INTERACT FORUM

Please login or register.

Login with username, password and session length
Advanced search  
Pages: 1 2 3 4 [5]   Go Down

Author Topic: Feature Requests  (Read 30496 times)

TAJ-767

  • Recent member
  • *
  • Posts: 14
Re: Feature Requests
« Reply #200 on: November 14, 2020, 07:28:02 pm »

Please extend the podcast search capability from searching a single feed to searching across all feeds.
Logged

markf2748

  • Regular Member
  • Citizen of the Universe
  • *****
  • Posts: 804
Re: Feature Requests
« Reply #201 on: November 15, 2020, 12:31:24 am »

I guess I wouldn't mind if the Control Bar stayed visible while my mouse was on the left, bottom, or right edge, as it does with the top edge. The issue with that though is that if you move the mouse out of the way and it hits an edge, the Control bar stays visible and covers some of the screen. As it is now, it just displays briefly and then closes. I think that is why it works as it currently does, to not permanently cover some of the screen.
? I see no reason to move mouse out of the way in Display View since the mouse pointer vanishes about 1 second after you stop moving it, wherever it is.

I can see a use case for having the Mini View Control Bar pop out and then automatically close for at least one of the edges.  The problem with current Left, Bottom, Right behavior is the "on time" is too short, about 1 second, and it tends to blink.  If the Mini View remained visible for about 5 seconds and then disappeared that would allow enough time to comfortably read the track information without any additional mouse motion to remove it.  If the Mini View "slid" slowly back, that would add an additional cool factor 8) .  This may qualify for an under-one-hour fix :) .

Logged

RoderickGI

  • MC Beta Team
  • Citizen of the Universe
  • *****
  • Posts: 8186
Re: Feature Requests
« Reply #202 on: November 15, 2020, 01:31:14 am »

? I see no reason to move mouse out of the way in Display View since the mouse pointer vanishes about 1 second after you stop moving it, wherever it is.

I meant physically move the mouse out of the way, or put an Airmouse down, and some other pointing device, all of which could consequently move the pointer on the screen, possibly to an edge.

A longer delay makes a lot more sense. Five seconds sounds good, or maybe three would be enough. Yeah, I think three. It does sound like a quick change.
Logged
What specific version of MC you are running:MC27.0.27 @ Oct 27, 2020 and updating regularly Jim!                        MC Release Notes: https://wiki.jriver.com/index.php/Release_Notes
What OS(s) and Version you are running:     Windows 10 Pro 64bit Version 2004 (OS Build 19041.572).
The JRMark score of the PC with an issue:    JRMark (version 26.0.52 64 bit): 3419
Important relevant info about your environment:     
  Using the HTPC as a MC Server & a Workstation as a MC Client plus some DLNA clients.
  Running JRiver for Android, JRemote2, Gizmo, & MO 4Media on a Sony Xperia XZ Premium Android 9.
  Playing video out to a Sony 65" TV connected via HDMI, playing digital audio out via motherboard sound card, PCIe TV tuner

MarcelM

  • Member
  • *
  • Posts: 1
Re: Feature Requests
« Reply #203 on: November 17, 2020, 11:15:27 am »

I use both JRiver and Plex. I prefer JRiver for playing hi-res pcm and dsd audio on a high quality audio system, because it does not touch the bit stream. Plex tends to transcode certain audio and I can hear the difference with high quality recordings. However, for remote and mobile access I prefer Plex over JRiver, because you know who is using the system and what they are accessing.
I am surprised I cannot find any usage and security monitoring within JRiver MC. For security reasons it would be nice to be able to see which remote users and IP adresses are using JRiver MC and which media they are accessing.
At this moment I monitor and log the connections to JRiver with a separate TCP viewer on the host system. However, I still think MC should provide some basic usage and security information in de GUI.
For the rest I am very satisfied with JRiver MC.
Logged

lepa

  • MC Beta Team
  • Citizen of the Universe
  • *****
  • Posts: 2033
Re: Feature Requests
« Reply #204 on: November 18, 2020, 01:46:18 pm »

