WARNING **: Unable to locate theme engine in module_path: "murrine",

(mediacenter20:6710): Gtk-WARNING **: Unable to locate theme engine in module_path: "murrine",

(mediacenter20:6710): Gtk-WARNING **: Unable to locate theme engine in module_path: "murrine",

(mediacenter20:6710): Gtk-WARNING **: Unable to locate theme engine in module_path: "murrine",

(mediacenter20:6710): Gtk-WARNING **: Unable to locate theme engine in module_path: "murrine",

(mediacenter20:6710): Gtk-WARNING **: Unable to locate theme engine in module_path: "murrine",

(mediacenter20:6710): Gtk-WARNING **: Unable to locate theme engine in module_path: "murrine",

(mediacenter20:6710): Gtk-WARNING **: Unable to locate theme engine in module_path: "murrine",

(mediacenter20:6710): Gtk-WARNING **: Unable to locate theme engine in module_path: "murrine",
Found 0 devices (devices will be listed below)

Total time: 8 ms
Result: 0

Does this mean MC 20 is incompatible with Ubuntu? When MC 20 did come up, Clicking on buttons and objects did not work properly. You had to point above the object you wanted to click on.

About a year ago, I had MC 19 running on this same laptop. I believe that was Ubuntu 13.

bob · « **Reply #68 on:** February 27, 2015, 10:45:40 pm »

Quote from: 85Duppie on February 27, 2015, 09:35:31 pm

I tried to load MC 20 on my laptop (also running Ubuntu 14.04) and it will not properly load. The icon does not appear in my applications section, so I launch it with the mediacenter20 command in Terminal. The following comes up in the Terminal screen:

(mediacenter20:6710): Gtk-WARNING **: Unable to locate theme engine in module_path: "murrine",

(mediacenter20:6710): Gtk-WARNING **: Unable to locate theme engine in module_path: "murrine",

(mediacenter20:6710): Gtk-WARNING **: Unable to locate theme engine in module_path: "murrine",

(mediacenter20:6710): Gtk-WARNING **: Unable to locate theme engine in module_path: "murrine",

(mediacenter20:6710): Gtk-WARNING **: Unable to locate theme engine in module_path: "murrine",

(mediacenter20:6710): Gtk-WARNING **: Unable to locate theme engine in module_path: "murrine",

(mediacenter20:6710): Gtk-WARNING **: Unable to locate theme engine in module_path: "murrine",

(mediacenter20:6710): Gtk-WARNING **: Unable to locate theme engine in module_path: "murrine",

(mediacenter20:6710): Gtk-WARNING **: Unable to locate theme engine in module_path: "murrine",

(mediacenter20:6710): Gtk-WARNING **: Unable to locate theme engine in module_path: "murrine",

(mediacenter20:6710): Gtk-WARNING **: Unable to locate theme engine in module_path: "murrine",
Found 0 devices (devices will be listed below)

Total time: 8 ms
Result: 0

Does this mean MC 20 is incompatible with Ubuntu? When MC 20 did come up, Clicking on buttons and objects did not work properly. You had to point above the object you wanted to click on.

About a year ago, I had MC 19 running on this same laptop. I believe that was Ubuntu 13.

MC is compiled only on debian wheezy i386. Ubuntu is based on debian but is not exactly the same. I've seen that behavior on one ubuntu system, once you move the window it's fine. Don't know what the deal is. Try moving it with alt-left click and everything should sort itself out.

Awesome Donkey · « **Reply #69 on:** March 01, 2015, 02:34:16 pm »

I've not seen that behaviour on my systems. Do you have all dependencies satisfied? According to the Google search I did, you can try these in a Terminal;

Code: [Select]

sudo apt-get install gtk2-engines:i386
sudo apt-get install gtk2-engines-*:i386
sudo apt-get install libgtkmm-2.4-1c2:i386
sudo apt-get install libcanberra-gtk-module:i386

That error is from missing the gtk2-engines-murrine and/or gtk2-engines-murrine:i386 package.

I think I'll add getting custom skins working on Ubuntu to the tutorial next.

85Duppie · « **Reply #70 on:** March 02, 2015, 04:10:29 pm »

Quote from: Awesome Donkey on March 01, 2015, 02:34:16 pm

I've not seen that behaviour on my systems. Do you have all dependencies satisfied? According to the Google search I did, you can try these in a Terminal;

Code: [Select]
sudo apt-get install gtk2-engines:i386 sudo apt-get install gtk2-engines-*:i386 sudo apt-get install libgtkmm-2.4-1c2:i386 sudo apt-get install libcanberra-gtk-module:i386
That error is from missing the gtk2-engines-murrine and/or gtk2-engines-murrine:i386 package.

I think I'll add getting custom skins working on Ubuntu to the tutorial next.

Thank you for your input. I'll give that a try.

wellywu · « **Reply #71 on:** March 02, 2015, 06:58:42 pm »

I did a clean installation of Ubuntu 14.04.2 64 bit LTS GNU/Linux on my Lenovo IdeaPad Y510P notebook PC and this is what I get:

