INTERACT FORUM

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1] 2   Go Down

Author Topic: NEW: VST3 Support  (Read 24463 times)

Matt

  • Administrator
  • Citizen of the Universe
  • *****
  • Posts: 41858
  • Shoes gone again!
NEW: VST3 Support
« on: August 31, 2020, 10:40:47 am »

Description
Media Center 27 now supports the newest VST standard, called VST 3.  The older standard, VST 2, is also supported.

There have been several threads requesting this:
https://yabb.jriver.com/interact/index.php/topic,125921.0.html
https://yabb.jriver.com/interact/index.php/topic,126632.0.html

The program can now install and use these VST 3 plugins.

Instructions
Find a vst3 DLL on your hard drive and install it using DSP Studio > Manage Plug-ins > Add JRiver, VST, or Winamp Plug-in...  You'll need to switch the entry box to "VST 3 Files (*.vst3)" to select them.

You can then view the plugin in DSP Studio, edit its configuration, and turn it on.

It will then process just like the existing plug-ins and VST2 support.
Logged
Matt Ashland, JRiver Media Center

dtc

  • MC Beta Team
  • Citizen of the Universe
  • *****
  • Posts: 2992
Re: NEW: VST 3 Support
« Reply #1 on: September 02, 2020, 10:11:20 am »

Good addition. There will be many happy users.
Logged

Craig

  • MC Beta Team
  • Citizen of the Universe
  • *****
  • Posts: 612
Re: NEW: VST 3 Support
« Reply #2 on: September 02, 2020, 03:05:24 pm »

Would it be worth adding an organiser rather than trawling through for .dll's and .vst's?

Craig
Logged
MC2Slim - Windows Shell and JRiver Media Center Integration for Squeezebox.

http://www.duff-zapp.co.uk

mojave

  • MC Beta Team
  • Citizen of the Universe
  • *****
  • Posts: 3732
  • Requires "iTunes or better" so I installed JRiver
Re: NEW: VST 3 Support
« Reply #3 on: September 02, 2020, 05:06:56 pm »

Would it be worth adding an organiser rather than trawling through for .dll's and .vst's?

Craig
All VST3 plugins must be stored in either of these two locations:
C:\Program Files\Common Files\VST3
C:\Program Files (x86)\Common Files\VST3

There should be no other place to look.
Logged

Craig

  • MC Beta Team
  • Citizen of the Universe
  • *****
  • Posts: 612
Re: NEW: VST 3 Support
« Reply #4 on: September 03, 2020, 03:21:19 am »

I didn't realise that but I have older plugins in various other locations.

I meant that if MC enumerated installed plugins like a DAW does then it would be much easier.

For example, I have four Waves plugins, all are available in Wavelab as mono or stereo and the reverbs additionally can be mono in stereo out yet I only have a single WaveShell1-VST3 11.0_x64.VST3, the plugins themselves appear to be single .dll's within \Program Files (x86)\Waves.

So far I'm not having much luck, I'm currently in a situation where trying to open DSP studio crashes MC due to some plugin I've tried to install.

Craig

 
Logged
MC2Slim - Windows Shell and JRiver Media Center Integration for Squeezebox.

http://www.duff-zapp.co.uk

Matt

  • Administrator
  • Citizen of the Universe
  • *****
  • Posts: 41858
  • Shoes gone again!
Re: NEW: VST 3 Support
« Reply #5 on: September 03, 2020, 08:01:08 am »

You should be able to remove plugins by editing this path in the registry:
HKEY_LOCAL_MACHINE\SOFTWARE\JRiver\Media Center 27\Plugins\DSP

If you have one that crashes that you could share, please do.  I'm matt at jriver.  Thanks.
Logged
Matt Ashland, JRiver Media Center

Craig

  • MC Beta Team
  • Citizen of the Universe
  • *****
  • Posts: 612
Re: NEW: VST 3 Support
« Reply #6 on: September 03, 2020, 08:46:15 am »

Thanks Matt, it was my Focusrite ones.

I've sent them to you.

