INTERACT FORUM

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: Font change not saved  (Read 5051 times)

Guuz

  • Recent member
  • *
  • Posts: 8
Font change not saved
« on: August 18, 2017, 05:21:34 am »

When I change the font and/or font size, this is not saved.
So every time you startup, you have to change it again?
Logged

OldSouthernGuy

  • Member
  • *
  • Posts: 4
Re: Font change not saved
« Reply #1 on: August 24, 2017, 02:04:08 pm »

When I change the font and/or font size, this is not saved.
So every time you startup, you have to change it again?
Any progress on this?  I'm having the same issue and finding it quite frustrating, since the default font is far too small on my monitor.
Logged

blgentry

  • Regular Member
  • Citizen of the Universe
  • *****
  • Posts: 8009
Re: Font change not saved
« Reply #2 on: August 24, 2017, 02:31:01 pm »

I've been using MC for Mac since V20 and have used almost every version since then.  MC23 keeps my font selection.  I'll double check this when I get home, as I haven't changed font faces or sizes since MC22.

I'd like to insure something about your setups though.  Are both of you running MC23 from the Applications folder?  Or are you running from the mounted installation file (DMG) ?

It will be a few hours, but I will report after I can test.

Brian.
Logged

blgentry

  • Regular Member
  • Citizen of the Universe
  • *****
  • Posts: 8009
Re: Font change not saved
« Reply #3 on: August 24, 2017, 05:38:44 pm »

I've just changed font size and font face 4 or 5 times.  I quit MC after the change, then restarted it.  The font follows the changes I make.  It stays on the last font and font size I set it to.

So, at least with my installation, this is working as expected.

Brian.
Logged

OldSouthernGuy

  • Member
  • *
  • Posts: 4
Re: Font change not saved
« Reply #4 on: August 24, 2017, 08:28:27 pm »

I've been using MC for Mac since V20 and have used almost every version since then.  MC23 keeps my font selection.  I'll double check this when I get home, as I haven't changed font faces or sizes since MC22.

I'd like to insure something about your setups though.  Are both of you running MC23 from the Applications folder?  Or are you running from the mounted installation file (DMG) ?

It will be a few hours, but I will report after I can test.

Brian.

I have two systems running MC23.  On one, the font change works just fine.  On the other, when I change the font family, it sticks but when I change the font face, it does not.  In both cases, I am running from the Applications folder.  Interestingly, the system on which the change works is running a High Sierra beta. 

I'm changing the font by selecting Tools, Options, Tree & View, and Select Font. 

UPDATE: I changed the font on the system that did not work to a different font size and it seems okay now.  No idea why. 
Logged

blgentry

  • Regular Member
  • Citizen of the Universe
  • *****
  • Posts: 8009
Re: Font change not saved
« Reply #5 on: August 25, 2017, 06:03:01 am »

Weird.  Glad it's now working for you.  :)

Brian.
Logged

Branko

  • Member
  • *
  • Posts: 1
Re: Font change not saved
« Reply #6 on: September 14, 2017, 11:40:36 pm »

I still have problems with changing fonts: JRiver don't save changes in script from "western" to "cyrillic", font is "Calibri" size 11. I tried with "Arial" - the same. What to do?
Logged

cdarsch

  • Recent member
  • *
  • Posts: 23
Re: Font change not saved
« Reply #7 on: February 03, 2018, 04:01:01 pm »

I'm having this problem as well, on High Sierra (10.13.2). I have my view size set to 125%, no retina. MC 23.0.90 remembers the typeface but not the size. It always reverts to 11 which is unusable on my 3440x1440 monitor.
Logged

aliciaviola

  • Galactic Citizen
  • ****
  • Posts: 389
Re: Font change not saved
« Reply #8 on: February 09, 2018, 01:27:42 am »

Same with me. As I already posted under another (own) thread a long time ago, MC on every restart remembers the font but sets the font size to an absolute minimum that's unreadable on my Mac Pro (resolution 1600x900 60 hz).
Appended  are two screenshots and the last log report.
All went well when I began using MC but six or seven builds ago this issue began.
It would be wonderful if there one day anyone could solve the problem.