wellywu@IdeaPadY510P:~$ sudo apt-get install libx11-6:i386 libc6:i386 libasound2:i386 libuuid1:i386 libssl1.0.0:i386 libidn11:i386 libstdc++6:i386 libxcb1:i386 libxau6:i386 libxdmcp6:i386 zlib1g:i386 libxext6:i386 libgtk2.0-0:i386 libp11-kit0:i386 p11-kit-modules:i386 libgl1-mesa-glx:i386 libcanberra-gtk-module:i386 xdg-utils lib32stdc++6 xfonts-75dpi xfonts-100dpi lame vorbis-tools musepack-tools
Reading package lists... Done
Building dependency tree
Reading state information... Done
xfonts-100dpi is already the newest version.
xfonts-100dpi set to manually installed.
xfonts-75dpi is already the newest version.
xfonts-75dpi set to manually installed.
libasound2:i386 is already the newest version.
libasound2:i386 set to manually installed.
libp11-kit0:i386 is already the newest version.
libp11-kit0:i386 set to manually installed.
libstdc++6:i386 is already the newest version.
libstdc++6:i386 set to manually installed.
libx11-6:i386 is already the newest version.
libx11-6:i386 set to manually installed.
libxau6:i386 is already the newest version.
libxau6:i386 set to manually installed.
libxcb1:i386 is already the newest version.
libxdmcp6:i386 is already the newest version.
libxdmcp6:i386 set to manually installed.
libxext6:i386 is already the newest version.
libxext6:i386 set to manually installed.
zlib1g:i386 is already the newest version.
xdg-utils is already the newest version.
xdg-utils set to manually installed.
libc6:i386 is already the newest version.
libssl1.0.0:i386 is already the newest version.
libssl1.0.0:i386 set to manually installed.
libuuid1:i386 is already the newest version.
libuuid1:i386 set to manually installed.
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:

The following packages have unmet dependencies:
libcheese-gtk23 : Depends: libclutter-gtk-1.0-0 (>= 0.91.

but it is not going to be installed
Depends: libcogl15 (>= 1.15.

but it is not going to be installed
libcheese7 : Depends: libclutter-gst-2.0-0 (>= 0.10.0) but it is not going to be installed
Depends: gstreamer1.0-clutter but it is not going to be installed
libclutter-1.0-0 : Depends: libcogl-pango15 (>= 1.15.

but it is not going to be installed
Depends: libcogl15 (>= 1.15.

but it is not going to be installed
libgl1-mesa-glx:i386 : Depends: libglapi-mesa:i386 (= 10.1.3-0ubuntu0.3)
Recommends: libgl1-mesa-dri:i386 (>= 7.2)
E: Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages.
wellywu@IdeaPadY510P:~$

aoqw76 · « **Reply #72 on:** March 03, 2015, 02:19:37 am »

how to fix broken packages http://askubuntu.com/questions/118749/package-system-is-broken-how-to-fix-it
You probably just need this

Code: [Select]

sudo apt-get install -f

wellywu · « **Reply #73 on:** March 03, 2015, 02:40:07 am »

Canonical upgraded the X.Org display server and client to Utopic Unicorn with Ubuntu 14.04.2 64 bit LTS GNU/Linux. Sudo apt-get -f install does not fix these broken packages because I've already tried it. I also tried Synaptic's fix broken packages and it does not fix the problem. I think that J River has to test this on a QA platform and fix their installation instructions so Media Center will completely install and work properly. Please look into this issue for me. Thank you.

wellywu · « **Reply #74 on:** March 03, 2015, 02:42:06 am »

wellywu@IdeaPadY510P:~$ sudo apt-get install libx11-6:i386 libc6:i386 libasound2:i386 libuuid1:i386 libssl1.0.0:i386 libidn11:i386 libstdc++6:i386 libxcb1:i386 libxau6:i386 libxdmcp6:i386 zlib1g:i386 libxext6:i386 libgtk2.0-0:i386 libp11-kit0:i386 p11-kit-modules:i386 libgl1-mesa-glx:i386 libcanberra-gtk-module:i386 xdg-utils lib32stdc++6 xfonts-75dpi xfonts-100dpi lame vorbis-tools musepack-tools
Reading package lists... Done
Building dependency tree
Reading state information... Done
xfonts-100dpi is already the newest version.
xfonts-100dpi set to manually installed.
xfonts-75dpi is already the newest version.
xfonts-75dpi set to manually installed.
libasound2:i386 is already the newest version.
libasound2:i386 set to manually installed.
libp11-kit0:i386 is already the newest version.
libp11-kit0:i386 set to manually installed.
libstdc++6:i386 is already the newest version.
libstdc++6:i386 set to manually installed.
libx11-6:i386 is already the newest version.
libx11-6:i386 set to manually installed.
libxau6:i386 is already the newest version.
libxau6:i386 set to manually installed.
libxcb1:i386 is already the newest version.
libxdmcp6:i386 is already the newest version.
libxdmcp6:i386 set to manually installed.
libxext6:i386 is already the newest version.
libxext6:i386 set to manually installed.
zlib1g:i386 is already the newest version.
xdg-utils is already the newest version.
xdg-utils set to manually installed.
libc6:i386 is already the newest version.
libssl1.0.0:i386 is already the newest version.
libssl1.0.0:i386 set to manually installed.
libuuid1:i386 is already the newest version.
libuuid1:i386 set to manually installed.
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:

The following packages have unmet dependencies:
libcheese-gtk23 : Depends: libclutter-gtk-1.0-0 (>= 0.91.

but it is not going to be installed
Depends: libcogl15 (>= 1.15.

but it is not going to be installed
libcheese7 : Depends: libclutter-gst-2.0-0 (>= 0.10.0) but it is not going to be installed
Depends: gstreamer1.0-clutter but it is not going to be installed
libclutter-1.0-0 : Depends: libcogl-pango15 (>= 1.15.

but it is not going to be installed
Depends: libcogl15 (>= 1.15.

