Topic: Cloudplay over UPnP (Read 2880 times)

Bro · « **on:** April 17, 2022, 08:43:40 am »

When I start any Cloudplay playlist streaming from my laptop via upnp to upnp device (Volumio Primo) it starts playing BUT after first track is over it doesn't go to next track. Time counter on top is still running but it still shows title of first track.

NOTE: When playing Cloudplay playlists on my laptop locally it goes to the next track normally.

JimH · « **Reply #1 on:** April 17, 2022, 09:18:54 am »

Quote from: Bro on April 17, 2022, 08:43:40 am

When I start any Cloudplay playlist streaming from my laptop via upnp to upnp device (Volumio Primo) it starts playing BUT after first track is over it doesn't go to next track. Time counter on top is still running but it still shows title of first track.

NOTE: When playing Cloudplay playlists on my laptop locally it goes to the next track normally.

That's probably a problem with the Renderer. Try changing SetNextAVTransport in the settings on the server.

I'll move this to a new thread.

Bro · « **Reply #2 on:** April 18, 2022, 02:43:32 pm »

Thanks for fast reply JimH! I tried your advice but its not working

I put flag on option "Disable SetNext Support":

Maybe some other advice?

And Happy Easter!

JimH · « **Reply #3 on:** April 18, 2022, 05:14:17 pm »

Did you try the other settings there?

Bro · « **Reply #4 on:** April 19, 2022, 04:21:35 pm »

Quote from: JimH on April 18, 2022, 05:14:17 pm

Did you try the other settings there?

I just did, one by one, and then all of them together but it didn't help.

Bro · « **Reply #5 on:** May 13, 2022, 05:32:52 am »

Quote from: Bro on April 19, 2022, 04:21:35 pm

I just did, one by one, and then all of them together but it didn't help.

Hi Jim, any news on this one? Cloudplay playlist still plays only first song from a list if sound is cast via upnp/dlna
Here's an example from alphabetically first Cloudplay user "100 AAA", playlist "Country 100"
I'm able to hear only the first song "I walk the line" but nothing else.

Wheaten · « **Reply #6 on:** May 13, 2022, 08:36:40 am »

I can confirm this behavior. What is even more strange the time keeps running even though the song has ended.

Only if I >> to the next song it will start playing, but at the end the same behavior. Time keeps moving even though the song has ended but the output stays silence.

bob · « **Reply #7 on:** May 13, 2022, 09:27:52 am »

Works fine for me to an IdPi.
I don't have a volumio renderer but they should be quite similar.
As a zone the IdPi is a DLNA renderer just like volumio.

You don't have the repeat control set to "Stop After Each Item" do you?

Bro · « **Reply #8 on:** May 14, 2022, 08:07:54 am »

Good question bob

but no, repeat settings are set to "repeat off".

Scobie · « **Reply #9 on:** May 14, 2022, 07:11:18 pm »

Cloudplay to my renderers works fine as well so possibly your MC settings.

Have you tried using AndrewFG's Whitebear tool to advise on suggested MC DLNA settings?

https://www.whitebear.ch/dmra.htm

bob · « **Reply #10 on:** May 16, 2022, 10:04:38 am »

Could be a volumio setting as well.

Bro · « **Reply #11 on:** September 18, 2022, 01:43:24 pm »

Quote from: Scobie on May 14, 2022, 07:11:18 pm

Cloudplay to my renderers works fine as well so possibly your MC settings.

Have you tried using AndrewFG's Whitebear tool to advise on suggested MC DLNA settings?

https://www.whitebear.ch/dmra.htm

Hi Scobie,
yes I tried it and saved all settings as they are suggested but the issue is still there

(first song is OK but second song wont play...)

Any other suggestion people how to make it work?

bob · « **Reply #12 on:** September 19, 2022, 01:50:53 pm »

Quote from: Bro on September 18, 2022, 01:43:24 pm

Hi Scobie,
yes I tried it and saved all settings as they are suggested but the issue is still there (first song is OK but second song wont play...)

Any other suggestion people how to make it work?

Perhaps turn off SetNext support for the volumio zone?
Right click on the zone, it's under DLNA controller options.

Bro · « **Reply #13 on:** September 20, 2022, 07:26:58 pm »

Quote from: bob on September 19, 2022, 01:50:53 pm

Perhaps turn off SetNext support for the volumio zone?
Right click on the zone, it's under DLNA controller options.

Hi Bob,
I tried it but no luck :/

BR,
Bro

Bro · « **Reply #14 on:** October 01, 2022, 04:18:36 pm »

Quote from: bob on May 16, 2022, 10:04:38 am

Could be a volumio setting as well.

I went through the option settings of Volumio as well but no luck...

bob · « **Reply #15 on:** October 14, 2022, 01:17:25 pm »

It seems like something is broken in Volumio's UPnP.
Checking into it.

bob · « **Reply #16 on:** October 14, 2022, 02:56:21 pm »

That seems to be it.
Volumio 3 is pretty broken.
https://community.volumio.org/t/volumio-isn-t-working/53794
Really basic stuff like getting the playback position from the Volumio renderer doesn't work. MC tries to work around it but that will make the track advance fail.

I backed off to Volumio 2 and it works perfectly with my Cloudplay.
You can get it from them here:
https://updates.volumio.org/pi/volumio/2.917/volumio-2.917-2021-10-06-pi.img.zip

Bro · « **Reply #17 on:** October 21, 2022, 06:12:38 pm »

many thanks Bob!

I'll try to submit bug report once again to Volumio...

Best regards,
Bro

JimH · « **Reply #18 on:** October 21, 2022, 06:20:44 pm »

If they need a license for testing, please have them send an email to jimh at jriver.

Bro · « **Reply #19 on:** November 05, 2022, 10:52:47 am »

I got a reply from Volumio they recognized the bug and already have it on their to do bug fixing list!

Bro · « **Reply #20 on:** February 21, 2023, 11:56:26 am »

Quote from: JimH on October 21, 2022, 06:20:44 pm

If they need a license for testing, please have them send an email to jimh at jriver.

They fixed the bug so its working now!

Best regards,
Bro

INTERACT FORUM

Author Topic: Cloudplay over UPnP (Read 2880 times)

Wheaten