Craig
Logged
MC2Slim - Windows Shell and JRiver Media Center Integration for Squeezebox.

http://www.duff-zapp.co.uk

Matt

  • Administrator
  • Citizen of the Universe
  • *****
  • Posts: 41858
  • Shoes gone again!
Re: NEW: VST 3 Support
« Reply #7 on: September 03, 2020, 10:00:40 am »

The crash will be fixed and more plug-ins will have a display.  Thanks a lot for the help.
Logged
Matt Ashland, JRiver Media Center

Mitchco

  • MC Beta Team
  • World Citizen
  • *****
  • Posts: 173
Re: NEW: VST 3 Support
« Reply #8 on: September 03, 2020, 11:01:59 pm »

Awesome Matt! Super happy that this is being implemented! Thank you!

https://juce.com/ makes a pretty good framework for multi-platform audio applications. I compiled one of their examples, GainPlugin as both a VST2 and VST3 plugin. The VST2 runs on MC26 no problem. I have attached a screen shot.

When loading the VST2 in MC27, the plugin loads, and the cursor spins for a moment and then I get the mouse pointer back, but the plugin is not seen. So don't know if it actually loaded or not as it does not show up. See attached screen shot.

When loading VST3 in MC27, same behavior as above, except MC27 closes (hard crash). When I relaunch MC27 and click on Options-->DSP and output format, MC27 closes again. The only solution is to uninstall MC27 and reinstall.

Here is a link to the log files and zipped versions of the GainPlug VST2 and VST3 for testing/debugging:

https://1drv.ms/u/s!AkWCC3_FDUYSglky29zRPUuE9THr?e=SW7dSV

Looking forward to seeing this work! Let me know how I can assist...

Kind regards,
Mitch

Craig

  • MC Beta Team
  • Citizen of the Universe
  • *****
  • Posts: 612
Re: NEW: VST 3 Support
« Reply #9 on: September 04, 2020, 02:52:13 am »

Mitch,
See Matt's reply to me above about the registry, that will save you having to reinstall MC.

Craig
Logged
MC2Slim - Windows Shell and JRiver Media Center Integration for Squeezebox.

http://www.duff-zapp.co.uk

Mitchco

  • MC Beta Team
  • World Citizen
  • *****
  • Posts: 173
Re: NEW: VST 3 Support
« Reply #10 on: September 04, 2020, 11:19:36 am »

Thanks Craig!

Craig

  • MC Beta Team
  • Citizen of the Universe
  • *****
  • Posts: 612
Re: NEW: VST 3 Support
« Reply #11 on: September 05, 2020, 08:56:49 am »

The Focusrite are displaying correctly now but don't appear to be working, they just kill the audio when they're enabled.

With regards to Waves I can only get one shell.vst3 to load, that brings up H-Comp but that gives a format not supported error.
I can't see a way to load my other Waves plugins.

Craig
Logged
MC2Slim - Windows Shell and JRiver Media Center Integration for Squeezebox.

http://www.duff-zapp.co.uk

Craig

  • MC Beta Team
  • Citizen of the Universe
  • *****
  • Posts: 612
Re: NEW: VST 3 Support
« Reply #12 on: September 05, 2020, 11:03:24 am »

Out of curiosity I renamed my Abbey Road Chambers reverb .dll and Steinberg Wavelab still listed it but threw an error when I tried to open it.
Then I renamed the Waveshell Vst and Wavelab no longer listed any Waves plugins.

That seems to suggest that although the plugins are VST3's they are actually .dll files and they are loaded via the Waveshell VST and I presume that is used for setting parameters like number of channels.

Craig
Logged
MC2Slim - Windows Shell and JRiver Media Center Integration for Squeezebox.

http://www.duff-zapp.co.uk

Matt

  • Administrator
  • Citizen of the Universe
  • *****
  • Posts: 41858
  • Shoes gone again!
Re: NEW: VST 3 Support
« Reply #13 on: September 06, 2020, 09:59:55 am »

Some of the VST3 effects are outputting silence.  I'll try to figure it out this week.
Logged
Matt Ashland, JRiver Media Center

Craig

  • MC Beta Team
  • Citizen of the Universe
  • *****
  • Posts: 612
Re: NEW: VST 3 Support
« Reply #14 on: September 06, 2020, 11:30:42 am »

Some of the VST3 effects are outputting silence.  I'll try to figure it out this week.

