Topic: HDHomeRun Prime (Read 52300 times)

muzicman0 · « **on:** April 10, 2013, 11:16:36 pm »

I was excited to see experimental support for the prime, so I downloaded build 166 and installed, but it doesn't show up in my list of tuners...am I missing something? My 4 HDHomeRun tuners show, but not the prime...

muzicman0 · « **Reply #1 on:** April 10, 2013, 11:24:38 pm »

looks like I just didnt wait long enough...

muzicman0 · « **Reply #2 on:** April 10, 2013, 11:37:50 pm »

problem is it just says no signal, so it's still not working...

drmimosa · « **Reply #3 on:** April 11, 2013, 10:06:14 am »

I have this unit, it needs a good coax antenna to get a signal.

muzicman0 · « **Reply #4 on:** April 11, 2013, 10:24:57 am »

I have signal...been using it for months in WMC, with no issues on multiple PC's...but jriver says no signal...I'm guessing I am doing something wrong, but I don't know what it is. My HDHomeRun's (non-prime) seem to work fine.

Yaobing · « **Reply #5 on:** April 11, 2013, 03:16:39 pm »

The channel you were trying to play is "copy free"? If not, MC will not get any signal. If it is copy free, send me a log file. yaobing at jriver dot com

[EDIT] In case someone searches the forum and find this thread, there is a sticky thread which summarizes the instructions on how to use the device.. Please refer to that thread.

muzicman0 · « **Reply #6 on:** April 11, 2013, 04:01:43 pm »

yes, all of my channels are copy freely, and they also work in the HDHomeRun quick TV app. I will try to get a log tonight...how do I do that?

Yaobing · « **Reply #7 on:** April 11, 2013, 05:16:55 pm »

Quote from: muzicman0 on April 11, 2013, 04:01:43 pm

yes, all of my channels are copy freely, and they also work in the HDHomeRun quick TV app. I will try to get a log tonight...how do I do that?

http://yabb.jriver.com/interact/index.php?topic=52448.0

muzicman0 · « **Reply #8 on:** April 11, 2013, 07:54:05 pm »

log sent.

Yaobing · « **Reply #9 on:** April 12, 2013, 12:29:36 pm »

Quote from: muzicman0 on April 11, 2013, 07:54:05 pm

log sent.

Thanks for the log. It shows that a network call failed. Check your Firewall settings. Make sure the firewall gives MC full permission for network access.

muzicman0 · « **Reply #10 on:** April 12, 2013, 12:34:51 pm »

I'll double check, but I believe the firewall is turned off...at least the Windows firewall is.

muzicman0 · « **Reply #11 on:** April 12, 2013, 12:36:56 pm »

yep...I just checked, and the firewall is off. I'm a network engineer, so I can figure out communication issues...what IP is it failing to get to? I will make sure there is 2 way communication established and go from there.

Yaobing · « **Reply #12 on:** April 12, 2013, 04:10:26 pm »

Ok, maybe not a network issue then. It was failing to call an AVTransport service function, but was not failing other service functions.

0095021: 348: Reader: CWinINetReader::Open: Start
0095021: 348: Reader: CWinINetReader::Open: Opening http://192.168.0.71:4444/dri/tuner0/AVTransport
0095021: 3664: Reader: CWinINetReader::Thread: Start
0095021: 3664: Reader: CWinINetReader::Connect: Start
0095021: 3664: Reader: CWinINetReader::Connect: Finish (0 ms)
0095021: 3664: Reader: CWinINetReader::DownloadFromHTTPURL: Start
0095021: 3664: Reader: CWinINetReader::DownloadFromHTTPURL: Failed (header status code: 500)
0095021: 3664: Reader: CWinINetReader::DownloadFromHTTPURL: Success
0095021: 3664: Reader: CWinINetReader::DownloadFromHTTPURL: Finish (0 ms)
0095021: 3664: Reader: CWinINetReader::Thread: Finish (0 ms)
0095021: 348: Reader: CWinINetReader::Open: Finish (0 ms)
0095021: 348: Reader: CWinINetReader::Close: Start
0095021: 348: Reader: CWinINetReader::Close: Finish (0 ms)
0095021: 348: Sharing Plugins: CDLNADeviceConnectionStatus::NotifyCommunicatedWithDevice: Error communicating with device: HDHomeRun Prime Tuner 13173CA6-0

muzicman0 · « **Reply #13 on:** April 12, 2013, 04:32:24 pm »

If I enter that URL into chrome, I get the following response back:

This XML file does not appear to have any style information associated with it. The document tree is shown below.