but it is not going to be installed
libgl1-mesa-glx:i386 : Depends: libglapi-mesa:i386 (= 10.1.3-0ubuntu0.3)
Recommends: libgl1-mesa-dri:i386 (>= 7.2)
E: Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages.
wellywu@IdeaPadY510P:~$ sudo apt-get -f install
Reading package lists... Done
Building dependency tree
Reading state information... Done
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
wellywu@IdeaPadY510P:~$

wellywu · « **Reply #75 on:** March 03, 2015, 02:45:25 am »

wellywu@IdeaPadY510P:~$ sudo apt-get install libx11-6:i386 libc6:i386 libasound2:i386 libuuid1:i386 libssl1.0.0:i386 libidn11:i386 libstdc++6:i386 libxcb1:i386 libxau6:i386 libxdmcp6:i386 zlib1g:i386 libxext6:i386 libgtk2.0-0:i386 libp11-kit0:i386 p11-kit-modules:i386 libgl1-mesa-glx:i386 libcanberra-gtk-module:i386 xdg-utils lib32stdc++6 xfonts-75dpi xfonts-100dpi lame vorbis-tools musepack-tools
[sudo] password for wellywu:
Reading package lists... Done
Building dependency tree
Reading state information... Done
xfonts-100dpi is already the newest version.
xfonts-100dpi set to manually installed.
xfonts-75dpi is already the newest version.
xfonts-75dpi set to manually installed.
libasound2:i386 is already the newest version.
libasound2:i386 set to manually installed.
libp11-kit0:i386 is already the newest version.
libp11-kit0:i386 set to manually installed.
libstdc++6:i386 is already the newest version.
libstdc++6:i386 set to manually installed.
libx11-6:i386 is already the newest version.
libx11-6:i386 set to manually installed.
libxau6:i386 is already the newest version.
libxau6:i386 set to manually installed.
libxcb1:i386 is already the newest version.
libxdmcp6:i386 is already the newest version.
libxdmcp6:i386 set to manually installed.
libxext6:i386 is already the newest version.
libxext6:i386 set to manually installed.
zlib1g:i386 is already the newest version.
xdg-utils is already the newest version.
xdg-utils set to manually installed.
libc6:i386 is already the newest version.
libssl1.0.0:i386 is already the newest version.
libssl1.0.0:i386 set to manually installed.
libuuid1:i386 is already the newest version.
libuuid1:i386 set to manually installed.
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:

The following packages have unmet dependencies:
libcheese-gtk23 : Depends: libclutter-gtk-1.0-0 (>= 0.91.

but it is not going to be installed
Depends: libcogl15 (>= 1.15.

but it is not going to be installed
libcheese7 : Depends: libclutter-gst-2.0-0 (>= 0.10.0) but it is not going to be installed
Depends: gstreamer1.0-clutter but it is not going to be installed
libclutter-1.0-0 : Depends: libcogl-pango15 (>= 1.15.

but it is not going to be installed
Depends: libcogl15 (>= 1.15.

but it is not going to be installed
libgl1-mesa-glx:i386 : Depends: libglapi-mesa:i386 (= 10.1.3-0ubuntu0.3)
Recommends: libgl1-mesa-dri:i386 (>= 7.2)
E: Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages.
wellywu@IdeaPadY510P:~$ sudo apt-get install libgl1-mesa-dri:i386
Reading package lists... Done
Building dependency tree
Reading state information... Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:

The following packages have unmet dependencies:
unity-control-center : Depends: libcheese-gtk23 (>= 3.4.0) but it is not going to be installed
Depends: libcheese7 (>= 3.0.1) but it is not going to be installed
E: Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages.
wellywu@IdeaPadY510P:~$ sudo apt-get install libcheese-gtk23 libcheese7
Reading package lists... Done
Building dependency tree
Reading state information... Done
libcheese-gtk23 is already the newest version.
libcheese-gtk23 set to manually installed.
libcheese7 is already the newest version.
libcheese7 set to manually installed.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
wellywu@IdeaPadY510P:~$ sudo apt-get -f install
Reading package lists... Done
Building dependency tree
Reading state information... Done
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
wellywu@IdeaPadY510P:~$

aoqw76 · « **Reply #76 on:** March 03, 2015, 03:21:06 am »

Ubuntu technically isn't supported by JRiver, the supported distro = Debian wheezy i386. These instructions are written by forum members not by JRiver.
What happens if you try to install mediacenter by itself, have you tried this via the apt repository?

wellywu · « **Reply #77 on:** March 03, 2015, 03:42:20 am »

I added the GnuPG signing key for JRiver and I successfully installed Media Center 20, but it doesn't work. When I try to select my Oppo Digital HA-1, it isn't listed. I have not tested to see if it will play audio or music yet. Give me a few more hours to figure this out from this point and I'll update this thread.

Awesome Donkey · « **Reply #78 on:** March 03, 2015, 09:34:59 am »

Quote from: wellywu on March 03, 2015, 02:40:07 am

Canonical upgraded the X.Org display server and client to Utopic Unicorn with Ubuntu 14.04.2 64 bit LTS GNU/Linux. Sudo apt-get -f install does not fix these broken packages because I've already tried it. I also tried Synaptic's fix broken packages and it does not fix the problem. I think that J River has to test this on a QA platform and fix their installation instructions so Media Center will completely install and work properly. Please look into this issue for me. Thank you.

I'll try to get a VM of 14.04.2 running in the next few days to test this out. I can tell you however that it works just fine in a fresh 14.10 installation.

bob · « **Reply #79 on:** March 03, 2015, 10:38:56 am »

Quote from: wellywu on March 03, 2015, 03:42:20 am

I added the GnuPG signing key for JRiver and I successfully installed Media Center 20, but it doesn't work. When I try to select my Oppo Digital HA-1, it isn't listed. I have not tested to see if it will play audio or music yet. Give me a few more hours to figure this out from this point and I'll update this thread.

Assuming your Oppo device is a DAC, if the hardware devices aren't listed your user usually isn't in the audio group.

85Duppie · « **Reply #80 on:** March 03, 2015, 11:51:15 am »

Quote from: bob on February 27, 2015, 03:24:03 pm

Turn on logging under help. The log is in the users home directory under
.jriver/Media Center 20/Log.txt

On my system it never crashes so I suspect you have an issue with the distro and architecture you are using or perhaps a hardware issue.