I wasn't seeing anything on the compressor's input meters suggesting that there's nothing going in.

Craig
Logged
MC2Slim - Windows Shell and JRiver Media Center Integration for Squeezebox.

http://www.duff-zapp.co.uk

hulkss

  • Galactic Citizen
  • ****
  • Posts: 446
Re: NEW: VST 3 Support
« Reply #15 on: September 07, 2020, 06:44:08 pm »

I've had success with Waves VST3 plugins in Media Center 26 by using DDMF Metaplugin64.

I've found that version 3.4.3 of Metaplugin64 works in MC 26.0.106. I tried a new newer version of Metaplugin64 and had problems.
Logged

whoareyou

  • Galactic Citizen
  • ****
  • Posts: 375
Re: NEW: VST 3 Support
« Reply #16 on: September 09, 2020, 11:00:12 am »

Latest dirac VST3 plugin does not work.  JRiver crashes. 

VST2 plugin works as expected.

For now, I will submit report with Dirac and let you know what they say.



Logged
Windows 11 Pro
Intel i7-12700K / 32MBRam /
ASUS Dual GeForce RTX 4070
4K Sony x900h

Hendrik

  • Administrator
  • Citizen of the Universe
  • *****
  • Posts: 10661
Re: NEW: VST 3 Support
« Reply #17 on: September 09, 2020, 11:05:50 am »

Latest dirac VST3 plugin does not work.  JRiver crashes. 

VST2 plugin works as expected.

For now, I will submit report with Dirac and let you know what they say.

I wouldn't bother them with that yet. Matt's work on VST3 support has only begun, give him some time to figure it all out.
Logged
~ nevcairiel
~ Author of LAV Filters

whoareyou

  • Galactic Citizen
  • ****
  • Posts: 375
Re: NEW: VST 3 Support
« Reply #18 on: September 09, 2020, 04:03:25 pm »

Well, for now I mentioned to them about the new JRiver VST3 support and also that it is very early in JRiver 27 dev cycle.

From past experience, I believe their support team will track JRiver 27 development and do some VST3 testing along the way.



Logged
Windows 11 Pro
Intel i7-12700K / 32MBRam /
ASUS Dual GeForce RTX 4070
4K Sony x900h

JimH

  • Administrator
  • Citizen of the Universe
  • *****
  • Posts: 71211
  • where the buffalo roam
Re: NEW: VST 3 Support
« Reply #19 on: September 09, 2020, 04:36:34 pm »

We'll provide a license if they want one.  They could send me a request.

jimh at jriver
Logged

bahamot

  • Recent member
  • *
  • Posts: 23
Re: NEW: VST 3 Support
« Reply #20 on: September 11, 2020, 09:53:54 am »

Just tried load Voxengo GlissEQ and Elephant VST3 plugins, both added fine but does not produce sound when playing.
Both can be trial here:
https://www.voxengo.com/product/elephant/
https://www.voxengo.com/product/glisseq/
Logged

GoodEnoughGear

  • Recent member
  • *
  • Posts: 21
Re: NEW: VST 3 Support
« Reply #21 on: September 15, 2020, 01:21:48 am »

Hi folks,

I'm using Blue Cat Patchwork to manage my plugins. I have a Patchwork configuration loading VST3s of the following: DMG Equilibrium, DMG Essence, DMG TrackControl and SPL Twintube. So MC loads Patchwork and Patchwork loads the other plugins. MC only 'sees' Patchwork.

I have loaded both VST and VST3 versions of Patchwork into JRMC27.

If I enable Patchwork as a regular VST (.dll) it works fine, showing "Enabled and processing 44.1 kHz 64bit 2ch".

However if I load Patchwork as a VST3 I DO get audio, but nothing being processed (no signal showing and no output in Patchwork) and an error "Output format not supported" instead of "Enabled and processing 44.1 kHz 64bit 2ch".

Happy to help troubleshoot if helpful, just some feedback for now on this.