So, obviously, no a http 500 response.

any other ideas?

Yaobing · « **Reply #14 on:** April 12, 2013, 05:17:40 pm »

Prior to that, I see this:

0095005: 348: Reader: CWinINetReader::Open: Start
0095005: 348: Reader: CWinINetReader::Open: Opening http://192.168.0.71:80/dri/AVTransport.xml
0095005: 5852: Reader: CWinINetReader::Thread: Start
0095005: 5852: Reader: CWinINetReader::Connect: Start
0095005: 5852: Reader: CWinINetReader::Connect: Finish (0 ms)
0095005: 5852: Reader: CWinINetReader::DownloadFromHTTPURL: Start
0095021: 5852: Reader: CWinINetReader::DownloadFromHTTPURL: Success
0095021: 5852: Reader: CWinINetReader::DownloadFromHTTPURL: Finish (16 ms)
0095021: 5852: Reader: CWinINetReader::Thread: Finish (16 ms)
0095021: 348: Reader: CWinINetReader::Open: Finish (16 ms)
0095021: 348: Reader: CWinINetReader::Open: Finish (16 ms)
0095021: 348: Reader: CWinINetReader::Read: InternetReadFile returned true with zero bytes read: EOF
0095021: 348: Reader: CWinINetReader::Close: Start
0095021: 348: Reader: CWinINetReader::Close: Finish (0 ms)

It seems all request for description xml file returned with 0 byte.

muzicman0 · « **Reply #15 on:** April 12, 2013, 05:34:46 pm »

ok...so any suggestions?

muzicman0 · « **Reply #16 on:** April 12, 2013, 05:37:00 pm »

just FYI, that URL returned the following:

Code: [Select]

<scpd xmlns="urn:schemas-upnp-org:service-1-0">
<specVersion>
<major>1</major>
<minor>0</minor>
</specVersion>
<actionList>
<action>
<name>SetAVTransportURI</name>
<argumentList>
<argument>
<name>InstanceID</name>
<direction>in</direction>
<relatedStateVariable>A_ARG_TYPE_InstanceID</relatedStateVariable>
</argument>
<argument>
<name>CurrentURI</name>
<direction>in</direction>
<relatedStateVariable>AVTransportURI</relatedStateVariable>
</argument>
<argument>
<name>CurrentURIMetaData</name>
<direction>in</direction>
<relatedStateVariable>AVTransportURIMetaData</relatedStateVariable>
</argument>
</argumentList>
</action>
<action>
<name>GetMediaInfo</name>
<argumentList>
<argument>
<name>InstanceID</name>
<direction>in</direction>
<relatedStateVariable>A_ARG_TYPE_InstanceID</relatedStateVariable>
</argument>
<argument>
<name>NrTracks</name>
<direction>out</direction>
<relatedStateVariable>NumberOfTracks</relatedStateVariable>
</argument>
<argument>
<name>MediaDuration</name>
<direction>out</direction>

So it didn't come back empty...or at least not this time.

Yaobing · « **Reply #17 on:** April 12, 2013, 05:50:20 pm »

The log shows that all such request for description returned with zero byte. I assume you did not post the complete file as it seems to be truncated. Do you see an action named "Play" in the xml file? I do see GetMediaInfo in the part you posted. These are the two we need to call.

I do not know what to suggest right now.

muzicman0 · « **Reply #18 on:** April 12, 2013, 05:54:07 pm »

yes, sorry, I didn't realize I did...there are 14 instances of the word play in the xml...here is the whole file:

EDIT: it wouldn't let me post the whole thing (>12000 characters)...here it is up until the last 'play' in the xml.

Code: [Select]

