INTERACT FORUM

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: Won't play higher than 48k [Solved]  (Read 1161 times)

clarpro

  • Recent member
  • *
  • Posts: 11
Won't play higher than 48k [Solved]
« on: August 17, 2024, 10:53:19 am »

My copy of JRiver all of a sudden won't play files at sample rates higher than 48K. Device settings are set like they always have been. The issue is the same on my Chord or Grace Design DAC and all of the sample rate frequencies are set to "no change". Am I missing sometthing? I've been with JRiver since v19, so thought I knew all of the various corners of JRiver. I just upgraded to the latest version 32, hoping something would get reset, but the issue remains. Many thanks
Logged

Awesome Donkey

  • Administrator
  • Citizen of the Universe
  • *****
  • Posts: 7784
  • Autumn shade...
Re: Won't play higher than 48k
« Reply #1 on: August 17, 2024, 10:59:56 am »

Have you tried rebooting the PC and equipment?
Logged
I don't work for JRiver... I help keep the forums safe from "male enhancements" and other sources of sketchy pharmaceuticals.

Windows 11 24H2 Update 64-bit + Ubuntu 24.10 Oracular Oriole 64-bit | Windows 11 24H2 Update 64-bit (Intel N305 Fanless NUC 16GB RAM/500GB M.2 NVMe SSD)
JRiver Media Center 33 (Windows + Linux) | iFi ZEN DAC 3 | JBL 306P MkII Studio Monitors | Audio-Technica ATH-M50x Headphones

clarpro

  • Recent member
  • *
  • Posts: 11
Re: Won't play higher than 48k
« Reply #2 on: August 17, 2024, 11:57:40 am »

Yes, many times. I'm actually an audio professional so don't often have issues getting equipment to communicate. Thanks for the insight.
Logged

dtc

  • MC Beta Team
  • Citizen of the Universe
  • *****
  • Posts: 3098
Re: Won't play higher than 48k
« Reply #3 on: August 17, 2024, 12:09:38 pm »

Could it be a shared/exclusive mode issue?
Logged

clarpro

  • Recent member
  • *
  • Posts: 11
Re: Won't play higher than 48k
« Reply #4 on: August 17, 2024, 08:07:05 pm »

Would this be an issue if I'm just playing WAV files from a hard drive?

So far I've tried:

New USB port
New USB cable
Reinstalled JRiver 31
Upgrated and installed JRiver 32
Reinstalled both USB drivers for Chord Hugo and Grace M908

Many thanks,
Clarpro
Logged

JimH

  • Administrator
  • Citizen of the Universe
  • *****
  • Posts: 72392
  • Where did I put my teeth?
Re: Won't play higher than 48k
« Reply #5 on: August 17, 2024, 09:32:57 pm »

You're using ASIO.  It's telling you that's what the device allows when using that audio driver.
Logged

dtc

  • MC Beta Team
  • Citizen of the Universe
  • *****
  • Posts: 3098
Re: Won't play higher than 48k
« Reply #6 on: August 17, 2024, 10:12:34 pm »

What happens when you use WASAPI? Do you have Exclusive mode set?
Logged

clarpro

  • Recent member
  • *
  • Posts: 11
Re: Won't play higher than 48k
« Reply #7 on: August 18, 2024, 09:20:04 am »

Thank you for you input. I get the same results using ASIO or WASAPI. I am in exclusive mode.

The Grace driver is capable of up to 192k and the Chord up to 384. Both have worked properly with JRiver for years.
Logged

dtc

  • MC Beta Team
  • Citizen of the Universe
  • *****
  • Posts: 3098
Re: Won't play higher than 48k
« Reply #8 on: August 18, 2024, 09:32:48 am »

fyi - I have not had any trouble with my Chord Qutest on MC 33 using Chord Asio driver v 1.05. Just tried it at 24/192 and it was fine.   I don't have access to my Hugo currently, but if the Qutest works then I presume the Hugo should also. Not sure what your problem is.
Logged

JimH

  • Administrator
  • Citizen of the Universe
  • *****
  • Posts: 72392
  • Where did I put my teeth?
Re: Won't play higher than 48k
« Reply #9 on: August 18, 2024, 11:17:18 am »

Thank you for you input. I get the same results using ASIO or WASAPI. I am in exclusive mode.

The Grace driver is capable of up to 192k and the Chord up to 384. Both have worked properly with JRiver for years.
Different connections may have different capabilities.

Same for drivers.

Specs aren't always reliable.
Logged

dtc

  • MC Beta Team
  • Citizen of the Universe
  • *****
  • Posts: 3098
Re: Won't play higher than 48k
« Reply #10 on: August 18, 2024, 02:24:15 pm »

The Hugo has 2 usb inputs. Did you inadvertently connect to the SD one? Grasping at straws.
Logged

clarpro

  • Recent member
  • *
  • Posts: 11
Re: Won't play higher than 48k
« Reply #11 on: August 18, 2024, 07:17:26 pm »

Thank you for thinking about this. I always use the HD port, the one in the same indentation as the switch. I work with a lot of DSD, so it's always plugged that way.

Still thinking about anything it could be. I'm leaning towards a Windows 10 issue.
Logged

JimH

  • Administrator
  • Citizen of the Universe
  • *****
  • Posts: 72392
  • Where did I put my teeth?
Re: Won't play higher than 48k
« Reply #12 on: August 18, 2024, 08:02:35 pm »

Try another port.
Logged

dtc

  • MC Beta Team
  • Citizen of the Universe
  • *****
  • Posts: 3098
Re: Won't play higher than 48k
« Reply #13 on: August 18, 2024, 08:04:14 pm »

That's what I expected.

I am using MC 33 on Windows 10 and, as I said, it is OK with high res and DSD with the ASIO driver on my Qutest. So, it is not a general MC on Windows 10 issue.
Logged

clarpro

  • Recent member
  • *
  • Posts: 11
Re: Won't play higher than 48k
« Reply #14 on: August 20, 2024, 01:56:55 pm »

Thank you for all of the help and suggestions. I figured it out, finally. I had the output of the Grace Design driver set to play 24 tracks, which didn't allow for playback at higher than 48k.

FYI, during all of my troubleshooting I loaded a few of the competing media players. JRiver was the best sounding, by far!
Cheers,
Clarpro
Logged

dtc

  • MC Beta Team
  • Citizen of the Universe
  • *****
  • Posts: 3098
Re: Won't play higher than 48k
« Reply #15 on: August 20, 2024, 02:00:53 pm »

 :) :) :)
Logged
Pages: [1]   Go Up