The distro supported by JRiver is Debian Wheezy i386.

I did get MC 20 installed on my laptop as a check against my old tower that kept crashing. I still have the crash problem with the laptop. I did capture a log from the last crash that I attached to this post. I am running Ubuntu 14.04 and I loaded the gtk files suggested by Awesome Donkey on a post done yesterday.

Please let me know if it sheds any light on why MC crashes.

wellywu · « **Reply #81 on:** March 03, 2015, 11:55:08 am »

When I run MC 20 GNU/Linux, it freezes and I have to quit the program. I'll look into this issue more closely in the next few days to see what's going on in detail. I'll learn how to turn on logs and upload them, but what do I need to know to do this?

85Duppie · « **Reply #82 on:** March 03, 2015, 02:01:11 pm »

Quote from: wellywu on March 03, 2015, 11:55:08 am

When I run MC 20 GNU/Linux, it freezes and I have to quit the program. I'll look into this issue more closely in the next few days to see what's going on in detail. I'll learn how to turn on logs and upload them, but what do I need to know to do this?

Open the Help menu. There is an option for logging. Click that and then click on the option to turn on logging. Run the program until the problem happens again, then reopen it, Click on logging from the Help menu, then on the box to Report Problem. That should put a log file on your desktop that you can attach to a post for review.

Awesome Donkey · « **Reply #83 on:** March 03, 2015, 03:52:40 pm »

I can confirm the package breakage on 14.04.2 LTS. Looking into a solution now.

EDIT: The breakage occurs because of the libgl1-mesa-glx:i386 package. I'm going to remove it for the time being from the list, as MC20 seems to install and function completely fine without it (no errors or warnings).

wellywu · « **Reply #84 on:** March 03, 2015, 04:18:28 pm »

That's the same exact package that broke my Codeweavers' CrossOver for Ubuntu 64 bit GNU/Linux software application.

http://www.codeweavers.com

After I performed a clean installation of Ubuntu 14.04.2 64 bit LTS GNU/Linux, CrossOver and Media Center refused to install completely. I created a support ticket with Codweavers and they're investigating this specific software package and its missing dependencies on their QA test system. They'll get back to me when they know more information.

Now, I'm running into the same missing software dependencies with Media Center 20.

There's a couple of Launchpad bug reports about this specific software package and its missing dependencies, but I have to Google it to get more specific information for you and Codeweavers.

Unfortunately, I've been permanently banned at Ubuntu Forums, but I did request to have my account re-enabled. I have to wait for Elfy the administrator at Ubuntu Forums to decide to let me back into the community or not.

Awesome Donkey · « **Reply #85 on:** March 03, 2015, 04:33:53 pm »

An update, you should be able to install libgl1-mesa-glx-lts-utopic:i386 and it *should* work. This breakage is also affecting Steam it seems. I added a note for this on the first page.

85Duppie · « **Reply #86 on:** March 03, 2015, 04:55:39 pm »

Quote from: bob on February 27, 2015, 03:38:56 pm

If you zip the file you should be able to attach the log.

I'm suspicious about your description of the problem. It sounds like a hardware error to me. I'd start with a memory test.

I just got a second log from my old tower computer that was about 825 KB, too big to send. Is there an alternate way to send, or should I attempt to re create the problem with a smaller file? I ran for a couple of hours playing FLAC (all my files are FLAC) at 44/16. When I went to 192/24, it crashed as soon as I attempted to change tracks.

wellywu · « **Reply #87 on:** March 03, 2015, 05:10:23 pm »

wellywu@IdeaPadY510P:~$ libgl1-mesa-glx-lts-utopic:i386
libgl1-mesa-glx-lts-utopic:i386: command not found
wellywu@IdeaPadY510P:~$ sudo apt-get install libgl1-mesa-glx-lts-utopic:i386
[sudo] password for wellywu:
Reading package lists... Done
Building dependency tree
Reading state information... Done
libgl1-mesa-glx-lts-utopic:i386 is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
wellywu@IdeaPadY510P:~$ sudo apt-get install libx11-6:i386 libc6:i386 libasound2:i386 libuuid1:i386 libssl1.0.0:i386 libidn11:i386 libstdc++6:i386 libxcb1:i386 libxau6:i386 libxdmcp6:i386 zlib1g:i386 libxext6:i386 libgtk2.0-0:i386 libp11-kit0:i386 p11-kit-modules:i386 libgl1-mesa-glx:i386 libcanberra-gtk-module:i386 xdg-utils lib32stdc++6 xfonts-75dpi xfonts-100dpi lame vorbis-tools musepack-tools
Reading package lists... Done
Building dependency tree
Reading state information... Done
xfonts-100dpi is already the newest version.
xfonts-100dpi set to manually installed.
xfonts-75dpi is already the newest version.
xfonts-75dpi set to manually installed.
libasound2:i386 is already the newest version.
libasound2:i386 set to manually installed.
libidn11:i386 is already the newest version.
libidn11:i386 set to manually installed.
libp11-kit0:i386 is already the newest version.
libp11-kit0:i386 set to manually installed.
libstdc++6:i386 is already the newest version.
libstdc++6:i386 set to manually installed.
libx11-6:i386 is already the newest version.
libx11-6:i386 set to manually installed.
libxau6:i386 is already the newest version.
libxau6:i386 set to manually installed.
libxcb1:i386 is already the newest version.
libxdmcp6:i386 is already the newest version.
libxdmcp6:i386 set to manually installed.
libxext6:i386 is already the newest version.
libxext6:i386 set to manually installed.
zlib1g:i386 is already the newest version.
xdg-utils is already the newest version.
xdg-utils set to manually installed.
libc6:i386 is already the newest version.
libgtk2.0-0:i386 is already the newest version.
libgtk2.0-0:i386 set to manually installed.
libssl1.0.0:i386 is already the newest version.
libssl1.0.0:i386 set to manually installed.
libuuid1:i386 is already the newest version.
libuuid1:i386 set to manually installed.
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:

The following packages have unmet dependencies:
libcheese-gtk23 : Depends: libclutter-gtk-1.0-0 (>= 0.91.

but it is not going to be installed
Depends: libcogl15 (>= 1.15.

but it is not going to be installed
libcheese7 : Depends: libclutter-gst-2.0-0 (>= 0.10.0) but it is not going to be installed
Depends: gstreamer1.0-clutter but it is not going to be installed
libclutter-1.0-0 : Depends: libcogl-pango15 (>= 1.15.

but it is not going to be installed
Depends: libcogl15 (>= 1.15.

but it is not going to be installed
libgl1-mesa-glx:i386 : Depends: libglapi-mesa:i386 (= 10.1.3-0ubuntu0.3)
Recommends: libgl1-mesa-dri:i386 (>= 7.2)
E: Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages.
wellywu@IdeaPadY510P:~$

Awesome Donkey · « **Reply #88 on:** March 03, 2015, 05:23:20 pm »

Remove libgl1-mesa-glx:i386 from your list. It should work fine then. The first page has an updated Terminal command without libgl1-mesa-glx:i386 included by default.

wellywu · « **Reply #89 on:** March 03, 2015, 05:26:57 pm »

It worked!

wellywu@IdeaPadY510P:~$ sudo apt-get install libx11-6:i386 libc6:i386 libasound2:i386 libuuid1:i386 libssl1.0.0:i386 libidn11:i386 libstdc++6:i386 libxcb1:i386 libxau6:i386 libxdmcp6:i386 zlib1g:i386 libxext6:i386 libgtk2.0-0:i386 libp11-kit0:i386 p11-kit-modules:i386 libcanberra-gtk-module:i386 xdg-utils lib32stdc++6 xfonts-75dpi xfonts-100dpi lame vorbis-tools musepack-tools[sudo] password for wellywu:
Sorry, try again.
[sudo] password for wellywu:
Reading package lists... Done
Building dependency tree
Reading state information... Done
xfonts-100dpi is already the newest version.
xfonts-100dpi set to manually installed.
xfonts-75dpi is already the newest version.
xfonts-75dpi set to manually installed.
libasound2:i386 is already the newest version.
libasound2:i386 set to manually installed.
libidn11:i386 is already the newest version.
libidn11:i386 set to manually installed.
libp11-kit0:i386 is already the newest version.
libp11-kit0:i386 set to manually installed.
libstdc++6:i386 is already the newest version.
libstdc++6:i386 set to manually installed.
libx11-6:i386 is already the newest version.
libx11-6:i386 set to manually installed.
libxau6:i386 is already the newest version.
libxau6:i386 set to manually installed.
libxcb1:i386 is already the newest version.
libxdmcp6:i386 is already the newest version.
libxdmcp6:i386 set to manually installed.
libxext6:i386 is already the newest version.
libxext6:i386 set to manually installed.
zlib1g:i386 is already the newest version.
xdg-utils is already the newest version.
xdg-utils set to manually installed.
libc6:i386 is already the newest version.
libgtk2.0-0:i386 is already the newest version.
libgtk2.0-0:i386 set to manually installed.
libssl1.0.0:i386 is already the newest version.
libssl1.0.0:i386 set to manually installed.
libuuid1:i386 is already the newest version.
libuuid1:i386 set to manually installed.
The following extra packages will be installed:
libao4 libcanberra-gtk0:i386 libcanberra0:i386 libcue1 libreplaygain1
libtdb1:i386
Suggested packages:
libesd0 libesd-alsa0 libcanberra-pulse:i386
The following packages will be REMOVED:
lame:i386 vorbis-tools:i386
The following NEW packages will be installed:
lame lib32stdc++6 libao4 libcanberra-gtk-module:i386 libcanberra-gtk0:i386
libcanberra0:i386 libcue1 libreplaygain1 libtdb1:i386 musepack-tools
p11-kit-modules:i386 vorbis-tools
0 upgraded, 12 newly installed, 2 to remove and 0 not upgraded.
Need to get 743 kB of archives.
After this operation, 2,471 kB of additional disk space will be used.
Do you want to continue? [Y/n] y
Get:1 http://ubuntu.mirror.constant.com/ trusty/main libao4 amd64 1.1.0-2ubuntu2 [31.5 kB]
Get:2 http://ubuntu.mirror.constant.com/ trusty/main libtdb1 i386 1.2.12-1 [38.6 kB]
Get:3 http://ubuntu.mirror.constant.com/ trusty/main libcanberra0 i386 0.30-0ubuntu3 [35.0 kB]
Get:4 http://ubuntu.mirror.constant.com/ trusty/main libcanberra-gtk0 i386 0.30-0ubuntu3 [7,584 B]
Get:5 http://ubuntu.mirror.constant.com/ trusty/universe libreplaygain1 amd64 1.0~r475-1 [9,510 B]
Get:6 http://ubuntu.mirror.constant.com/ trusty/universe lame amd64 3.99.5+repack1-3ubuntu1 [48.5 kB]
Get:7 http://ubuntu.mirror.constant.com/ trusty/main libcanberra-gtk-module i386 0.30-0ubuntu3 [8,868 B]
Get:8 http://ubuntu.mirror.constant.com/ trusty/universe libcue1 amd64 1.4.0-1 [25.2 kB]