Add cover art folder configuration for video files also (series & movies etc) to prevent NAS traffic when browsing (helps with MC jamming with disk access when NAS is sleeping)

Quick mockup:
Logged

mwillems

  • MC Beta Team
  • Citizen of the Universe
  • *****
  • Posts: 5233
  • "Linux Merit Badge" Recipient
Re: Feature Requests
« Reply #205 on: November 23, 2020, 10:14:17 am »

Currently when a MC server has both authentication enabled and read-only access for everyone enabled, there's no way for library clients to select whether they want to connect read-only or authenticated.  That means that clients with saved authentication credentials seem to "choose" one of the two at random (at least in my testing), and clients without saved credentials can only connect read-only (there's no way to even get to a credential prompt on the client when the server has read-only access enabled). 

I would like a setting in desktop MC (probably in library manager) called "connect to server using:" and then have a toggle that can be switched between "authentication (if possible)" or "read only".  If you toggle the setting, the client would then disconnect and reconnect with the specified configuration. 

The use case is that I want most of my clients/remotes to connect read-only, but I want some "trusted" clients to be able to connect to the server with authentication.  To be clear, I'm *not* asking for a similar setting for remotes like Panel or JRemote as that would present some challenges, I'm just looking for an option for desktop MC Library Clients.

For more discussion see this thread: https://yabb.jriver.com/interact/index.php/topic,127119.0.html
Logged

Soundwave

  • Recent member
  • *
  • Posts: 42
Re: Feature Requests
« Reply #206 on: January 17, 2021, 12:49:00 pm »

My Ultimate List for V27:


2. Opus tagging for MC and JRemote native support



This and the PEQ DSP upgrades from this thread: https://yabb.jriver.com/interact/index.php/topic,127946.0.html would take JRiver up a massive tier.

I want to do away with my MP3 conversions for ages (Opus works fine in UAPP for Android), the last thing I need it for is JRiver. Opus plows MP3 to irrelevancy, and I hope we'll one day see it supported properly on JRiver. My biggest wish for 2021 :]
Logged

bytestar

  • MC Beta Team
  • Citizen of the Universe
  • *****
  • Posts: 1286
  • Alpha/Betatester
Re: Feature Requests
« Reply #207 on: February 02, 2021, 09:46:17 am »

Autoscroll for conversion window Detail View.

Just a small thing but it would be very handy if the conversion window > Details would scroll automatically and you don't have to scroll to the current file all the time.
Logged
Official Microsoft © product tester.
Download the latest language file https://1drv.ms/u/s!AnQ3L_bTnnzv4otXL9-G4rUj9wX6Tw?e=TLGgjb (is constantly updated)

rbmjr

  • World Citizen
  • ***
  • Posts: 124
Re: Feature Requests - Why do Playlists restart like this?
« Reply #208 on: February 05, 2021, 07:34:13 am »

Here is a brief summary of MC27 playlist behavior. Lets say I send a playlist of 100 songs to my DLNA renderer I listen to 25 tracks tonight, stop playback, saving the remaining songs for another day. Return the next day and click "Clear Played from Playing Now", followed by "Remove from List" for Track 25 [see previous post about "Clear Played from Playing Now"]. Now I am ready to resume playing the playlist that I started yesterday. So I select Track 26 and click either "Play" or "Play from here" and this is what happens; Track 26 plays, Track 26 plays again, then Track 28, 29, 30... play. Track 27 is never played it is just skipped over. Can this be looked into?
Logged

v_erich

  • World Citizen
  • ***
  • Posts: 120
Re: Feature Requests
« Reply #209 on: February 12, 2021, 04:36:21 pm »

Hi JRiver team,

I use JRiver since v18 and at the moment most of the time in my cellar homecinema.
I tried with external DSP hard/software to improve the soundquality.
One of the things I cannot do with JRiver currently is to have more steep low- and highpass filters for the woofer and other channels.
In my high quality setup I can hear if the low frequency signal is coming from the front channel (e.g. car on the left with bass) or coming from my bass array (coming from everywhere in the front).
If I use external crossover and move to higher order (eg. 48 or better 96db/octave) I cannot hear the "wrong" directional informations from the bass array anymore - it sounds like coming out of the original channel.
So is it possible to get more than 24dB filters for multichannel sound in the room correction of the dsp?

