Hi there - I am very new to J River 24 hours. But I am not new to computing and DLNA in general having used Windows Media Centre since XP. (So don't panic
)
I currently employ the Silicon Dust HD Homerun DBV-T dual tuner dedicated hardware tuner. It's 99% faultless recording my TV content.
To do this, I run a dedicated Intel Atom using Win7 Media Centre (Win8/8.1 was a straight port from Win7 and wasn't so hot.)
Playback is usually on a TV via DLNA or PC as opposed to involving another (DLNA contrller or possibly software) rendering device.
The reason for this post is that J River can't seem to find any channels from the Tuners it detects in my system.
Repeated channel scans return nothing - zip.
Here's the list of devices J River sees in the system.
KSCATEGORY_BDA_NETWORK_TUNER filters
Silicondust HDHomeRun Tuner 1210ADE9-0
@device:sw:{71985F48-1CA1-11D3-9CC8-00C04F7971E0}\Silicondust HDHomeRun Tuner 1210ADE9-0
Input Pin 'Input0'
Output Pin 'Output1'
Silicondust HDHomeRun Tuner 1210ADE9-1
@device:sw:{71985F48-1CA1-11D3-9CC8-00C04F7971E0}\Silicondust HDHomeRun Tuner 1210ADE9-1
Input Pin 'Input0'
Output Pin 'Output1'
KSCATEGORY_BDA_RECEIVER_COMPONENT filters
Silicondust HDHomeRun Tuner 1210ADE9-0
@device:sw:{FD0A5AF4-B41D-11D2-9C95-00C04F7971E0}\Silicondust HDHomeRun Tuner 1210ADE9-0
Input Pin 'Input0'
Output Pin 'Output1'
Silicondust HDHomeRun Tuner 1210ADE9-1
@device:sw:{FD0A5AF4-B41D-11D2-9C95-00C04F7971E0}\Silicondust HDHomeRun Tuner 1210ADE9-1
Input Pin 'Input0'
Output Pin 'Output1'
AM_KSCATEGORY_CAPTURE filters
Microsoft LifeCam VX-3000.
@device:pnp:\\?\usb#vid_045e&pid_00f5&mi_01#7&165056ab&0&0001#{65e8773d-8f56-11d0-a3b9-00a0c9223196}\global
Output Pin 'Capture'
Input Pin 'Microphone'
Microsoft LifeCam VX-3000
@device:pnp:\\?\usb#vid_045e&pid_00f5&mi_00#7&165056ab&0&0000#{65e8773d-8f56-11d0-a3b9-00a0c9223196}\global
Output Pin 'Capture'
KSCATEGORY_ENCODER filters
KSCATEGORY_MULTIPLEXER filters
AM_KSCATEGORY_CROSSBAR filters
AM_KSCATEGORY_TVTUNER filters
AM_KSCATEGORY_TVAUDIO filters
AM_KSCATEGORY_VBICODEC filters
MPEG2 Multiplexer filters
If I click on SHOW STATUS when the scan is "in flight" it shows the following information:
=== Television Devices ===
Device 0: Silicondust HDHomeRun Tuner 1210ADE9-0 (digital)
State: Scanning
Channel:
Recording Rule IDs:
Tuner Type: DVB-T
Device 1: Silicondust HDHomeRun Tuner 1210ADE9-1 (digital)
State: Idle
Device 2: Microsoft LifeCam VX-3000 (analog)
State: Idle
=== Actions ===
If I look at the HD Homerun Box one light is on (Power) and both the other lights are blinking on and off. (Tunner communication).
I enabled loging within J River and then performed the scan opperation once more.
Here is a link to the recorded LOG.TXT - created during the channel scan (failures).
http://1drv.ms/1gyynUX From my lay persons view the log seems to show that J River is expecting a channel lock and one is not being acquired.
More information.
I can watch Live TV - no problem - on the same computer where this is happening using either MCE or Quick TV (Silicone Dust TV Viewer).
I have reset the HD Homerun Box to ensure there were no lingering connections locking it's Tuners.
Also rebooted the local PC.
Firmware Version is (which I undated today) 20140121 (Current Latest) - but this has not changed the status of this issue.
Negative channels.
P.S.
The EPG is being downloaded to the temporary directory successfully and looks fine.
I mention this because when MCE is set up it always wants the EPG before the channel list - you guys may do it the other way - I can't tell from the info I have read so far.
I am overally very impressed with JRiver and hope to ditch these two products and replace them with J River.
Serviio
Windows Media Center
(Also iTunes for audio)
I already posted in media network about how I customised the TV rendering settings to support AVC_HD without transcoding - a format that I will ultiamtely send J River recorded content to the TV's.
Looking forward to getting this working as it should do.
Thanks in advance for the time spent.