Get:9 http://ubuntu.mirror.constant.com/ trusty/universe musepack-tools amd64 2:0.1~r459-1ubuntu3 [82.8 kB]
Get:10 http://ubuntu.mirror.constant.com/ trusty/main vorbis-tools amd64 1.4.0-1ubuntu3 [129 kB]
Get:11 http://ubuntu.mirror.constant.com/ trusty/main lib32stdc++6 amd64 4.8.2-19ubuntu1 [261 kB]
Get:12 http://ubuntu.mirror.constant.com/ trusty/main p11-kit-modules i386 0.20.2-2ubuntu2 [66.1 kB]
Fetched 743 kB in 0s (950 kB/s)
(Reading database ... 219136 files and directories currently installed.)
Removing lame (3.99.5+repack1-3ubuntu1) ...
Removing vorbis-tools (1.4.0-1ubuntu3) ...
Processing triggers for man-db (2.6.7.1-1ubuntu1) ...
Processing triggers for mime-support (3.54ubuntu1.1) ...
Selecting previously unselected package libao4:amd64.
(Reading database ... 219112 files and directories currently installed.)
Preparing to unpack .../libao4_1.1.0-2ubuntu2_amd64.deb ...
Unpacking libao4:amd64 (1.1.0-2ubuntu2) ...
Selecting previously unselected package libtdb1:i386.
Preparing to unpack .../libtdb1_1.2.12-1_i386.deb ...
Unpacking libtdb1:i386 (1.2.12-1) ...
Selecting previously unselected package libcanberra0:i386.
Preparing to unpack .../libcanberra0_0.30-0ubuntu3_i386.deb ...
Unpacking libcanberra0:i386 (0.30-0ubuntu3) ...
Selecting previously unselected package libcanberra-gtk0:i386.
Preparing to unpack .../libcanberra-gtk0_0.30-0ubuntu3_i386.deb ...
Unpacking libcanberra-gtk0:i386 (0.30-0ubuntu3) ...
Selecting previously unselected package libreplaygain1:amd64.
Preparing to unpack .../libreplaygain1_1.0~r475-1_amd64.deb ...
Unpacking libreplaygain1:amd64 (1.0~r475-1) ...
Selecting previously unselected package lame.
Preparing to unpack .../lame_3.99.5+repack1-3ubuntu1_amd64.deb ...
Unpacking lame (3.99.5+repack1-3ubuntu1) ...
Selecting previously unselected package libcanberra-gtk-module:i386.
Preparing to unpack .../libcanberra-gtk-module_0.30-0ubuntu3_i386.deb ...
Unpacking libcanberra-gtk-module:i386 (0.30-0ubuntu3) ...
Selecting previously unselected package libcue1.
Preparing to unpack .../libcue1_1.4.0-1_amd64.deb ...
Unpacking libcue1 (1.4.0-1) ...
Selecting previously unselected package musepack-tools.
Preparing to unpack .../musepack-tools_2%3a0.1~r459-1ubuntu3_amd64.deb ...
Unpacking musepack-tools (2:0.1~r459-1ubuntu3) ...
Selecting previously unselected package vorbis-tools.
Preparing to unpack .../vorbis-tools_1.4.0-1ubuntu3_amd64.deb ...
Unpacking vorbis-tools (1.4.0-1ubuntu3) ...
Selecting previously unselected package lib32stdc++6.
Preparing to unpack .../lib32stdc++6_4.8.2-19ubuntu1_amd64.deb ...
Unpacking lib32stdc++6 (4.8.2-19ubuntu1) ...
Selecting previously unselected package p11-kit-modules:i386.
Preparing to unpack .../p11-kit-modules_0.20.2-2ubuntu2_i386.deb ...
Unpacking p11-kit-modules:i386 (0.20.2-2ubuntu2) ...
Processing triggers for man-db (2.6.7.1-1ubuntu1) ...
Processing triggers for mime-support (3.54ubuntu1.1) ...
Setting up libao4:amd64 (1.1.0-2ubuntu2) ...
Setting up libtdb1:i386 (1.2.12-1) ...
Setting up libcanberra0:i386 (0.30-0ubuntu3) ...
Setting up libcanberra-gtk0:i386 (0.30-0ubuntu3) ...
Setting up libreplaygain1:amd64 (1.0~r475-1) ...
Setting up lame (3.99.5+repack1-3ubuntu1) ...
Setting up libcanberra-gtk-module:i386 (0.30-0ubuntu3) ...
Setting up libcue1 (1.4.0-1) ...
Setting up musepack-tools (2:0.1~r459-1ubuntu3) ...
Setting up vorbis-tools (1.4.0-1ubuntu3) ...
Setting up lib32stdc++6 (4.8.2-19ubuntu1) ...
Setting up p11-kit-modules:i386 (0.20.2-2ubuntu2) ...
Processing triggers for libc-bin (2.19-0ubuntu6.6) ...
wellywu@IdeaPadY510P:~$ sudo ubuntu-tweak
compizconfig - Info: Backend : ini
compizconfig - Info: Integration : true
compizconfig - Info: Profile : default
TypeError: can't convert return value to desired type
/usr/bin/ubuntu-tweak:123: Warning: g_value_copy: assertion 'G_IS_VALUE (src_value)' failed
app.run(sys.argv)
/usr/bin/ubuntu-tweak:123: Warning: g_value_reset: assertion 'G_IS_VALUE (value)' failed
app.run(sys.argv)
/usr/bin/ubuntu-tweak:123: Warning: g_value_unset: assertion 'G_IS_VALUE (value)' failed
app.run(sys.argv)
wellywu@IdeaPadY510P:~$

Now, I have to test J River Media Center 20 64 bit. I'll do this later tonight or tomorrow. I didn't get any sleep last night because I was busy.

Awesome Donkey · « **Reply #90 on:** March 03, 2015, 05:28:19 pm »

There ya go, enjoy!