Nice would be additional 48 and even 96dB/oct low- and highpass filters

Thanks and BR,
Erich
Logged

Matt

  • Administrator
  • Citizen of the Universe
  • *****
  • Posts: 42323
  • Shoes gone again!
Re: Feature Requests
« Reply #210 on: February 15, 2021, 09:20:33 am »

I use JRiver since v18 and at the moment most of the time in my cellar homecinema.
I tried with external DSP hard/software to improve the soundquality.
One of the things I cannot do with JRiver currently is to have more steep low- and highpass filters for the woofer and other channels.
In my high quality setup I can hear if the low frequency signal is coming from the front channel (e.g. car on the left with bass) or coming from my bass array (coming from everywhere in the front).

Next build:
Changed: The highpass slope used by Room Correction can be 36 or 48 dB/octave now (was capped at 24 dB/octave).

If there's anything else you're looking for, please let us know.

Thanks for the suggestion.
Logged
Matt Ashland, JRiver Media Center

dtc

  • MC Beta Team
  • Citizen of the Universe
  • *****
  • Posts: 3097
Re: Feature Requests
« Reply #211 on: February 15, 2021, 09:35:07 am »

Next build:
Changed: The highpass slope used by Room Correction can be 36 or 48 dB/octave now (was capped at 24 dB/octave).

If there's anything else you're looking for, please let us know.

Thanks for the suggestion.

How about allowing a slope of 48 dB/octave for the low pass filter for DSD to PCM conversions for the 30 KHz and 50 KHz filters. The current 24 dB/octave slopes are not steep enough.  A 50 KHz filter with a 48 dB/octave slope would correspond to the old Sony standard.

Thanks.
Logged

Matt

  • Administrator
  • Citizen of the Universe
  • *****
  • Posts: 42323
  • Shoes gone again!
Re: Feature Requests
« Reply #212 on: February 15, 2021, 09:40:50 am »

How about allowing a slope of 48 dB/octave for the low pass filter for DSD to PCM conversions for the 30 KHz and 50 KHz filters. The current 24 dB/octave slopes are not steep enough.  A 50 KHz filter with a 48 dB/octave slope would correspond to the old Sony standard.

Thanks.

Sure!

Next build:
Changed: When picking DSD low pass filters, the choice of 48 dB/octave is offered for the 30 kHz and 50 kHz values.
Logged
Matt Ashland, JRiver Media Center

dtc

  • MC Beta Team
  • Citizen of the Universe
  • *****
  • Posts: 3097
Re: Feature Requests
« Reply #213 on: February 15, 2021, 09:48:29 am »

Sure!

Next build:
Changed: When picking DSD low pass filters, the choice of 48 dB/octave is offered for the 30 kHz and 50 kHz values.

Awesome! It is not a common issue, but great to now have that option.  Thanks!
Logged

v_erich

  • World Citizen
  • ***
  • Posts: 120
Re: Feature Requests
« Reply #214 on: February 15, 2021, 10:21:33 am »

Quote
Next build:
Changed: The highpass slope used by Room Correction can be 36 or 48 dB/octave now (was capped at 24 dB/octave).

Thanks a lot!

BR
Erich
Logged

LilyAarseth

  • World Citizen
  • ***
  • Posts: 156
Re: Feature Requests
« Reply #215 on: February 15, 2021, 03:32:12 pm »

This might be a weird question but, would it be possible to make an alphabet bar on the right side of the list view of all artists? Sort of like JRemote has and it being clickable. Would be super useful for large libraries.
Logged

Dawgincontrol

  • MC Beta Team
  • Citizen of the Universe
  • *****
  • Posts: 679
  • We have met the enemy and he is us.
Re: Feature Requests
« Reply #216 on: February 15, 2021, 08:07:11 pm »

At the top in Standard View, Where it says Artists (or any delineation) with a down arrow, click the down arrow.

