INTERACT FORUM

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: Low Volume  (Read 3640 times)

P.J

  • Recent member
  • *
  • Posts: 12
Low Volume
« on: November 02, 2009, 03:24:14 pm »
Hi everybody!

I noticed that MC doesn't play my files as loud as other programs.
I tried all of the output drivers, No DSP and else.
Any solution? :(
Logged

gappie

  • MC Beta Team
  • Citizen of the Universe
  • *****
  • Posts: 4580
Re: Low Volume
« Reply #1 on: November 02, 2009, 04:20:36 pm »
welcume.. 8)
there are a few things you could check. first, when you click on the small arros beside the volume you can switch between aplication volume and internal volume. check them. an other thing to try is switching between wave out or direct sound under options>playback. or are you using asio/wasapi?

 :)
gab
Logged

AoXoMoXoA

  • Regular Member
  • Citizen of the Universe
  • *****
  • Posts: 1551
  • I am a kangaroo . . . . no, really!
Re: Low Volume
« Reply #2 on: November 02, 2009, 04:36:06 pm »
You can adjust it in the DSP Studio.

Click on Volume Leveling and select Adjustment = Fixed, then set the amount to perhaps +3 db or +6 db. This should make it louder.
Logged
. . . the game is rigged

P.J

  • Recent member
  • *
  • Posts: 12
Re: Low Volume
« Reply #3 on: November 03, 2009, 03:47:12 am »
I tried but none of them worked :(
I'm using native ASIO.
Logged

JimH

  • Administrator
  • Citizen of the Universe
  • *****
  • Posts: 72448
  • Where did I put my teeth?
Re: Low Volume
« Reply #4 on: November 03, 2009, 08:36:52 am »
Check your startup settings for volume.
Logged

P.J

  • Recent member
  • *
  • Posts: 12
Re: Low Volume
« Reply #5 on: November 03, 2009, 09:10:07 am »
Quote from: JimH on November 03, 2009, 08:36:52 am
Check your startup settings for volume.

Yes, I set it to 20% which is good feature for me to prevent unwanted high volume.
What's wrong with it?  ?
Logged

JimH

  • Administrator
  • Citizen of the Universe
  • *****
  • Posts: 72448
  • Where did I put my teeth?
Re: Low Volume
« Reply #6 on: November 03, 2009, 09:46:25 am »
Set it higher.  Or turn up the volume after you start.
Logged

YannisA

  • Junior Woodchuck
  • **
  • Posts: 89
Re: Low Volume
« Reply #7 on: November 03, 2009, 11:04:25 am »
What about Tools > Options > Playback > DSP Studio > Equalizer and then raise the Pre-Amp slider?
Logged

P.J

  • Recent member
  • *
  • Posts: 12
Re: Low Volume
« Reply #8 on: November 03, 2009, 01:18:30 pm »
Quote from: YannisA on November 03, 2009, 11:04:25 am
What about Tools > Options > Playback > DSP Studio > Equalizer and then raise the Pre-Amp slider?

DSP works but I don't want to use DSP :-X

@JimH: I compared winamp with media center at the same volume. Winamp is ~2x louder.

However, if I turn up the volume to 100%, the peak level goes to 100% too.
Logged

gappie

  • MC Beta Team
  • Citizen of the Universe
  • *****
  • Posts: 4580
Re: Low Volume
« Reply #9 on: November 03, 2009, 03:22:00 pm »
what soundcard are you using? and which operating system.

nice to hear that winamp supports asio now natively. have not tried winamp for ages.

btw.. i play over asio on two machines and no problem with volume here.

 :)
gab
Logged

P.J

  • Recent member
  • *
  • Posts: 12
Re: Low Volume
« Reply #10 on: November 05, 2009, 12:47:24 pm »
Quote from: gappie on November 03, 2009, 03:22:00 pm
what soundcard are you using? and which operating system.

nice to hear that winamp supports asio now natively. have not tried winamp for ages.

btw.. i play over asio on two machines and no problem with volume here.

 :)
gab

Presonus Firebox, Windows 7 x64
I compared winamp in nomral mode and media center in normal/ASIO mode.
Even WMP12 (like winamp) is louder than media center.
Logged

P.J

  • Recent member
  • *
  • Posts: 12
Re: Low Volume
« Reply #11 on: November 11, 2009, 01:29:30 am »
Any solution?  ?
Logged

Matt

  • Administrator
  • Citizen of the Universe
  • *****
  • Posts: 42389
  • Shoes gone again!
Re: Low Volume
« Reply #12 on: November 11, 2009, 09:34:59 am »
It sounds like you need to turn the volume up (not the preamp).

You said "but the peak level goes to 100%" if I do this.  That's normal and safe.

Keep in mind there are three volume controls on Vista / Win7 (system, application, and optionally Media Center's internal volume) so you should check them all.  Some soundcards have another mixing slider in their control panel you could also check.

Logged
Matt Ashland, JRiver Media Center

P.J

  • Recent member
  • *
  • Posts: 12
Re: Low Volume
« Reply #13 on: November 12, 2009, 01:29:54 pm »
Ain't it for Replay gain?  ?
I add my files by drag and dropping to the "Now Playing" not through the library.
I've heard Media Center takes care of distortion too.
Logged

Matt

  • Administrator
  • Citizen of the Universe
  • *****
  • Posts: 42389
  • Shoes gone again!
Re: Low Volume
« Reply #14 on: November 12, 2009, 01:32:57 pm »
Quote from: P.J on November 12, 2009, 01:29:54 pm
Ain't it for Replay gain?  ?
I add my files by drag and dropping to the "Now Playing" not through the library.
I've heard Media Center takes care of distortion too.

