Topic: Gizmo by dyn address (Read 4513 times)

justsomeguy · « **on:** January 31, 2013, 09:55:32 pm »

I just installed the latest gizmo on my phone. Decided to try connecting by ip address instead of access code and it works fine if I use the actual ip xxx.xxx.xxx.xxx:52199. I then decided to try the dynamic dns address I use ****.dynalias.com:52199 the problem I ran into was I ran out of room to type in my full domain name. I got up to ******.dynalias.com:52 then couldn't type anymore. Will this work with a dynamic ip service and could you allowing entering more characters into the field?

Thanks

Matt · « **Reply #1 on:** January 31, 2013, 10:08:13 pm »

Sorry, but only an Access Key or IP address is supported at the current time.

bytestar · « **Reply #2 on:** February 25, 2013, 01:58:41 pm »

I have the same Problem, please adds support for dynamic DNS

icstm · « **Reply #3 on:** March 05, 2013, 08:25:27 am »

sounds like a good idea as I use DynDNS as well.

How does it currently work?
JRiver's servers much have a record of your IP address, how often is that updated?
Surely properly designed, you need neither the IP address or URL?

auger · « **Reply #4 on:** April 25, 2013, 07:42:49 pm »

Ouch. I just installed the trial. I didn't think of DynDNS not working.

Is this something you're working on, or is it way down the road?

Castius · « **Reply #5 on:** April 25, 2013, 09:09:14 pm »

An alternative you can use webGizmo. It works fine with dynamic dns.
"DynamicIP":"port"/Gizmo

bytestar · « **Reply #6 on:** June 18, 2013, 05:15:28 am »

JRiver please add Support for Dynamic DNS to Gizmo (android app)

icstm · « **Reply #7 on:** June 18, 2013, 06:13:24 am »

"DynamicIP":"port" works fine (not sure about the /gizmo, not needed in Gizmo).
Not tried "dyndnsdomainname:port" on Gizmo, but works fine from the PC.

bytestar · « **Reply #8 on:** June 18, 2013, 09:01:09 am »

IP connection is not a problem, but the Gizmo Android app allows no dyndns.

Quote from: icstm on June 18, 2013, 06:13:24 am

"DynamicIP":"port" works fine (not sure about the /gizmo, not needed in Gizmo).
Not tried "dyndnsdomainname:port" on Gizmo, but works fine from the PC.

Matt · « **Reply #9 on:** June 18, 2013, 09:15:48 am »

If you have a dynamic IP address, please use an Access Key.

Dynamic IP addresses are one of the reasons we created the Access Key system.

bytestar · « **Reply #10 on:** June 18, 2013, 09:46:10 am »

I already understood that, but unfortunately an access from outside via the mobile network does not works.
Yes the port is forwarded through the router, and Web Gizmo works too. Why can you can not type directly http://dyndns.org etc in the Gizmo app?
This would solve the problem immediately, and you could hear music from home on the road with Gizmo.

Quote from: Matt on June 18, 2013, 09:15:48 am

If you have a dynamic IP address, please use an Access Key.

Dynamic IP addresses are one of the reasons we created the Access Key system.

Castius · « **Reply #11 on:** June 18, 2013, 09:57:06 am »

I use a dynamicDns for web gizmo. And a access key for gizmo. It works great.
I'm not sure why that would not work and web gizmo would.

JimH · « **Reply #12 on:** June 18, 2013, 11:05:51 am »

The Access Key method does work with Gizmo from outside a network.

bytestar · « **Reply #13 on:** June 18, 2013, 04:37:34 pm »

Thanks Jim i will check it again tomorrow.

Quote from: JimH on June 18, 2013, 11:05:51 am

The Access Key method does work with Gizmo from outside a network.

jreigner · « **Reply #14 on:** June 18, 2013, 04:51:52 pm »

The access key method through Gizmo is a perfect match for me. I use it at work on the road and around the house works perfectly.

icstm · « **Reply #15 on:** June 19, 2013, 06:29:21 am »

Access key does indeed work well, but if you wanted to use a different port on your router, then this is not possible. Worth noting.

bytestar · « **Reply #16 on:** June 19, 2013, 08:32:39 am »

That is it, that is my Problem exactly $:-\$

Quote from: icstm on June 19, 2013, 06:29:21 am

Access key does indeed work well, but if you wanted to use a different port on your router, then this is not possible. Worth noting.

Castius · « **Reply #17 on:** June 19, 2013, 09:57:13 am »

I use a different port. Works for me.

jreigner · « **Reply #18 on:** June 19, 2013, 11:21:27 am »

I port through 443 at work and works fine for me too.

icstm · « **Reply #19 on:** June 26, 2013, 10:08:26 am »

What works fine?
Using the Access Key, or using the IP address and your newly selected port?

Yes, using your own IP and port works, but then JRiver servers do not pick up the new IP and port for the access key in my experience.

@jreigner and @Castius
are you suggesting otherwise?

Castius · « **Reply #20 on:** June 26, 2013, 10:28:11 am »

In my experience it works fine.
I use a static ip for my local PC server.
On my router I setup port forward to that ip using a custom port

I use the access key for all gizmos and MC.
2 nexus 4
1 nexus 7
1 google TV
1 MC client running at work

For all webgizmo access is use my dyn address.

What i don't know is what happen when the ISP ip address changes.
I don't think mine changes that much

icstm · « **Reply #21 on:** June 27, 2013, 07:27:39 am »

There is definately no problem if your ISP ip changes, that is the purpose of the access key, to handle that event.
Mine used to be quite static, but with some changes at the exchange equipment mine is now quite dynamic.

However the access key approach does not work for me if the open port on the router is NOT the default for JRiver (52199 I think from memory)

INTERACT FORUM

Author Topic: Gizmo by dyn address (Read 4513 times)