Select Customize View.  In the pop-up box under settings, check-mark the box beside Display an alphabet.
Logged

LilyAarseth

  • World Citizen
  • ***
  • Posts: 156
Re: Feature Requests
« Reply #217 on: February 16, 2021, 05:00:38 am »

At the top in Standard View, Where it says Artists (or any delineation) with a down arrow, click the down arrow.

Select Customize View.  In the pop-up box under settings, check-mark the box beside Display an alphabet.
I tried it and it doesn't work the way I had in mind, it jumps to the nearest first letter of a song, not first corresponding letter of an album artist that I wanted.
Logged

Dawgincontrol

  • MC Beta Team
  • Citizen of the Universe
  • *****
  • Posts: 679
  • We have met the enemy and he is us.
Re: Feature Requests
« Reply #218 on: February 18, 2021, 11:26:45 am »

Are you sure you're under Audio>Artists in Standard View?

Mine goes to the first Artist of the letter selected.
Logged

saltanar

  • Recent member
  • *
  • Posts: 22
Re: Feature Requests
« Reply #219 on: February 20, 2021, 12:02:10 pm »

Some requests:

1. International language for trailers, not only english

2. user interface more user friendly like mediaportal or kodi.

3. better movie scanning accuracy , search movies info using just file names.

   
Logged

Purecut

  • World Citizen
  • ***
  • Posts: 106
Re: Feature Requests
« Reply #220 on: March 01, 2021, 08:26:48 am »

Please add support to read from mp3 files the ID2.3 the tag filed "TPE4". From FLAC files the "MIXARTIST" will be read perfect but there is no support for the MP3 Tag field "TPE4".
Logged

lello

  • MC Beta Team
  • Citizen of the Universe
  • *****
  • Posts: 561
Re: Feature Requests
« Reply #221 on: March 15, 2021, 01:59:40 am »

As mentioned in this thread https://yabb.jriver.com/interact/index.php/topic,128769.0.html, I would like that in video mode> advanced> aspect ratio in addition to stretch, crop and auto, there was also "crop black bars 2.35" function very useful for those who have a 21: 9 aspect ratio screen and cannot let madvr do the black bar detection for 4k movies, because it has a not very powerful video card.
Logged

PhDSM

  • Regular Member
  • World Citizen
  • ***
  • Posts: 193
Re: Feature Requests
« Reply #222 on: March 18, 2021, 02:32:37 am »

Another request  : Getting More from WaveForm

I think Waveform is a great feature in MC, however, I think it is  under-exploited.
It would be a real plus if we could have "WaveFrom list style"  in order to see several waveforms together
See example attached

regards

Phil

Logged

jjazdk

  • World Citizen
  • ***
  • Posts: 140
Re: Feature Requests
« Reply #223 on: March 18, 2021, 11:58:51 am »

Please implement an option for partitioning in the convolver.

Thread is here:
https://yabb.jriver.com/interact/index.php/topic,128931.0.html
Logged
Working on my 12 channel JRiver entertainment center :-)

tij

  • MC Beta Team
  • Citizen of the Universe
  • *****
  • Posts: 1563
Re: Feature Requests
« Reply #224 on: March 18, 2021, 02:32:20 pm »

Any chance at updating LAV filter to handle lots and lots of audio and subtitle tracks in mkv?

https://yabb.jriver.com/interact/index.php/topic,122640.msg858758.html#msg858758
Logged
HTPC: Win11 Pro, MC: latest 31(64b), NV Driver: v425.31, CPU: i9-12900K, 32GB RAM, GeForce: 2080ti
Screen: LG 2016 E6
NAS: FreeNAS 11.1, SuperMicro SSG-5048R-E1CR36L, E5-1620v4, 64GB ECC RAM, 18xUltrastar He12-SAS3 drives, 2x240GB SSD (OS)

lello

  • MC Beta Team
  • Citizen of the Universe
  • *****
  • Posts: 561
Re: Feature Requests
« Reply #225 on: March 31, 2021, 03:24:33 am »

As mentioned in this thread https://yabb.jriver.com/interact/index.php/topic,128769.0.html, I would like that in video mode> advanced> aspect ratio in addition to stretch, crop and auto, there was also "crop black bars 2.35" function very useful for those who have a 21: 9 aspect ratio screen and cannot let madvr do the black bar detection for 4k movies, because it has a not very powerful video card.

also, I found that with films with different aspect ratios, such as Nolan's, JRiver's cropping is better than madvr's.