I'm sorry, but I don't think I understand.

You said the volume is low.  You also said the volume set to 20%, which should sound low.

You said you have DSPs disabled, but then mentioned Replay Gain, which is a DSP.  Replay Gain will turn down the volume of most music.  This is expected.

If you still think there's a problem, please describe it in more detail.

Thanks.
Logged
Matt Ashland, JRiver Media Center

P.J

  • Recent member
  • *
  • Posts: 12
Re: Low Volume
« Reply #15 on: November 12, 2009, 04:07:59 pm »
No, I don't use DSP. The volume is ok because I can only use internal volume in ASIO mode (other are at 100%)
When I compare media center with other programs at the same volume, I find it quieter.
I'll test it in XP tomorrow too and give you the result  ::)
Logged

gappie

  • MC Beta Team
  • Citizen of the Universe
  • *****
  • Posts: 4580
Re: Low Volume
« Reply #16 on: November 12, 2009, 04:25:23 pm »
Quote from: P.J on November 12, 2009, 04:07:59 pm
No, I don't use DSP. The volume is ok because I can only use internal volume in ASIO mode (other are at 100%)
When I compare media center with other programs at the same volume, I find it quieter.
I'll test it in XP tomorrow too and give you the result  ::)
you do realise the comparison does not make much sense.. when you set the other players to use asio also it might be a bit more interesting, it could be an interesting note. or use directsound or wave out in mc. have you tried wasapi? cant wait to hear the conclusion...
Logged

Matt

  • Administrator
  • Citizen of the Universe
  • *****
  • Posts: 42389
  • Shoes gone again!
Re: Low Volume
« Reply #17 on: November 12, 2009, 04:29:08 pm »
Quote from: P.J on November 12, 2009, 04:07:59 pm
with other programs at the same volume, I find it quieter

Are you saying Media Center at 20% is different than another program at 20%?

Different volume implementations may very well use different scalars at 20%.  We're a logarithmic scale, using volume_scalar = pow(%, 1.7).
Logged
Matt Ashland, JRiver Media Center

P.J

  • Recent member
  • *
  • Posts: 12
Re: Low Volume
« Reply #18 on: November 13, 2009, 12:43:54 pm »
Quote from: Matt on November 12, 2009, 04:29:08 pm
Are you saying Media Center at 20% is different than another program at 20%?

Different volume implementations may very well use different scalars at 20%.  We're a logarithmic scale, using volume_scalar = pow(%, 1.7).

Oh! so it's not linear like other programs, right?

@gappie: yes, I tried everything.
Logged

AoXoMoXoA

  • Regular Member
  • Citizen of the Universe
  • *****
  • Posts: 1551
  • I am a kangaroo . . . . no, really!
Re: Low Volume
« Reply #19 on: November 13, 2009, 12:54:35 pm »
Quote from: P.J on November 13, 2009, 12:43:54 pm
Oh! so it's not linear like other programs, right?

Physical volume controls are not linear, they are made to be "audio taper" so as to more closely align with how the human ear discerns volume changes.
Logged
. . . the game is rigged

Matt

  • Administrator
  • Citizen of the Universe
  • *****
  • Posts: 42389
  • Shoes gone again!
Re: Low Volume
« Reply #20 on: November 13, 2009, 12:59:40 pm »
Quote from: P.J on November 13, 2009, 12:43:54 pm
Oh! so it's not linear like other programs, right?

No good software would use a linear slider, but there's no one correct percentage to scalar mapping.  (and I don't see that there really needs to be)

If you google, you'll find lots of discussion about this.  For example: http://www.dr-lex.be/info-stuff/volumecontrols.html
Logged
Matt Ashland, JRiver Media Center

Mr ChriZ

  • Citizen of the Universe
  • *****
  • Posts: 4375
  • :-D
Re: Low Volume
« Reply #21 on: November 13, 2009, 05:10:32 pm »
Quote from: AoXoMoXoA on November 13, 2009, 12:54:35 pm
Physical volume controls are not linear, they are made to be "audio taper" so as to more closely align with how the human ear discerns volume changes.

Sorry to thread hijack, but does this include volume controls on most amplifiers?
Just interested  :)
Logged

AoXoMoXoA

  • Regular Member
  • Citizen of the Universe
  • *****
  • Posts: 1551
  • I am a kangaroo . . . . no, really!
Re: Low Volume
« Reply #22 on: November 13, 2009, 08:11:29 pm »
Quote from: Mr ChriZ on November 13, 2009, 05:10:32 pm
Sorry to thread hijack, but does this include volume controls on most amplifiers?
Just interested  :)
Matter of fact, yes. The volume change between say 8:00 and 9:00 is usually much less than that between 12:00 and 1:00 on the dial. At the bottom of the dial the change is more gradual and gets faster as you go higher up the dial.
Logged
. . . the game is rigged

P.J

  • Recent member
  • *
  • Posts: 12
Re: Low Volume
« Reply #23 on: November 14, 2009, 01:51:52 am »
Quote from: Matt on November 12, 2009, 04:29:08 pm
Are you saying Media Center at 20% is different than another program at 20%?

Different volume implementations may very well use different scalars at 20%.  We're a logarithmic scale, using volume_scalar = pow(%, 1.7).

Yes! volume_scalar = pow(%, 1.7)
That's why the volume is always lower ;)

Thank you :)
Logged

p7389

  • World Citizen
  • ***
  • Posts: 171
Re: Low Volume
« Reply #24 on: November 14, 2009, 05:43:43 am »
This is fascinating.
Logged
[img width= height= alt=My Top Albums]http://lastfm.obsessive-media.de/3month/7x1/p7389.jpeg[/img]
Pages: [1]   Go Up
« previous next »