This XML file does not appear to have any style information associated with it. The document tree is shown below.
<scpd xmlns="urn:schemas-upnp-org:service-1-0">
<specVersion>
<major>1</major>
<minor>0</minor>
</specVersion>
<actionList>
<action>
<name>SetAVTransportURI</name>
<argumentList>
<argument>
<name>InstanceID</name>
<direction>in</direction>
<relatedStateVariable>A_ARG_TYPE_InstanceID</relatedStateVariable>
</argument>
<argument>
<name>CurrentURI</name>
<direction>in</direction>
<relatedStateVariable>AVTransportURI</relatedStateVariable>
</argument>
<argument>
<name>CurrentURIMetaData</name>
<direction>in</direction>
<relatedStateVariable>AVTransportURIMetaData</relatedStateVariable>
</argument>
</argumentList>
</action>
<action>
<name>GetMediaInfo</name>
<argumentList>
<argument>
<name>InstanceID</name>
<direction>in</direction>
<relatedStateVariable>A_ARG_TYPE_InstanceID</relatedStateVariable>
</argument>
<argument>
<name>NrTracks</name>
<direction>out</direction>
<relatedStateVariable>NumberOfTracks</relatedStateVariable>
</argument>
<argument>
<name>MediaDuration</name>
<direction>out</direction>
<relatedStateVariable>CurrentMediaDuration</relatedStateVariable>
</argument>
<argument>
<name>CurrentURI</name>
<direction>out</direction>
<relatedStateVariable>AVTransportURI</relatedStateVariable>
</argument>
<argument>
<name>CurrentURIMetaData</name>
<direction>out</direction>
<relatedStateVariable>AVTransportURIMetaData</relatedStateVariable>
</argument>
<argument>
<name>NextURI</name>
<direction>out</direction>
<relatedStateVariable>NextAVTransportURI</relatedStateVariable>
</argument>
<argument>
<name>NextURIMetaData</name>
<direction>out</direction>
<relatedStateVariable>NextAVTransportURIMetaData</relatedStateVariable>
</argument>
<argument>
<name>PlayMedium</name>
<direction>out</direction>
<relatedStateVariable>PlaybackStorageMedium</relatedStateVariable>
</argument>
<argument>
<name>RecordMedium</name>
<direction>out</direction>
<relatedStateVariable>RecordStorageMedium</relatedStateVariable>
</argument>
<argument>
<name>WriteStatus</name>
<direction>out</direction>
<relatedStateVariable>RecordMediumWriteStatus</relatedStateVariable>
</argument>
</argumentList>
</action>
<action>
<name>GetTransportInfo</name>
<argumentList>
<argument>
<name>InstanceID</name>
<direction>in</direction>
<relatedStateVariable>A_ARG_TYPE_InstanceID</relatedStateVariable>
</argument>
<argument>
<name>CurrentTransportState</name>
<direction>out</direction>
<relatedStateVariable>TransportState</relatedStateVariable>
</argument>
<argument>
<name>CurrentTransportStatus</name>
<direction>out</direction>
<relatedStateVariable>TransportStatus</relatedStateVariable>
</argument>
<argument>
<name>CurrentSpeed</name>
<direction>out</direction>
<relatedStateVariable>TransportPlaySpeed</relatedStateVariable>
</argument>
</argumentList>
</action>
<action>
<name>GetPositionInfo</name>
<argumentList>
<argument>
<name>InstanceID</name>
<direction>in</direction>
<relatedStateVariable>A_ARG_TYPE_InstanceID</relatedStateVariable>
</argument>
<argument>
<name>Track</name>
<direction>out</direction>
<relatedStateVariable>CurrentTrack</relatedStateVariable>
</argument>
<argument>
<name>TrackDuration</name>
<direction>out</direction>
<relatedStateVariable>CurrentTrackDuration</relatedStateVariable>
</argument>
<argument>
<name>TrackMetaData</name>
<direction>out</direction>
<relatedStateVariable>CurrentTrackMetaData</relatedStateVariable>
</argument>
<argument>
<name>TrackURI</name>
<direction>out</direction>
<relatedStateVariable>CurrentTrackURI</relatedStateVariable>
</argument>
<argument>
<name>RelTime</name>
<direction>out</direction>
<relatedStateVariable>RelativeTimePosition</relatedStateVariable>
</argument>
<argument>
<name>AbsTime</name>
<direction>out</direction>
<relatedStateVariable>AbsoluteTimePosition</relatedStateVariable>
</argument>
<argument>
<name>RelCount</name>
<direction>out</direction>
<relatedStateVariable>RelativeCounterPosition</relatedStateVariable>
</argument>
<argument>
<name>AbsCount</name>
<direction>out</direction>
<relatedStateVariable>AbsoluteCounterPosition</relatedStateVariable>
</argument>
</argumentList>
</action>
<action>
<name>GetDeviceCapabilities</name>
<argumentList>
<argument>