Is there any chance of seeing this feature added in one of the next builds?

Thanks for the work you do.
Logged

tdot

  • Recent member
  • *
  • Posts: 34
Re: Feature Requests
« Reply #226 on: March 31, 2021, 08:15:25 am »

On Panel, using the back arrow to go back to the previous page now brings to the top of the page.  It would be nice to bring you back to the previous position.
Logged

tij

  • MC Beta Team
  • Citizen of the Universe
  • *****
  • Posts: 1563
Re: Feature Requests
« Reply #227 on: April 02, 2021, 09:35:17 am »

Cover art for grouping.

In views, when we group by some field, displayed groups are shown as stacks of items inside that group.

Exceptions are Artist, Album, Serie, Season ... for which MC will look for cover art inside specific folder that matches field name (e.g. fot Series field, MC look for cover art in cover art folder inside "Series" subfolder)

Is it possoble to extend this behavior to all fields? For example if i have custom field "Box Set" ... then in the View, i group things by "Box Set" ... MC will:

1. Look for cover art inside "Box Set" folder (located in designated Cover Art folder) ... and use that image for grouping
2. If that folder does not exist ... or specific item does not have cover art in that folder ... then MC revert to default behaviour of showing stack items

This will give so much custmomization possibilities. At the moment ppl who wants this behavior ... have to tag things around fields that support this behaviour (Artist, Album, Series, Season)

I recall a thread where "Artist" field was used for game console type ... in order to have cover art specific for that console (PS2, XBOX, etc) ... while it works, it feels more like patch work rather than true organization of your files by proper tags.

Additionally ... the limit of nested group in this fashion is limited to 2 ... Artist/Album or Series/Season

Hopefully this will be considered
Logged
HTPC: Win11 Pro, MC: latest 31(64b), NV Driver: v425.31, CPU: i9-12900K, 32GB RAM, GeForce: 2080ti
Screen: LG 2016 E6
NAS: FreeNAS 11.1, SuperMicro SSG-5048R-E1CR36L, E5-1620v4, 64GB ECC RAM, 18xUltrastar He12-SAS3 drives, 2x240GB SSD (OS)

SkGe

  • Galactic Citizen
  • ****
  • Posts: 433
Re: Feature Requests
« Reply #228 on: April 03, 2021, 04:10:42 am »

Some feature request to be implemented in feature.
Ability to edit the album tooltip;
Overlay images;
Artist/Composer images in tag window;
Remove the text info bellow the images in tag window if is an audio/video file and keep it for images. (The information is already there if you hoover the mouse)
Logged

MikeO3

  • Junior Woodchuck
  • **
  • Posts: 95
Re: Feature Requests
« Reply #229 on: April 03, 2021, 08:05:16 am »

Are you sure you're under Audio>Artists in Standard View?

Mine goes to the first Artist of the letter selected.
Here is the behavior on mine. It jumps to the 1st letter but it really should be the moved the 1st item not mid row.
Logged

lepa

  • MC Beta Team
  • Citizen of the Universe
  • *****
  • Posts: 2033
Re: Feature Requests
« Reply #230 on: April 05, 2021, 05:11:16 am »

MC in Client mode to download and show <img src> images from the server when needed. If images are inside tooltip folder then the folder structure will also match on both server and client. Currently you need to all the time manually sync images from the server to the client PC
Logged

BradC

  • World Citizen
  • ***
  • Posts: 207
Re: Feature Requests
« Reply #231 on: April 14, 2021, 12:35:57 am »

Hi

I am another one that would greatly appreciate an improved convolver. I am trying to again get jriver playing via WDM and OpenLive through convolved filters for my active speakers. I also get frequent glitches that also cause the video to lose lipsync.

