INTERACT FORUM

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: Meridian Explorer 192 output  (Read 3079 times)

Paul S.A. Renaud

  • World Citizen
  • ***
  • Posts: 218
Meridian Explorer 192 output
« on: February 25, 2014, 01:19:15 pm »

My setup is Macbook Pro, JRiver 19 for MAC and a Meridian Explorer. My issue is that JRiver downsamples 192Hz/24bit files automatically to 96Hz/24bit. The Meridian Explorer is capable of handling 192. In my system settings on MAC I configure the meridian explorer as 192Hz. But it automatically downsamples to 96K. What do I do wrong in the settings?
Logged

lobo85

  • World Citizen
  • ***
  • Posts: 145
Re: Meridian Explorer 192 output
« Reply #1 on: February 25, 2014, 08:04:03 pm »

It may be able to handle the input but according to this page https://www.meridian-audio.com/en/collections/products/explorer-1000/4/specification/ it down samples 192 kHz or 176.4 kHz to 96 kHz or 88.2 kHz when outputting audio through S/PDIF.
Logged

Paul S.A. Renaud

  • World Citizen
  • ***
  • Posts: 218
Re: Meridian Explorer 192 output
« Reply #2 on: March 02, 2014, 02:46:21 am »

The issue is not with S/PDIF. When I use the VLC Player 192 native files are played as 192 (three lights are on on the Meridian Explorer. When I use the JRiver MC19 the sound is downsampled to 96 (and thus only two lights are on the Meridian Explorer). The issue is clearly with JRiver
Logged

lobo85

  • World Citizen
  • ***
  • Posts: 145
Re: Meridian Explorer 192 output
« Reply #3 on: March 03, 2014, 05:04:27 pm »

In DSP studio there is an output section in that section there is a subsection called sample rate. Have you set all desired input sample rates to output at 192,000 Hz? If not that could be your problem as if I remember correctly by default JRiver has these capped at 96,000 Hz.
Logged

Paul S.A. Renaud

  • World Citizen
  • ***
  • Posts: 218
Re: Meridian Explorer 192 output
« Reply #4 on: March 05, 2014, 03:26:43 am »

Thanks. That solved the problem. Default setting of JRiver is to downsample 192 to 96. I was not clear to me you could change that. But now I did and it works perfectly
Logged

lobo85

  • World Citizen
  • ***
  • Posts: 145
Re: Meridian Explorer 192 output
« Reply #5 on: March 05, 2014, 03:54:13 am »

Glad to Help! ;D
Logged
Pages: [1]   Go Up