<name>InstanceID</name>
<direction>in</direction>
<relatedStateVariable>A_ARG_TYPE_InstanceID</relatedStateVariable>
</argument>
<argument>
<name>PlayMedia</name>
<direction>out</direction>
<relatedStateVariable>PossiblePlaybackStorageMedia</relatedStateVariable>
</argument>
<argument>
<name>RecMedia</name>
<direction>out</direction>
<relatedStateVariable>PossibleRecordStorageMedia</relatedStateVariable>
</argument>
<argument>
<name>RecQualityModes</name>
<direction>out</direction>
<relatedStateVariable>PossibleRecordQualityModes</relatedStateVariable>
</argument>
</argumentList>
</action>
<action>
<name>GetTransportSettings</name>
<argumentList>
<argument>
<name>InstanceID</name>
<direction>in</direction>
<relatedStateVariable>A_ARG_TYPE_InstanceID</relatedStateVariable>
</argument>
<argument>
<name>PlayMode</name>
<direction>out</direction>
<relatedStateVariable>CurrentPlayMode</relatedStateVariable>
</argument>
<argument>
<name>RecQualityMode</name>
<direction>out</direction>
<relatedStateVariable>CurrentRecordQualityMode</relatedStateVariable>
</argument>
</argumentList>
</action>
<action>
<name>Stop</name>
<argumentList>
<argument>
<name>InstanceID</name>
<direction>in</direction>
<relatedStateVariable>A_ARG_TYPE_InstanceID</relatedStateVariable>
</argument>
</argumentList>
</action>
<action>
<name>Play</name>
<argumentList>
<argument>
<name>InstanceID</name>
<direction>in</direction>
<relatedStateVariable>A_ARG_TYPE_InstanceID</relatedStateVariable>
</argument>
<argument>
<name>Speed</name>
<direction>in</direction>
<relatedStateVariable>TransportPlaySpeed</relatedStateVariable>
</argument>
</argumentList>
</action>
<action>
<name>Seek</name>
<argumentList>
<argument>
<name>InstanceID</name>
<direction>in</direction>
<relatedStateVariable>A_ARG_TYPE_InstanceID</relatedStateVariable>
</argument>
<argument>
<name>Unit</name>
<direction>in</direction>
<relatedStateVariable>A_ARG_TYPE_SeekMode</relatedStateVariable>
</argument>
<argument>
<name>Target</name>
<direction>in</direction>
<relatedStateVariable>A_ARG_TYPE_SeekTarget</relatedStateVariable>
</argument>
</argumentList>
</action>
<action>
<name>Next</name>
<argumentList>
<argument>
<name>InstanceID</name>
<direction>in</direction>
<relatedStateVariable>A_ARG_TYPE_InstanceID</relatedStateVariable>
</argument>
</argumentList>
</action>
<action>
<name>Previous</name>
<argumentList>
<argument>
<name>InstanceID</name>
<direction>in</direction>
<relatedStateVariable>A_ARG_TYPE_InstanceID</relatedStateVariable>
</argument>
</argumentList>
</action>
<action>
<name>GetCurrentTransportActions</name>
<argumentList>
<argument>
<name>InstanceID</name>
<direction>in</direction>
<relatedStateVariable>A_ARG_TYPE_InstanceID</relatedStateVariable>
</argument>
<argument>
<name>Actions</name>
<direction>out</direction>
<relatedStateVariable>CurrentTransportActions</relatedStateVariable>
</argument>
</argumentList>
</action>
</actionList>
<serviceStateTable>
<stateVariable sendEvents="no">
<name>TransportState</name>
<dataType>string</dataType>
<allowedValueList>
<allowedValue>STOPPED</allowedValue>
<allowedValue>PLAYING</allowedValue>
</allowedValueList>
</stateVariable>
<stateVariable sendEvents="no">
<name>TransportStatus</name>
<dataType>string</dataType>
<allowedValueList>
<allowedValue>OK</allowedValue>
<allowedValue>ERROR_OCCURRED</allowedValue>
</allowedValueList>
</stateVariable>
<stateVariable sendEvents="no">
<name>PlaybackStorageMedium</name>
<dataType>string</dataType>
<allowedValueList>
<allowedValue>NETWORK</allowedValue>
</allowedValueList>
</stateVariable>
<stateVariable sendEvents="no">
<name>RecordStorageMedium</name>
<dataType>string</dataType>
<allowedValueList>
<allowedValue>NOT_IMPLEMENTED</allowedValue>
</allowedValueList>
</stateVariable>
<stateVariable sendEvents="no">
<name>PossiblePlaybackStorageMedia</name>
<dataType>string</dataType>
</stateVariable>
<stateVariable sendEvents="no">
<name>PossibleRecordStorageMedia</name>
<dataType>string</dataType>
</stateVariable>
<stateVariable sendEvents="no">
<name>CurrentPlayMode</name>
<dataType>string</dataType>
<allowedValueList>
<allowedValue>NORMAL</allowedValue>
</allowedValueList>
</stateVariable>
<stateVariable sendEvents="no">
<name>TransportPlaySpeed</name>
<dataType>string</dataType>