So I would also like to see partitions implemented in the convolver to reduce latency.

Perhaps implementing AVX-512 extensions would help with the processing involved. See here https://www.alcf.anl.gov/sites/default/files/2019-07/slides%20jeongnim%20kim%20FFT_MKL_Applications_4.pdf

More importantly would be to stop the glitches and long buffers needed when playing from the WDM driver and openlive.

Brad
Logged

BradC

  • World Citizen
  • ***
  • Posts: 207
Re: Feature Requests
« Reply #232 on: April 14, 2021, 03:44:32 am »

Zero latency convolution, as described here

http://blog.reverberate.ca/post/zero-latency-convolution/

as implemented in BruteFIR would also be great.

Brad
Logged

This2ShallPass

  • World Citizen
  • ***
  • Posts: 239
  • "I picked a helluva day to install MC!"
Re: Feature Requests
« Reply #233 on: April 23, 2021, 12:41:36 pm »

Request: Manage shared files using a client (it would still be the server doing the sharing, but you could share/unshare using a client).
Logged

bytestar

  • MC Beta Team
  • Citizen of the Universe
  • *****
  • Posts: 1286
  • Alpha/Betatester
Re: Feature Requests
« Reply #234 on: June 02, 2021, 06:27:57 am »

Please add "Advanced Audio Coding (AAC)" Encoder, for many audio files Lossy format is sufficient for me.

Sorry I did not make myself clear I mean encoder support for AAC not ALAC
Logged
Official Microsoft © product tester.
Download the latest language file https://1drv.ms/u/s!AnQ3L_bTnnzv4otXL9-G4rUj9wX6Tw?e=TLGgjb (is constantly updated)

David Sydney

  • Galactic Citizen
  • ****
  • Posts: 377
Re: Feature Requests
« Reply #235 on: June 02, 2021, 06:32:53 am »

Please add support for "Advanced Audio Coding (AAC)", for many audio files Lossy format is sufficient for me.

Already exists? First one listed under Options, Files Types?

Logged
Dave
------
Linux Manjaro 24 / Windows 10 Pro | i7 14700K Gigabyte Z790 UD AX | JRMark 10253 | Realtek Integrated HDAudio SPDIF | PC Sound = 1/ Yamaha TSS-15 5.1 Speaker System, 2/ SMSL SU-1 DAC + TA-66 Tube Headphone Amp + Klipsch ProMedia Heritage 2.1 Speakers | HiFi Sound = 1/ Network DLNA to WiiM Ultra Streamer + Advaned Paris A10 Amp in Music Room, 2/ DLNA to Yamaha RX-V777 AV Receiver in Living Room & Outside Deck, 3/ DLNA to Paired Yamaha WiFi WX-010 MusicCast Speakers to Outside Areas

bytestar

  • MC Beta Team
  • Citizen of the Universe
  • *****
  • Posts: 1286
  • Alpha/Betatester
Re: Feature Requests
« Reply #236 on: June 03, 2021, 12:23:01 pm »

Sorry I did not make myself clear I mean encoder support for AAC not ALAC

Already exists? First one listed under Options, Files Types?
Logged
Official Microsoft © product tester.
Download the latest language file https://1drv.ms/u/s!AnQ3L_bTnnzv4otXL9-G4rUj9wX6Tw?e=TLGgjb (is constantly updated)

mkolmar

  • Recent member
  • *
  • Posts: 40
Re: Feature Requests
« Reply #237 on: June 04, 2021, 06:38:35 pm »

Request to stay on currently selected track when search is cleared.

Enter search terms, select album or track, click X to clear search. Desired behavior: Land on the album/track that was selected. Actual behavior: You lose your place even if you started to play the selected track/album.
Logged
Pages: 1 2 3 4 [5]   Go Up