Edit: System is Windows 10 64-bit running latest updates and MC 27.0.12 (64-bit). Also reordering PatchWork in the MC list crashes MC, but other plugins can be reordered around Patchwork just fine.
Logged

whoareyou

  • Galactic Citizen
  • ****
  • Posts: 375
Re: NEW: VST 3 Support
« Reply #22 on: September 15, 2020, 07:57:51 pm »

We'll provide a license if they want one.  They could send me a request.

jimh at jriver

Dirac made similar offer.  Hopefully they have contacted you.
Logged
Windows 11 Pro
Intel i7-12700K / 32MBRam /
ASUS Dual GeForce RTX 4070
4K Sony x900h

JimH

  • Administrator
  • Citizen of the Universe
  • *****
  • Posts: 71211
  • where the buffalo roam
Re: NEW: VST 3 Support
« Reply #23 on: September 15, 2020, 09:21:06 pm »

They did.  I sent them a license.
Logged

m.i.c.k.e.y

  • Recent member
  • *
  • Posts: 13
Re: NEW: VST 3 Support
« Reply #24 on: September 17, 2020, 01:03:43 am »

One happy user here. Finally!

Thank you!

Logged

IAM4UK

  • World Citizen
  • ***
  • Posts: 238
Re: NEW: VST 3 Support
« Reply #25 on: September 17, 2020, 09:31:43 am »

Tried to load iZotope RX8 Spectral De-Noise VST3. MC pop-up window said "Failed to install plug-in."
Logged

IAM4UK

  • World Citizen
  • ***
  • Posts: 238
Re: NEW: VST 3 Support
« Reply #26 on: September 17, 2020, 09:35:40 am »

One happy user here. Finally!

Thank you!



I am interested in trying my Ozone 9 Advanced within MC. m.i.c.k.e.y, can you share how you got that to install within DSP Studio? For me, it simply said, "Failed to install plug-in."
Logged

JimH

  • Administrator
  • Citizen of the Universe
  • *****
  • Posts: 71211
  • where the buffalo roam
Re: NEW: VST 3 Support
« Reply #27 on: September 17, 2020, 10:32:36 am »

What version of MC?
Logged

IAM4UK

  • World Citizen
  • ***
  • Posts: 238
Re: NEW: VST 3 Support
« Reply #28 on: September 17, 2020, 02:18:18 pm »

Logged

Musicmusic

  • Recent member
  • *
  • Posts: 7
Re: NEW: VST 3 Support
« Reply #29 on: September 18, 2020, 12:42:46 am »

It is my understanding that VST3 files are not dll's but have a vst3 extension. Scanning for dll under vst3 will mis files with vst3 extensions.

I can provide examples of vst3 only files.
Logged

m.i.c.k.e.y

  • Recent member
  • *
  • Posts: 13
Re: NEW: VST 3 Support
« Reply #30 on: September 18, 2020, 06:28:16 pm »

I am interested in trying my Ozone 9 Advanced within MC. m.i.c.k.e.y, can you share how you got that to install within DSP Studio? For me, it simply said, "Failed to install plug-in."

Sorry for the lateness. Like Musicmusic had said (it was my initial error too). When choosing plugin, change .DLL on the extention box to .VST3 like the image below.



Logged

IAM4UK

  • World Citizen
  • ***
  • Posts: 238
Re: NEW: VST 3 Support
« Reply #31 on: September 18, 2020, 08:21:01 pm »

musicmusic and m.i.c.k.e.y Thank you so much! That works.
Logged

Musicmusic

  • Recent member
  • *
  • Posts: 7
Re: NEW: VST 3 Support
« Reply #32 on: September 19, 2020, 02:42:17 am »

musicmusic and m.i.c.k.e.y Thank you so much! That works.

Note that simply changing the extension can fail many times. For example, vst released as vst3 extension may not work when simply renamed as dll.

There has to be a clearer solution.
Logged

IAM4UK

  • World Citizen
  • ***
  • Posts: 238
Re: NEW: VST 3 Support
« Reply #33 on: September 19, 2020, 09:01:38 am »

Note that simply changing the extension can fail many times. For example, vst released as vst3 extension may not work when simply renamed as dll.