Frank
Logged

JimH

  • Administrator
  • Citizen of the Universe
  • *****
  • Posts: 71211
  • where the buffalo roam
Re: Font change not saved
« Reply #9 on: February 09, 2018, 06:44:14 am »

Please try 23.0.100, available at the top of the MC for Mac board.
Logged

aliciaviola

  • Galactic Citizen
  • ****
  • Posts: 389
Re: Font change not saved
« Reply #10 on: February 11, 2018, 08:03:33 am »

Regrettably even this newest build doesn't solve the problem.

Frank
Logged

ugee

  • Guest
Re: Font change not saved
« Reply #11 on: February 11, 2018, 10:39:16 am »

Maybe you could try this (I've only tested it with "Retina" checked):
  • Set > View > Size > 100%
  • Set > Options > Tree & View > Font > Your desired font & font size
  • Save and Exit MC
  • Reopen MC ... did the font size stick this time?
  • If so: now you can change View > Size > xxx %
It seems like if you have anything else than 100% set for view size it's not possible to save font size changes. Somehow.
Logged

Awesome Donkey

  • Administrator
  • Citizen of the Universe
  • *****
  • Posts: 7319
  • The color of Spring...
Re: Font change not saved
« Reply #12 on: February 11, 2018, 11:27:15 am »

Font changes stick for me, so not sure what could be going on here.

Which font(s) are you trying to change to? Does it work if you select another font or fonts?
Logged
I don't work for JRiver... I help keep the forums safe from Viagra and other sources of sketchy pharmaceuticals.

Windows 11 2023 Update (23H2) 64-bit + Ubuntu 23.10 Mantic Minotaur 64-bit | Windows 11 2023 Update (23H2) 64-bit (Intel N305 Fanless NUC 16GB RAM/256GB NVMe SSD)
JRiver Media Center 32 (Windows + Linux) | Topping D50s DAC

ugee

  • Guest
Re: Font change not saved
« Reply #13 on: February 11, 2018, 11:35:24 am »

Font changes stick for me, so not sure what could be going on here.

Which font(s) are you trying to change to? Does it work if you select another font or fonts?

Just out of curiosity: have you tried changing the font size while view is set to anything else than 100%? Do the changes stick after restarting MC?
Logged

aliciaviola

  • Galactic Citizen
  • ****
  • Posts: 389
Re: Font change not saved
« Reply #14 on: February 12, 2018, 03:42:21 am »

ugee's advice did it. Setting view - size to 100% solved the problem.
After a reboot MC retains the  previously set letter size.

Thanks!
Logged

Awesome Donkey

  • Administrator
  • Citizen of the Universe
  • *****
  • Posts: 7319
  • The color of Spring...
Re: Font change not saved
« Reply #15 on: February 12, 2018, 03:58:01 am »

Wait, so the key to reproducing this issue is having a skin size set to anything besides 100% and then attempting to change the font size? Interesting, I'll give it a go when I have some time.
Logged
I don't work for JRiver... I help keep the forums safe from Viagra and other sources of sketchy pharmaceuticals.

Windows 11 2023 Update (23H2) 64-bit + Ubuntu 23.10 Mantic Minotaur 64-bit | Windows 11 2023 Update (23H2) 64-bit (Intel N305 Fanless NUC 16GB RAM/256GB NVMe SSD)
JRiver Media Center 32 (Windows + Linux) | Topping D50s DAC

cdarsch

  • Recent member
  • *
  • Posts: 23
Re: Font change not saved
« Reply #16 on: March 06, 2018, 04:53:50 pm »

Changing font size only when view size is set to 100% worked for me as well.
Logged

JohnT

  • Citizen of the Universe
  • *****
  • Posts: 4627
Re: Font change not saved
« Reply #17 on: September 19, 2018, 01:27:34 pm »

Please try build 24.0.53 to be posted shortly.  This should fix these problems (hopefully!).
Logged
John Thompson, JRiver Media Center
Pages: [1]   Go Up