Yaobing · « **Reply #19 on:** April 12, 2013, 05:59:54 pm »

Yeah, it is there. This was what I was looking for:

<action>
<name>Play</name>
<argumentList>
<argument>
<name>InstanceID</name>
...

I wonder why the call failed to get the info. I will investigate.

muzicman0 · « **Reply #20 on:** April 12, 2013, 06:01:04 pm »

thanks. And if you need anyone to help test stuff (specifically with the prime), let me know. happy to help.

bunglemebaby · « **Reply #21 on:** April 12, 2013, 06:24:35 pm »

FWIW, I am having a similar issue these days with my HDHomeRun (not sure if it's PRime or not off the top of my head). I can view live content via HDHomeRun's utility (that relies on WMP, I believe). I'd say it's been for the last month or two. I haven't posted as I don't really have time to do any proper debugging or log file submission (still don't, so this will remain a "me too" post).

muzicman0 · « **Reply #22 on:** April 13, 2013, 10:26:23 am »

Just FYI...I just tried this on my other PC, and same results. I thought I would list what I am doing, just in case I am missing something:

1) Fresh install of MC18
2) in Options, I am enabling DLNA (it seems without this, the prime's are not even detected)
3) load program guide data from mc2xml
4) attempt to watch TV
5) wait for 30 or so seconds, then the 'no signal' appears.

I also have 4 non prime hdhomerun's, but I have not even loaded guide data for them. I did verify that 192.168.0.71 is the prime IP address though.

Oh yeah, and I wasn't on the latest firmware, but I did go ahead and update to the latest before installing on this PC, with no change in behavior.

mm0

Yaobing · « **Reply #23 on:** April 13, 2013, 05:06:21 pm »

Thanks for the update. We have other people reporting the same result. So, it is not something you did or did not do.

bob · « **Reply #24 on:** April 15, 2013, 03:05:18 pm »

This may also be the URL validator bug, especially if it worked in build 18.0.164.

Yaobing · « **Reply #25 on:** April 15, 2013, 04:07:39 pm »

Quote from: bob on April 15, 2013, 03:05:18 pm

This may also be the URL validator bug, especially if it worked in build 18.0.164.

I don't think anyone verified that it worked in build 164. Although I did put the experimental support of the device in 164, it was not announced until 165.

muzicman0 · « **Reply #26 on:** April 16, 2013, 11:23:56 pm »

I tried the new released build with no change.

Yaobing · « **Reply #27 on:** April 17, 2013, 07:28:36 am »

That is right. Build 169 does not include a fix for it. Next release probably.

JimH · « **Reply #28 on:** April 17, 2013, 10:07:52 am »

Quote from: Yaobing on April 17, 2013, 07:28:36 am

That is right. Build 169 does not include a fix for it. Next release probably.

It's out now.

muzicman0 · « **Reply #29 on:** April 17, 2013, 10:11:05 am »

awesome, I will test when I get home.

muzicman0 · « **Reply #30 on:** April 17, 2013, 02:30:35 pm »

I had a few minutes, so I VNC'd into my home PC and installed the update. I am still getting the same symptoms.

mm0

Yaobing · « **Reply #31 on:** April 17, 2013, 05:58:54 pm »

Quote from: muzicman0 on April 17, 2013, 02:30:35 pm

I had a few minutes, so I VNC'd into my home PC and installed the update. I am still getting the same symptoms.

mm0

Please provide another log.

muzicman0 · « **Reply #32 on:** April 17, 2013, 07:13:53 pm »

log sent.

and as a note, http://192.168.0.71/dri/ConnectionManager.xml was not empty.

Yaobing · « **Reply #33 on:** April 18, 2013, 07:12:15 am »

Sorry, the log has not arrived. Can you try again? yaobing at jriver dot com

muzicman0 · « **Reply #34 on:** April 18, 2013, 09:53:16 am »

just sent again...let me know if it gets there...

Yaobing · « **Reply #35 on:** April 18, 2013, 11:39:13 am »

Sorry, still no log.