There has to be a clearer solution.

Understood.
As it happens, the iZotope plugins I want to try to use have their own .vst3 iterations, so I did not rename anything, I just selected the .vst3 instead of the .dll
It's an interesting new aspect to DSP Studio, which I had not tried much to use before for equalization or noise reduction.
Logged

rlwings

  • Recent member
  • *
  • Posts: 8
Re: NEW: VST 3 Support
« Reply #34 on: September 19, 2020, 01:08:55 pm »

Thank you for VST3 support! ... However I can't seem to get Dirac room correction VST3 to work. I keep getting "Output format not supported" message. I'm trying to run higher resolutions: 176.4\24

Any ideas? - Does this new VST3 functionality support higher resolutions yet? (I'm also using the WDM driver in Windows 64, JRiver 27)

Thanks!
Logged

JimH

  • Administrator
  • Citizen of the Universe
  • *****
  • Posts: 71211
  • where the buffalo roam
Re: NEW: VST 3 Support
« Reply #35 on: September 25, 2020, 03:21:29 pm »

Logged

rlwings

  • Recent member
  • *
  • Posts: 8
Re: NEW: VST 3 Support
« Reply #36 on: September 25, 2020, 06:57:08 pm »

Logged

rlwings

  • Recent member
  • *
  • Posts: 8
Re: NEW: VST 3 Support
« Reply #37 on: September 26, 2020, 12:06:57 pm »

Dirac should work in this build.
https://yabb.jriver.com/interact/index.php/topic,126998.msg880714.html#msg880714
Hello...So I gave VST3 a try using Dirac and it indeed worked, however there was a problem I'd like to report... It seems that the audio delay has been increased considerably compared to VST2 and is now impossible to get the video and audio in reasonable sync. I tried changing the 2 different delay settings in JRiver to no avail.

I was always able to minimize the audio\video delay when using VST2 and Dirac in JRiver. And I'm wondering if this is an inherent characteristic of VST3 or if it can be made more efficient in JRiver.

I am using the WDM driver in Windows.

Thanks for any input. :)
Logged

jason3

  • Recent member
  • *
  • Posts: 24
Re: NEW: VST 3 Support
« Reply #38 on: October 01, 2020, 02:45:49 pm »

I am trying to get the Audeze Reveal + VST3 to work and it doesn't seem to be installing?  It sees the file and acts like it installs but there is nothing on the Reveal page being displayed?  Any thoughts?
Logged

JimH

  • Administrator
  • Citizen of the Universe
  • *****
  • Posts: 71211
  • where the buffalo roam
Re: NEW: VST 3 Support
« Reply #39 on: October 01, 2020, 02:54:02 pm »

Are you using 27.0.16?
Logged

jason3

  • Recent member
  • *
  • Posts: 24
Re: NEW: VST 3 Support
« Reply #40 on: October 01, 2020, 02:56:06 pm »

Me?  No, 27.0.15.  Just installed it.  I still have 26 installed, too.  I wonder if that has anything to do with it?
Logged

JimH

  • Administrator
  • Citizen of the Universe
  • *****
  • Posts: 71211
  • where the buffalo roam
Re: NEW: VST 3 Support
« Reply #41 on: October 01, 2020, 02:58:04 pm »

Try it.  It's at the top of this board.
Logged

jason3

  • Recent member
  • *
  • Posts: 24
Re: NEW: VST 3 Support
« Reply #42 on: October 01, 2020, 03:06:14 pm »

Thanks.  That worked.  =)
Logged

rlwings

  • Recent member
  • *
  • Posts: 8
Re: NEW: VST 3 Support
« Reply #43 on: October 01, 2020, 03:49:10 pm »

Try it.  It's at the top of this board.
Does the new VST3 cause more audio delay than the older VST2 did? ... Seems I am suddenly having major lip-sync issues that weren't happening with VST2. - Anybody?
Logged

Hendrik

  • Administrator
  • Citizen of the Universe
  • *****
  • Posts: 10661
Re: NEW: VST 3 Support
« Reply #44 on: October 12, 2020, 02:04:18 pm »

Does the new VST3 cause more audio delay than the older VST2 did? ... Seems I am suddenly having major lip-sync issues that weren't happening with VST2. - Anybody?
If you had something that worked for you, just keep using that.

