INTERACT FORUM

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: Issues with 5.1 SACD  (Read 1403 times)

PhDSM

  • Regular Member
  • World Citizen
  • ***
  • Posts: 193
Issues with 5.1 SACD
« on: January 03, 2018, 03:25:36 am »
Hello,

I've loaded several SACD and DTS files to play them on 5.1 audio system.
Most of them play correctly but for some unknown reason some files produce the following message  :
 
"Playback could not be started using the format: 48 khz 16bit 5ch.
This format would work: 48khz 16bits 2ch   ............."

This seems to occur with files in 5CH despite the format, bitdepth or khz
why 4CH or 6CH plays ok and 5CH ask to be converted in 2Ch ?

Regards

Phil
Logged

JimH

  • Administrator
  • Citizen of the Universe
  • *****
  • Posts: 72439
  • Where did I put my teeth?
Re: Issues with 5.1 SACD
« Reply #1 on: January 03, 2018, 05:24:47 am »
Logged

Fitzcaraldo215

  • World Citizen
  • ***
  • Posts: 217
Re: Issues with 5.1 SACD
« Reply #2 on: January 03, 2018, 11:30:36 am »
Quote from: PhDSM on January 03, 2018, 03:25:36 am
Hello,

I've loaded several SACD and DTS files to play them on 5.1 audio system.
Most of them play correctly but for some unknown reason some files produce the following message  :
 
"Playback could not be started using the format: 48 khz 16bit 5ch.
This format would work: 48khz 16bits 2ch   ............."

This seems to occur with files in 5CH despite the format, bitdepth or khz
why 4CH or 6CH plays ok and 5CH ask to be converted in 2Ch ?

Regards

Phil

Not sure exactly what might cause it on your system.

Are you using HDMI, USB or a sound card?  HDMI used to give me trouble and a similar message due to handshake issues.  I now use USB.  No problems.

Another thing that has frequently come up is using Source Number of Channels as your output parameter in DSP Studio.  Use 5.1 instead.  Not sure why that would cause the error message, but it does cause channel misassigments between 5.0 and 5.1 SACDs.
Logged

fitbrit

  • MC Beta Team
  • Citizen of the Universe
  • *****
  • Posts: 4887
Re: Issues with 5.1 SACD
« Reply #3 on: January 04, 2018, 12:15:45 am »
Quote from: Fitzcaraldo215 on January 03, 2018, 11:30:36 am
Another thing that has frequently come up is using Source Number of Channels as your output parameter in DSP Studio.  Use 5.1 instead.  Not sure why that would cause the error message, but it does cause channel misassigments between 5.0 and 5.1 SACDs.

DItto. I think this is the culprit. For some reason 5.0 cannot be played with "source number of channels".
Logged

PhDSM

  • Regular Member
  • World Citizen
  • ***
  • Posts: 193
Re: Issues with 5.1 SACD
« Reply #4 on: January 04, 2018, 09:48:42 am »
Quote
DItto. I think this is the culprit. For some reason 5.0 cannot be played with "source number of channels".

I think fitbrit is right. MC fails to play 5.0 files when channels is set to "source number of channels".

I tried to convert my SACD 5.0 with convert format and DSP set to force 5.1 channel, then the converted file plays correctly.
In term of config I have 5.1 receiver connected thru HDMI.

Also on the same subject as I mentioned in another thread MC fails to report correctly the number of channel on dts wav files. Even if it plays them in 6ch, it still report them inthe db as 2ch files
Logged
Pages: [1]   Go Up
« previous next »