I wonder if it is caused by the log being too large for attachment.

To keep the log small, restart MC (close MC, and if you run Media Server, close Media Server, then start MC) and then go to run tests immediately. After the test, send the log immediately.

muzicman0 · « **Reply #36 on:** April 18, 2013, 11:42:02 am »

hmmm...that is what I did...it's only 191k. I will put it on my drop box, so you can download it...hope that's ok.

The link is:

https://dl.dropboxusercontent.com/u/8315882/Log.txt

Yaobing · « **Reply #37 on:** April 18, 2013, 12:11:23 pm »

This time it went a lot further. We no longer are failing the AVTransport service calls. However the video is not streaming.

muzicman0 · « **Reply #38 on:** April 18, 2013, 03:34:52 pm »

Is there any more information that I can get you to help?

Yaobing · « **Reply #39 on:** April 18, 2013, 04:08:57 pm »

Thanks for asking. I can not think of anything right now. When I figure out what I need, I will ask.

aiwntrmute · « **Reply #40 on:** April 21, 2013, 07:27:06 pm »

I have an HDHomerun Prime and have an exact same issue. Symptoms and log file output are identical.

Walter

muzicman0 · « **Reply #41 on:** April 22, 2013, 12:48:10 pm »

I am assuming that nothing in .171 addresses this issue...correct?

Yaobing · « **Reply #42 on:** April 22, 2013, 01:02:51 pm »

That is correct.

muzicman0 · « **Reply #43 on:** April 23, 2013, 02:02:43 pm »

I got your request via email, and have attempted to send the logs to you, but for whatever reason, they are being returned to me now. I am responding to your original email, so I know I didn't mis-type your address. Do you have an alternate email I can respond to?

Yaobing · « **Reply #44 on:** April 23, 2013, 02:46:04 pm »

Quote from: muzicman0 on April 23, 2013, 02:02:43 pm

I got your request via email, and have attempted to send the logs to you, but for whatever reason, they are being returned to me now. I am responding to your original email, so I know I didn't mis-type your address. Do you have an alternate email I can respond to?

I PM'd you an alternative email.

aiwntrmute · « **Reply #45 on:** April 26, 2013, 08:45:34 am »

Do you need me to send my logs as well?

I'm still in my trial period and the only reason that's stopping me from purchasing is that the software does not work with hdhomerun prime...

Walter.

Yaobing · « **Reply #46 on:** April 26, 2013, 09:48:01 am »

Quote from: aiwntrmute on April 26, 2013, 08:45:34 am

Do you need me to send my logs as well?

I'm still in my trial period and the only reason that's stopping me from purchasing is that the software does not work with hdhomerun prime...

Walter.

Please do send a log. Make sure you are using the latest build on MC18 board.

verfan · « **Reply #47 on:** May 14, 2013, 12:29:19 am »

Is the HomeRun Prime working properly now?

nadafinga · « **Reply #48 on:** May 15, 2013, 01:31:45 am »

Same problem here. Trying out JRiver because I'm frustrated with WMC, namely not being able to set up MadVR for live TV and constantly having to re-do my channel line-up.

Anyways, I have a Ceton InfiniTV4 PCIE and a HD Home Run Prime. I've let JRiver through the firewall and turned on DLNA. In the television setup tab under options, it doesn't see either/any of the tuners.

Edit: I'm also on Comcast, and all my channels are copy freely.

Yaobing · « **Reply #49 on:** May 15, 2013, 09:55:17 am »

Quote from: nadafinga on May 15, 2013, 01:31:45 am

Same problem here. Trying out JRiver because I'm frustrated with WMC, namely not being able to set up MadVR for live TV and constantly having to re-do my channel line-up.

Anyways, I have a Ceton InfiniTV4 PCIE and a HD Home Run Prime. I've let JRiver through the firewall and turned on DLNA. In the television setup tab under options, it doesn't see either/any of the tuners.

Edit: I'm also on Comcast, and all my channels are copy freely.

You should see both Ceton and HDHR Prime. You need to wait a couple of minutes after starting MC. Do you see the Prime under "Playing Now" (after other DLNA devices show up there)? I might have let Prime slip through my filter and show up there. I know Ceton used to show up there until I filtered it out. When you see the Prime under Playing Now, you should see both Ceton and the Prime under Television options.

Ceton should work. Prime is still not working right (last time someone reported back).

INTERACT FORUM

Author Topic: HDHomeRun Prime (Read 52300 times)