Note that live input will always be hard to get to sync properly when any form of DSP is involved.
Logged
~ nevcairiel
~ Author of LAV Filters

ti_dust

  • Recent member
  • *
  • Posts: 26
Re: NEW: VST 3 Support
« Reply #45 on: October 12, 2020, 08:02:50 pm »

Just wanted to report that two of my favorite VST3 plugins work, but J River does not retain settings when you restart the J River app.

Plugin: DMG Audio EQuality    https://www.dmgaudio.com/products_equality.php
Plugin: DMG Audio EQuilibrium    https://www.dmgaudio.com/equilibrium

Definitely no big deal since VST2 works fine and has for a long time now, but I thought I'd mention this bug.
Logged

rlwings

  • Recent member
  • *
  • Posts: 8
Re: NEW: VST 3 Support
« Reply #46 on: October 12, 2020, 09:18:17 pm »

If you had something that worked for you, just keep using that.

Note that live input will always be hard to get to sync properly when any form of DSP is involved.
Thanks, yes I have reverted back to using VST2. I realize that DSP causes some delay, just wondered why VST3 seem to be creating much more delay than VST2 did. Possibly it's early in JRiver's development? Or maybe it's a problem with my particular plugin? (Dirac)... Either way I was just looking to understand what to expect from VST3.
Logged

hulkss

  • Galactic Citizen
  • ****
  • Posts: 446
Re: NEW: VST 3 Support
« Reply #47 on: October 13, 2020, 06:19:45 pm »

I have to stay away from VST3 and used VST2 also.

The DIRAC VST3 plugin does not recognize multi-channel properly and will not process multi-channel audio. Works fine as 7.1 with VST2, however, it will not pass through a timing reference signal on another channel above the first 8.

I can not load Waves Plugins. WaveShell does not work properly in JRiver. As a work around, I install Waves plugins into DDMF Metaplugin which also must be the VST2 version in order to offer the save buttons in the upper right of the attached image. The DTS Neural UpMix plugin works fine as a VST3 inside of Metaplugin VST2.
Logged

RoderickGI

  • MC Beta Team
  • Citizen of the Universe
  • *****
  • Posts: 8186
Re: NEW: VST 3 Support
« Reply #48 on: October 19, 2020, 08:38:34 pm »

I don't use VSTs normally, although I have looked at a couple of specific ones previously.

I was surprised that I couldn't set the VST Display as a Visualisation in Playing Now, so that it is always tied to the top pane of Playing Now, rather than floating free as a separate window, all the extra DSP bits.

Have I missed something?
Would this be possible in future?
Logged
What specific version of MC you are running:MC27.0.27 @ Oct 27, 2020 and updating regularly Jim!                        MC Release Notes: https://wiki.jriver.com/index.php/Release_Notes
What OS(s) and Version you are running:     Windows 10 Pro 64bit Version 2004 (OS Build 19041.572).
The JRMark score of the PC with an issue:    JRMark (version 26.0.52 64 bit): 3419
Important relevant info about your environment:     
  Using the HTPC as a MC Server & a Workstation as a MC Client plus some DLNA clients.
  Running JRiver for Android, JRemote2, Gizmo, & MO 4Media on a Sony Xperia XZ Premium Android 9.
  Playing video out to a Sony 65" TV connected via HDMI, playing digital audio out via motherboard sound card, PCIe TV tuner

HamishNorton

  • Recent member
  • *
  • Posts: 32
VST3 Support
« Reply #49 on: December 19, 2020, 04:30:27 pm »

I am trying to use Waves NX which is VST3 but has many separate plugins inside the single .VST3 file, which handle stereo, 5.1, ambisonic, etc.  The only one that MC27 allows me to see is the ambisonic one, while I want to use the stereo one. I can use it with DDMF Metaplugin - see attached screen captures.

Logged
Pages: [1] 2   Go Up