Topic: Problems with my remote control (Hauppauge 350) (Read 6541 times)

ferent · « **on:** November 21, 2005, 03:10:09 am »

Hi;

MC doesn´t detect my remote control. I go to options -> Remotecontrol -> and clic on Start but MC sais doesn´t find a remote control. The software that comes with Hauppauge recognise it with no problem. I download all the MC remotecontrols plugins and clic on Start but it´s imposible.

I have a Hauppauge 350.

Could you help me?

benvisser · « **Reply #1 on:** November 21, 2005, 01:17:28 pm »

got to http://yabb.jriver.com/interact/index.php?topic=27562

Perhaps it wil help a little bit

ferent · « **Reply #2 on:** November 22, 2005, 02:46:51 am »

Thanks benvisser;

I think my problem is different. After make a lot of test, I can connect my WinTv 350 with MC, but MC doesn´t "learn" the asociated buttons of my remote control. I clic on learning an later clic on any button but nothing...

If I stop the plugin in the same windows and later clic on Start, MC shows me a COM error. I thought the problem was I haven´t got any Windows service started but I started all my windows services and no luck...

I have the last drivers of Wintv 350.

benvisser · « **Reply #3 on:** November 22, 2005, 05:54:52 am »

As I read your comment I think you have a remote control from Hauppauge that was delivered together with the TV Card.

If so, then do you have started the IR remote control software from Hauppauge?

ferent · « **Reply #4 on:** November 22, 2005, 06:49:55 am »

Yes, of course. Like I said in the first post:

Quote

The software that comes with Hauppauge recognise it with no problem.

JimH · « **Reply #5 on:** November 22, 2005, 07:01:26 am »

The remote plug-ins are specific to the receiver, not the remote itself. The Hauppauge receiver isn't supported. You would need to have a receiver that is supported. Then you could probably make most any remote work by using the "learn" process.

benvisser · « **Reply #6 on:** November 22, 2005, 10:18:46 am »

I have Hauppauge 250 PCI TV card, and allso with that a remote control from Hauppauge.
The remote control works fine with MC.

There must be something wrong.

ferent · « **Reply #7 on:** November 22, 2005, 10:44:13 am »

Quote

There must be something wrong.

I think there are problems with my services, like I said...
All the plugins said to me Windows denied the access...

Thanks benvisser.

benvisser · « **Reply #8 on:** November 22, 2005, 12:35:48 pm »

I think it is not the plugins.

I have no plugins at all started, but the remote control works fine anyway.
I don't think that's the problem.

I have a x10 Hardware compatible remote control in the living room, and it is not working allso. But the RC from Hauppauge is working just fine.

Perhaps a stupid question (like allways) But is your RC working on WINTV2000?

Ben.

ferent · « **Reply #9 on:** November 22, 2005, 01:11:48 pm »

Yes, of course, like I said:

Quote

The software that comes with Hauppauge recognise it with no problem.

It includes wintv2000

This night I will screen-capture all the error alert and tomorrow I will post here.

ferent · « **Reply #10 on:** November 23, 2005, 02:57:58 am »

Here you have a video-capture that shows the remote problems.
IMPORTANT: Now, If I clic PLAY/STOP/PREVIUS/NEXT on my remote control, MC make this actions, but MC doesn´t learn the other options, like left/right/up...

(right buttom -> dowload) http://demodirecti.aclass.es/aclass/video.avi 13 MB

Thanks in advance

ferent · « **Reply #11 on:** November 23, 2005, 11:14:24 am »

Nobody can help me??

benvisser · « **Reply #12 on:** November 23, 2005, 12:34:16 pm »

Good evening Ferent,

I thought your RC did nothing on MC. I have a RC that works fine for me Like Louder/Play/Pause/Stop/skip etc.

I have no buttons like right/left or anything that works like a mouse.

Stupid thing is that in the living room I have a RC that works fine with left/right etc. but it doesn't work with MC. It has no functions like play/pause/louder etc.

If it is a X10 compatible RC you can try downloads on http://www.promixis.com/

There is this program Girder as well as Netremote that is supported by MC.

Or perhaps download Mouseremote on http://www.marmitek.com/ Open Home solutions then touch top button (Sorry it is in Dutch) Universele Afstandbedieningen.
Lookup for PC Control and click on the picture. then click on software and click on the second text "DOWNLOADEN"

There should be download MOUSEREMOTE.exe

Good luck,

Ben.

ferent · « **Reply #13 on:** November 24, 2005, 04:08:44 am »

Yesterday night I installed NetRemote, and when I executed it an alert shows me the next text:

I clic ok and a new alert shows:

benvisser · « **Reply #14 on:** November 25, 2005, 12:54:45 pm »

Hello Ferent,

Sorry I react so late, but I was unable to be earlier on the internet.

I think this problem is going too far for me.
It is time to make contact to the people from MC. They can help you further I'm sure.

It is best to make contact with Bob, Kingsparta or Bob.
If they are online perhaps send them a personal message.

Ben.

JimH · « **Reply #15 on:** November 25, 2005, 12:57:03 pm »

KingSparta is a moderator here but not from JRiver.

But you are talking to JRiver here.

MC doesn't support the Hauppauge remote, but you may be able to get it to work.

benvisser · « **Reply #16 on:** November 25, 2005, 01:03:31 pm »

Hello Jim,

Can you see what's wrong looking at the error messages above?

Ben.

JimH · « **Reply #17 on:** November 25, 2005, 03:58:25 pm »

Check the promixis.com site and their forum for setup info on NetRemote.

ferent · « **Reply #18 on:** November 28, 2005, 03:10:16 am »

Hi JimH;

In help archive, I can read:

Quote

The following cards are supported:

· ATI (http://www.ati.com)

· ATI ALL-IN-WONDER cards

· ATI TV Wonder cards, TV Wonder VE, TV Wonder USB

· ATI HDTV Wonder cards

· Hauppauge (http://www.hauppauge.com/)

· WinTV PCI or USB

· WinTV-PVR 150/250/350 (except for digital TV models)

but I can´t read and * that alert to us the card´s remote control are not supported. I bought the Hauppauge because I think ALL the features are supported, and not only ONE.

brainsoup · « **Reply #19 on:** December 04, 2005, 05:03:34 pm »

Hi, I have a Hauppage TV card and have got most of the remote functions working by modifying the remote.ini file in the C:/Windows directory. I will post up what I have done in the morning but am just off to bed!!

benvisser · « **Reply #20 on:** December 05, 2005, 04:31:32 pm »

I don't have a remote.ini file in c:\windows and I allso have a Hauppauge TV card (PCI 250)

Ben

Griff · « **Reply #21 on:** December 07, 2005, 01:38:56 pm »

I believe he meant Irremote.ini.

This sites info may look old, but it was updated 8/2005.

Download the irremote.ini doc. file, in first post, at bot.

It will show you how to set it up.

http://forums.sage.tv/forums/showthread.php?t=4277

Keyboards com. can be found in MC help file or in the menus at the top of MC std. view.

Hope this helps.

ferent · « **Reply #22 on:** December 12, 2005, 02:37:14 am »

I finally use Girder with the plugin "hauppauge" there are in girder´s web. It works fine!!

Thanks for the replies!!

INTERACT FORUM

Author Topic: Problems with my remote control (Hauppauge 350) (Read 6541 times)