Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Paul S.A. Renaud]

My setup is Macbook Pro, JRiver 19 for MAC and a Meridian Explorer. My issue is that JRiver downsamples 192Hz/24bit files automatically to 96Hz/24bit. The Meridian Explorer is capable of handling 192. In my system settings on MAC I configure the meridian explorer as 192Hz. But it automatically downsamples to 96K. What do I do wrong in the settings?

[lobo85]

It may be able to handle the input but according to this page https://www.meridian-audio.com/en/collections/products/explorer-1000/4/specification/ it down samples 192 kHz or 176.4 kHz to 96 kHz or 88.2 kHz when outputting audio through S/PDIF.

[Paul S.A. Renaud]

The issue is not with S/PDIF. When I use the VLC Player 192 native files are played as 192 (three lights are on on the Meridian Explorer. When I use the JRiver MC19 the sound is downsampled to 96 (and thus only two lights are on the Meridian Explorer). The issue is clearly with JRiver

[lobo85]

In DSP studio there is an output section in that section there is a subsection called sample rate. Have you set all desired input sample rates to output at 192,000 Hz? If not that could be your problem as if I remember correctly by default JRiver has these capped at 96,000 Hz.

[Paul S.A. Renaud]

Thanks. That solved the problem. Default setting of JRiver is to downsample 192 to 96. I was not clear to me you could change that. But now I did and it works perfectly

[lobo85]

Glad to Help!