You should try running mediacenter20 from the Terminal first to see if you get any errors there. If there's no errors, run it normally.

wellywu · « **Reply #91 on:** March 03, 2015, 07:21:07 pm »

JRiver Media Center 20 64 bit GNU/Linux seems to be working right now. I'm playing Diana Krall's Quiet Nights FLAC music album at 16 bits 44.1 kHz. It has not crashed yet. However, I still can not select my Oppo Digital HA-1 DAC and headphone amplifier in the Tools -> Options -> Audio Device. I have to use the sound icon in Ubuntu Unity to select my Oppo Digital HA-1 in order to route music playback through JRiver Media Center 20 64 bit GNU/Linux. How do I fix this?

Here's my audiophile headphone system:
Oppo Digital HA-1 DAC & headphone amplifier
CEntrance HiFi-M8 LX XL4 portable DAC & headphone amplifier
Sennheiser HD-800
Shure SE-846 CL quad driver earphones

$4,400.00 USD

The sound quality sounds no different from DeadBeef, Clementine, etc. Right now, JRiver Media Center 20 64 bit GNU/Linux seems to be a bit buggy. It's nowhere near the Microsoft Windows 8.1 build. I understand that video and picture playback are not currently supported in the early GNU/Linux build, correct? What else do I need to know?

I may purchase this software product for my birthday next month. It seems to be a good investment and I strongly prefer JRiver Media Center for its advanced unique features and capabilities. The price is affordable.

Awesome Donkey · « **Reply #92 on:** March 03, 2015, 07:58:22 pm »

Okay...

Quote from: wellywu on March 03, 2015, 07:21:07 pm

However, I still can not select my Oppo Digital HA-1 DAC and headphone amplifier in the Tools -> Options -> Audio Device. I have to use the sound icon in Ubuntu Unity to select my Oppo Digital HA-1 in order to route music playback through JRiver Media Center 20 64 bit GNU/Linux. How do I fix this?

There's several things you can try here. First, open a Terminal and input the following for alsacap then post the results here;

Code: [Select]

/usr/lib/jriver/Media\ Center\ 20/alsacap
Second, you can try going through every device listed under Tools -> Options -> Audio Device until you find the correct one for your Oppo.

Quote from: wellywu on March 03, 2015, 07:21:07 pm

The sound quality sounds no different from DeadBeef, Clementine, etc.

And that's a bad thing?

Sound in MC is of the highest quality available in Linux (ALSA/PulseAudio).

Quote from: wellywu on March 03, 2015, 07:21:07 pm

Right now, JRiver Media Center 20 64 bit GNU/Linux seems to be a bit buggy.

It can be at times, but as anything it's a work-in-progress. I find it's pretty stable for me, but then again I use it as audio only (for now).

Quote from: wellywu on March 03, 2015, 07:21:07 pm

It's nowhere near the Microsoft Windows 8.1 build.

Nope, Linux is a completely different beast compared to Windows (or Mac) which required a lot of work porting from Windows to Linux and Mac.

Quote from: wellywu on March 03, 2015, 07:21:07 pm

I understand that video and picture playback are not currently supported in the early GNU/Linux build, correct?

Video support has been added, but keep in mind it doesn't work the same as the Windows version so there may be functionality missing (e.g. theater view). Again, another work-in-progress. I believe they're working on image support, not sure though. I also think they're working on theater view for Linux and Mac.

Quote from: wellywu on March 03, 2015, 07:21:07 pm

What else do I need to know?

Best advice is to keep track of the changelogs for new builds as they come. They add new features at random.

85Duppie · « **Reply #93 on:** March 03, 2015, 11:18:48 pm »

Quote from: bob on February 27, 2015, 03:24:03 pm

Turn on logging under help. The log is in the users home directory under
.jriver/Media Center 20/Log.txt

On my system it never crashes so I suspect you have an issue with the distro and architecture you are using or perhaps a hardware issue.

The distro supported by JRiver is Debian Wheezy i386.

I sent you a log from my laptop earlier today.

I was able to get 2 logs off my old tower computer. My experience today was that it could play for a couple of hours running some FLAC files at 44/16. When I loaded a 192/24 file, it started to play, then crashed when I attempted to switch tracks. The second time I attempted to reload the 192/24 file, it crashed again. It's now running a 44/16 file and running fine.

Please let me know anything you can gain from these logs.

bob · « **Reply #94 on:** March 04, 2015, 12:25:48 am »

Quote from: 85Duppie on March 03, 2015, 11:18:48 pm

I sent you a log from my laptop earlier today.

I was able to get 2 logs off my old tower computer. My experience today was that it could play for a couple of hours running some FLAC files at 44/16. When I loaded a 192/24 file, it started to play, then crashed when I attempted to switch tracks. The second time I attempted to reload the 192/24 file, it crashed again. It's now running a 44/16 file and running fine.

Please let me know anything you can gain from these logs.

Your output device in the MC audio configuration is???

percy · « **Reply #95 on:** March 04, 2015, 10:45:06 am »

I wanted to install a multi room audio system and wanted to give JRiver a try.
I have succeeded to install JRiver 20.0.74 on an old PC (Q6600 / 4G Ram 128 GB SSD) with two sound cards (one Intel HDA and one Xonar ST/H6 ) on Ubuntu 14.04.2 LTS 64-bit without to much problems
I created a permanent mounted network connections to my music servers (one Ubuntu 14.04 and one Windows 7) and created three libraries (one on the local disk and the others on the mounted network drives (which actually shouldn't make any difference) and al that went fine too.
Was able to create 10 zones (3 stereo + 2 mono zones on Xonar + 3 stereo + 2 mono zones on the Intel)
Everything seems to work as expected I can link zones within and across the two sound cards and all that seems to work as well.
Even streaming to my PS-Audio DirectStream DAC seems to work (With the exception of the DSD format I still have to look into that), and even the rubbish Onkyo TX-NR717 (they all seem somehow to die just after the warranty expires) it seem to work flawlessly.
For the time being there are I seem sometimes to lose the playlists I created with my internet radio URL's (By the way you cannot copy/paste into the "File/Open URL/Open Streaming File" Drop down field which is very unfortunate. Luckily it keeps the old entries in the drop down list).
And there are the random crashes of MC20. It sometimes just disappears. By the way it would be nice, to be able to have the (huge) log files on a configurable path (as my SSD is only 128GB) so that I can write it on the HDD (on which he local music files are stored too)
I do not know if enabling the log file would be helpful I will give it a try.
Taking into account that this is an under development system its fairly stable I must say (I have seen much worse in my 35 Years as system software developer.
And also, I know, it should be on a Debian Wheezy 32-bit distro and not on a Ubuntu 64 bit, but the Ubuntu is the most widely use distro by far so for commercial reasons (as this is a paid for package) it would preferable if it would also be fully supported on Ubuntu.

85Duppie · « **Reply #96 on:** March 04, 2015, 12:15:59 pm »

Quote from: bob on March 04, 2015, 12:25:48 am

Your output device in the MC audio configuration is???

If I understand your question, MC configuration was set using the toolbar as follows: Tools>Options>Media Network>Add or configure DLNA Servers. The settings on that screen are:

Audiophile 24-bit DAC
Mode: Specified output format
Format: PCM 24 Bit
Under Advanced, Stereo downmix is checked.
Sample Rate: Same as Source

The window from DSP studio has no output encoding and Channels shows Source number of channels.

The output is going over my network to a JRiver id. On the id, the only change was to set the output to USB. It has a power supply, Cat 6 network cable, and a USB that connects to a PS Audio DirectStream DAC.

I just received the id on Feb 20. Is the software on it registered before shipping, or do I need to do that? I did not receive a code, so I assumed it was registered.

85Duppie · « **Reply #97 on:** March 04, 2015, 12:31:46 pm »

Quote from: bob on March 04, 2015, 12:25:48 am

Your output device in the MC audio configuration is???

I neglected to mention on my last post that I am running MC 20.0.70. As I am posting, I have a 96/24 FLAC file running and it plays fine, just as well as a 44/16.

85Duppie · « **Reply #98 on:** March 04, 2015, 12:40:25 pm »

Quote from: percy on March 04, 2015, 10:45:06 am

I wanted to install a multi room audio system and wanted to give JRiver a try.
I have succeeded to install JRiver 20.0.74 on an old PC (Q6600 / 4G Ram 128 GB SSD) with two sound cards (one Intel HDA and one Xonar ST/H6 ) on Ubuntu 14.04.2 LTS 64-bit without to much problems
I created a permanent mounted network connections to my music servers (one Ubuntu 14.04 and one Windows 7) and created three libraries (one on the local disk and the others on the mounted network drives (which actually shouldn't make any difference) and al that went fine too.
Was able to create 10 zones (3 stereo + 2 mono zones on Xonar + 3 stereo + 2 mono zones on the Intel)
Everything seems to work as expected I can link zones within and across the two sound cards and all that seems to work as well.
Even streaming to my PS-Audio DirectStream DAC seems to work (With the exception of the DSD format I still have to look into that), and even the rubbish Onkyo TX-NR717 (they all seem somehow to die just after the warranty expires) it seem to work flawlessly.
For the time being there are I seem sometimes to lose the playlists I created with my internet radio URL's (By the way you cannot copy/paste into the "File/Open URL/Open Streaming File" Drop down field which is very unfortunate. Luckily it keeps the old entries in the drop down list).
And there are the random crashes of MC20. It sometimes just disappears. By the way it would be nice, to be able to have the (huge) log files on a configurable path (as my SSD is only 128GB) so that I can write it on the HDD (on which he local music files are stored too)
I do not know if enabling the log file would be helpful I will give it a try.
Taking into account that this is an under development system its fairly stable I must say (I have seen much worse in my 35 Years as system software developer.
And also, I know, it should be on a Debian Wheezy 32-bit distro and not on a Ubuntu 64 bit, but the Ubuntu is the most widely use distro by far so for commercial reasons (as this is a paid for package) it would preferable if it would also be fully supported on Ubuntu.

Greetings Percy.

I also have a PS Audio DirectStream DAC. It's a really great DAC, and will be even better when they perfect the Bridge. I've been waiting for 4 1/2 years.
I am also experiencing MC 20 crashes, and have sent some logs. I would encourage you to also send logs as it could help them make improvements.
Mine runs with Ubuntu 14.04 LTS.

bob · « **Reply #99 on:** March 04, 2015, 01:23:34 pm »

Quote from: 85Duppie on March 04, 2015, 12:15:59 pm

If I understand your question, MC configuration was set using the toolbar as follows: Tools>Options>Media Network>Add or configure DLNA Servers. The settings on that screen are:

Audiophile 24-bit DAC
Mode: Specified output format
Format: PCM 24 Bit
Under Advanced, Stereo downmix is checked.
Sample Rate: Same as Source

The window from DSP studio has no output encoding and Channels shows Source number of channels.

The output is going over my network to a JRiver id. On the id, the only change was to set the output to USB. It has a power supply, Cat 6 network cable, and a USB that connects to a PS Audio DirectStream DAC.

I just received the id on Feb 20. Is the software on it registered before shipping, or do I need to do that? I did not receive a code, so I assumed it was registered.

Actually I was asking about the settings in MC where the audio output device is connected, in this case, the Id.

If the Id is your only or primary output device I would change the DLNA server settings to use original format. With very few exceptions, the Id can play anything that the MC server PC can play. The output format settings are designed to deal with the usual DLNA devices that play a small fraction of the formats supported by the Id.
If there are limitations with the output device on the Id as far as sample rates and number of channels are concerned you should use the DSP settings on the Id to handle that.

INTERACT FORUM

Author Topic: Setup JRiver Media Center 20 In Ubuntu/Linux Mint (Read 133949 times)